Professional Documents
Culture Documents
Industrial processes are responsible Improved energy efficiency in industrial Benefits at a glance
for using about 50 % of the global heat processes can lead to substantial
energy produced, while another 46 % primary energy savings and subsequent – Reduced primary energy cost
is used for space and water heating. reduction of CO 2 emissions. Heat – Eco-friendly heat production
Decarbonization of the thermal energy pumps will provide an important – Reliable production of
segment is therefore key to achieving mechanism to convert low and high hot water up to 140 °C and
our climate goals. temperature waste heat to useful steam up to 20 bar / 280 °C
high-quality process heat. – Unit production capacity
up to 90 MWth
3 Compressor
4 Motor
Energy &
storage
systems
Eco-friendly, reliable
and efficient Cold side Heat pump Hot side
Industries
(Hot water, steam)
Different types of heat transfer fluids Natural: Hot water or steam Compressor system Driver Piping
with focus on natural refrigerants can – Sea / river water supply for industries: – Radial geared or inline compressor – Electrical motor – Of the complete heat pump loop
be offered for special applications – Air – Chemicals – Multi-stage design – Frequency converter for starting – Interconnecting piping
under consideration of: – Geothermal energy – Petrochemicals – Single casing multi-service design and control purpose – Process valves and instruments
– Refineries – Separate steam compression system
– Environmental aspects Industrial: – Pulp & paper for higher steam pressures Condenser stage Auxiliaries
– Very low global warming – Process waste heat streams – Food & beverage – IGV or speed control – Shell & tube heat exchangers – Separate lube oil unit
potential (GWP) – Process liquid waste streams – Base frame mounted – Condenser – Flash box / economizer
– Zero ozone depletion – Cooling water District heating: – Fully packaged and tested – Condenser subcooler
potential (ODP) – Sewage water – Municipals Services
– Safety concepts – Data centers – Utilities Control system Evaporator stage – Site services
– Public or private facilities – Process control system for – Shell & tube heat exchangers – Long-term service agreements
(e.g. hospitals, universities, control and operation of the – Evaporator – Training
industrial areas) complete heat pump unit – Superheater
– Interface to plant DCS
– Anti-surge control
Technical data (per single heat pump unit) of compressor unit
– Advanced digital services
for remote operation,
Unit MHP real time monitoring and
Thermal heat capacity MWth 10 – 90 predictive maintenance
per module MMBtu/h 34 – 307
Heat sink temperature range °C 60 – 280
(hot water / steam*) °F 140 – 536
Steam pressure bar Standard up to 20*,
higher pressure on request