Professional Documents
Culture Documents
DESCRIPTION
FEATURES
APPLICATIONS
NOMENCLATURE
AMS1117
Device
S:SOT-89-3L
Package ADJ: Adjustable output
: SOT-223-3L 1.2: Fixed output 1.2V
CD: TO-252-2L 1.5: Fixed output 1.5V
: SOT-89-3L 1.8: Fixed output 1.8V
2.5: Fixed output 2.5V
3.3: Fixed output 3.3V
5.0: Fixed output 5.0V
www.umw-ic.com 1 友台半导体有限公司
AMS1117
et 1A LDO Voltage Regulator
BLOCK DIAGRAM
VIN
3
TSD
Current
Limit
VOUT
BandGap 2
Fixed: F1 and F2 connect, disconnect A
F1
F2 Adj: A connect, F1 and F2 disconnect
1
A
ADJ/GND
Note1: The maximum allowable power dissipation is a function of maximum operating junction temperature, TJ (max), the junction to ambient
thermal resistance, Rja, and the ambient temperature Tamb. The maximum allowable power dissipation at any ambient temperature is given:
PD (max) = (TJ (max) - Tamb)/ Rja, exceeding the maximum allowable power limit will result in excessive die temperature; thus, the regulator will go
into thermal shutdown. The junction to ambient thermal resistance, θJA of some packages may be different, The value of θJA depends on
mounting technique.
www.umw-ic.com 2 友台半导体有限公司
AMS1117
et 1A LDO Voltage Regulator
ELECTRICAL CHARACTERISTICS
AMS1117-1.5,
1.477 1.500 1.5221
IOUT=10mΑ, VIN=3.5V ,TJ=25C V
1.470 1.500 .530
10mA≤IOUT≤1A, 3.0V≤VIN≤10V
AMS1117-1.8,
1.7731 1.800 1.827
IOUT=10mA, VIN=3.8V, TJ=25C , V
.746 1.800 1.854
0≤IOUT≤1A, 3.2V≤VIN≤10V
Output Voltage VOUT
AMS1117-2.5,
2.462 2.500 2.538
IOUT=10mA, VIN=4.5V,TJ=25C , V
2.450 2.500 2.550
0≤IOUT≤1A, 3.9V≤VIN ≤10V
AMS1117-3.3,
3.250 3.300 3.349
IOUT=10mA, VIN=5V,TJ=25C , V
3.235 3.300 3.365
0≤IOUT≤1A, 4.75V≤VIN≤10V
AMS1117-5.0,
4.925 5.000 5.075
IOUT=10mA, VIN=7V, TJ=25C , V
4.900 5.000 5.10
0≤ IOUT≤1A, 6.5V≤VIN≤12V
Output Voltage
TSOUT -- 0.3 -- %
Temperature Stability
VINMIN ≤VIN≤ 12V,
Line Regulation Rline -- 9 18 mV
VOUT=Fixed/Adj,IOUT=10mA
Load Regulation Rload 10mA≤IOUT≤1A, VOUT=Fixed/Adj -- 10 18 mV
IOUT=100mA 1.00 1.20
Dropout Voltage Vdrop IOUT=500mA -- 1.05 1.25 V
IOUT=1A 1.20 1.30
Quiescent Current Iq 4.25V≤VIN≤ 6.5V -- 5 10 mA
fRIPPLE=120Hz, (VIN-VOUT)=3V,
Ripple Rejection PSRR 60 75 -- dB
VRIPPLE=1VPP
Adjust pin Current Iadj -- 60 120 A
Adjust pin Current Change 0≤ IOUT≤1A, 1.4V ≤VIN-VOUT≤10V -- 0.2 5 A
Thermal shutdown TSD -- 150 -- °C
Current limitting Ilimit 2.1 -- 2.5 A
Temperature Stabiliy -- 0.5 -- %
Long Term Stability TA=125°C, 1000Hrs -- 0. 3 -- %
www.umw-ic.com 3 友台半导体有限公司
AMS1117
et 1A LDO Voltage Regulator
PIN CONFIGURATION
1117 CD STK17
AMS1117 3.3 KXXX
3.3 xxxx 3.3 XXXX
1 2 3
1 2 3
1 2 3
VIN
VOUT
ADJ/GND
VIN
VOUT
ADJ/GND
VIN
VOUT
ADJ/GND
PIN DESCRIPTION
FUNCTION DESCRIPTION
The AMS1117 is a LDO regulator, it’s pass transistor is made up of a single NPN transistor being driven by a PNP.
The dropout voltage is defined as: VDROP = VBE+ VSAT.
The AMS1117 series of fixed and adjustable regulators are easy to use. Output voltages are 1.2V, 1.5V, 1.8V, 2.5V,
3.3V, and 5.0V.On-chip thermal shut down provides protection against any combination of overload and ambient
temperature that would create excessive junction temperature.
The AMS1117 requires an output capacitor for device stability. Its value of 22F tantalum covers all cases of
bypassing the adjustment terminal. Without bypassing the adjustment terminal smaller capacitors can be used with
equally good results which depend upon the application circuit. In general, linear regulator stability decreases with
higher output currents.
www.umw-ic.com 4 友台半导体有限公司
AMS1117
et 1A LDO Voltage Regulator
AMS1117-ADJ
VIN VIN VOUT VOUT
ADJ
10F R1 22F
R2
VOUT=V REF x (1+R2/R1)+I ADJ x R2
Note: The circuit and parameters are reference only, please set the parameters of the real application circuit based on the real
test.
TYPICAL CHARACTERISTICS
2.0 100
90
1.5
Output voltage change(%)
80
Adjust pin current (A)
1.0
70
0.5
60
0 50
-0.5 40
-1.0 30
20
-1.5
10
-2.0
-50 -25 0 25 50 75 100 125 150 0
-50 -25 0 25 50 75 100 125 150
Temperature(C)
Temperature(C)
www.umw-ic.com 5 友台半导体有限公司
AMS1117
et 1A LDO Voltage Regulator
0.3 9.50
CIN =10F CIN =1F
Output voltage
Input voltage
COUT =10F tantalum
deviation(V)
deviation(V)
8.50
0.1 VIN =6.5V IOUT =0.1A
Preload=100mA 7.50
0
-0.1 6.50
-0.2 40
20
Output Voltage
deviation (mV)
current (A)
0.5
0
Load
0 -20
-0.5 -40
0 50 100 0 20 40 60 80 100 120 140 160 180 200
Time(s) Time(s)
100 12
90 fRIPPLER=120Hz
VRIPPLE3Vpp 10
80
Power Dissipation(W)
Ripple relection(dB)
15
0
-40 -20 0 20 40 60 80
100 120 140
Ambient Temperature(°C)
www.umw-ic.com 6 友台半导体有限公司
AMS1117
et 1A LDO Voltage Regulator
PACKAGE OUTLINE
SOT-223-3L UNIT: mm
5.90~6.70
3.00±0.20
0.30±0.10
0.90~1.15
0.25
3.50±0.30
7.00±0.30
2.30 TYP +0.15
0.70
-0.10
4.60±0.15
0~10°
0.00~0.10
1.60±0.15
1.65±0.15
SOT-89-3L UNIT: mm
4.50±0.30
1.50±0.20
4.155±0.40
2.45±0.30
1.00±0.20
3.00BSC
www.umw-ic.com 7 友台半导体有限公司
AMS1117
et 1A LDO Voltage Regulator
PACKAGE OUTLINE (continued)
TO-252-2L UNIT: mm
NOTE1:There are two conditions for this position:has an eject pin or has no eject pin.
www.umw-ic.com 8 友台半导体有限公司