Professional Documents
Culture Documents
com
FAN1112
1A 1.2V Low Dropout Linear Regulator
Features Description
• Low dropout voltage The FAN1112 is a 1.2V low dropout three-terminal
• Load regulation: 0.05% typical regulator with 1A output current capability. The device has
• Trimmed current limit been optimized for low voltage where transient response and
• On-chip thermal limiting minimum input voltage are critical.
• Standard SOT-223 and TO-252 packages
• Three-terminal fixed 1.2V Current limit is trimmed to ensure specified output current
and controlled short-circuit current. On-chip thermal limiting
Applications provides protection against any combination of overload and
ambient temperatures that would create excessive junction
• Post regulator for switching supplies temperatures.
• Supply for low-voltage processors
Unlike PNP type regulators where up to 10% of the output
current is wasted as quiescent current, the quiescent current
of the FAN1112 flows into the load, increasing efficiency.
Typical Application
FAN1112
Pin Assignments
Front View
Tab is VOUT
Front View
3 IN
Tab is 1 2 3
VOUT 2 OUT
1 GND
GND OUT IN
*With package soldered to 0.5 square inch copper area over backside ground plane or internal power plane., ΘJA can vary from
30°C/W to more than 50°C/W. Other mounting techniques may provide better thermal resistance than 30°C/W.
1.2
1.0
0.8
IOUT (A)
0.6
0.4
0.2
0
0 2 4 6 8 10 12 14 16 18 20
VIN – VOUT (V)
Electrical Characteristics
Operating Conditions: VIN ≤ 7V, TJ = 25°C unless otherwise specified.
The • denotes specifications which apply over the specified operating temperature range.
1.5 0.10
∆I = 1A
1.2
0
1.1
1.0 TJ = 0°C
-0.05
0.9
TJ = 25°C
0.8 TJ = 125°C -0.10
0.7
0.6 -0.15
0.5
0 -0.20
0 0.2 0.4 0.6 0.8 1.0 -75 -50 -25 0 25 50 75 100 125 150 175
OUTPUT CURRENT (A) JUNCTION TEMPERATURE (°C)
Figure 2. Dropout Voltage vs. Output Current Figure 3. Load Regulation vs. Temperature
1.225 5
1.220
1.210
1.205 3
1.200
1.195 2
1.190
1.185 1
1.180
1.175 0
-75 -50 -25 0 25 50 75 100 125 150 175 -75 -50 -25 0 25 50 75 100 125 150 175
JUNCTION TEMPERATURE (°C) JUNCTION TEMPERATURE (°C)
Figure 4. Reference Voltage vs. Temperature Figure 5. Minimum Load Current vs. Temperature
100 2.0
90
SHORT-CIRCUIT CURRENT (A)
ADJUST PIN CURRENT (µA)
80
1.75
70
60
50 1.5
40
30
1.25
20
10
0 1.0
-75 -50 -25 0 25 50 75 100 125 150 175 -75 -50 -25 0 25 50 75 100 125 150 175
JUNCTION TEMPERATURE (°C) JUNCTION TEMPERATURE (°C)
Figure 6. GND Pin Current vs. Temperature Figure 7. Short-Circuit Current vs. Temperature
80
RIPPLE REJECTION (dB)
70
7.5
60
POWER (W)
TO-252
50
5
40
30
SOT-223
2.5
20 (VIN - VOUT) = 3V
0.5 < VRIPPLE < 2V
10 IOUT = 1A
0 0
10 100 1K 10K 100K 25 45 65 85 105 125
FREQUENCY (Hz) CASE TEMPERATURE (°C)
Mechanical Dimensions
4-Lead SOT-223 Package
Inches Millimeters
Symbol Notes
Min. Max. Min. Max.
A — .071 — 1.80
A1 — .181 — 4.80
B .025 .033 .640 .840
c — .090 — 2.29
D .248 .264 6.30 6.71
E .130 .148 3.30 3.71
e .115 .124 2.95 3.15
F .033 .041 .840 1.04
H .264 .287 6.71 7.29
I .012 — .310 —
J — 10° — 10°
K 10° 16° 10° 16°
L .0008 .0040 .0203 .1018
M 10° 16° 10° 16°
N .010 .014 .250 .360
A
H E J N
M
B I L
A1
c F
E
@PKG/ L3
@HEATSINK
b3 c2
D
H E-PIN
b2 L4
L1
L
b
e
α = 0° – 10°
-B- -A-
A
-C-
Ordering Information
Product Number Package
FAN1112D TO-252
FAN1112S SOT-223
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO
ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME
ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems 2. A critical component in any component of a life support
which, (a) are intended for surgical implant into the body, device or system whose failure to perform can be
or (b) support or sustain life, and (c) whose failure to reasonably expected to cause the failure of the life support
perform when properly used in accordance with device or system, or to affect its safety or effectiveness.
instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the
user.
www.fairchildsemi.com
9/27/01 0.0m 007
Stock#DS30001112
2001 Fairchild Semiconductor Corporation