Professional Documents
Culture Documents
NEW LEVEL
OF EFFICIENCY
HOME HEATING PRODUCT RANGE
OIL / RENEWABLES / CYLINDERS
HEAD OFFICE
Warmflow House
Lissue Industrial Estate
Moira Road
Lisburn
BT28 2RF
Northern Ireland
T: +44 (0) 2892 621 515
sales@warmflow.co.uk
GREAT BRITAIN
Warmflow House, Unit C4
Stafford Park 4,
Telford,
TF3 3BA
England
T: +44 (0) 1952 607 750
salesgb@warmflow.co.uk
INTERNATIONAL
Avda. de Los Castros, 33
Portal 2 – 1B
Santander
39005
Cantabria
Spain
T: +34 (0) 942 140 623
info@warmflow.es
Warmflow Engineering Company Limited is a family owned company where reputation and integrity are paramount. We maintain a policy of continuous
product improvement and reserve the right to change specification without notice. The statutory rights of the consumer are not affected. This brochure
should only be used for sales purposes. Please consult the installation instructions, available on request, before installing or specifying a Warmflow product.
6665 ISSUE D www.warmflow.co.uk
50 YEARS OF HEATING
Warmflow has created
innovative, award-winning
home heating products for
over 50 years.
All Warmflow products are made at our state of the art
manufacturing facility in Lisburn. Our extensive range of home
heating products offer value for money, fuel efficiency, ease of
installation and top class customer care.
Our products have been independently tested and accredited. Our range of appliances exceed the minimum ErP efficiency
requirements and comply with Document L1A, L1B (England & Wales), The Building Standards (Scotland) Regulations Section
6, Approved Document Part F (Northern Ireland) and with the HARP efficiency requirements for Part L (Republic of Ireland).
1 2
OIL BOILERS
Our outstanding selection of high
efficiency, internal and external oil-fired
boilers including the only AA-rated oil
boiler will keep your customers and their
loved ones warm and cosy during the
chilly months ahead.
I have been fitting warmflow boilers for several years and can not fault them one bit. Competitive
price and a high quality build. The warmflow team could not be more helpful unlike competitors.
Nice as an installer to have regular contact and professional development with a team
determined to make the installation of an oil fired boiler as easy and painless for both installer
and consumer. Highly recommended.
3 4
AVAILABLE AS
£250
New slimline design integrates seamlessly
into any kitchen or utility room INTERNAL SYSTEM INTERNAL COMBI
WORTH OF I21 S / I26 S / I33 S I21 C / I26 C / I33 C
FACTORY-FITTED EXTRAS • Riello low NOx technology • AA Rating on M & XL load profile
Latest Riello low NOx technology • Factory-fitted Grundfos UPM3 FLEX AS circulating pump • Riello low NOx technology
See page 10 for more details. exceeding legislative requirements • 12l Expansion vessel • Factory fitted Grundfos UPM3 FLEX AS circulating pump
• Factory-fitted automatic air vent • 24l Factory-fitted, hinged, expansion vessel
• Factory-fitted 3-bar safety valve • Low component count
• DHW Expansion vessel
• DCW Inlet shut-off valve
Range of outputs from 15 – 44kW • Factory-fitted DCW pressure reducing valve
• Push-in O-ring fittings
• Slimline design
• Integrated 7-day programmer
• Patented design
*Figures based on manufacturer's official ErP Data Published June 18
5 6
AVAILABLE AS
£250
Latest Riello low NOx technology
exceeding legislative requirements EXTERNAL SYSTEM EXTERNAL COMBI
WORTH OF E21 S / E26 S / E33 S E21 C / E26 C / E33 C
FACTORY-FITTED EXTRAS • Riello low NOx technology • AA Rating on M & XL load profile
• Factory-fitted Grundfos UPM3 FLEX AS circulating pump • Riello low NOx technology
See page 10 for more details.
Range of outputs from 15 – 44kW • 12l Expansion vessel • Factory fitted Grundfos UPM3 FLEX AS circulating pump
• Factory-fitted automatic air vent • 24l Factory-fitted, hinged, expansion vessel
• Factory-fitted 3-bar safety valve • Low component count
• DHW expansion vessel
• DCW inlet shut-off valve
• Factory-fitted DCW pressure reducing valve
• Push-in O-ring fittings
• Slimline design
• Integrated 7-day programmer
*Figures based on manufacturer's official ErP Data Published June 18 • Patented design
7 8
THE NEXT
GENERATION PROFESSIONAL
OF OIL BOILERS
Teddington fire valve Oil line installation kit ADEY Magnaclean Pre Wired Grundfos Includes 2 Bottles
with 9m capillary† with a Crossland oil filter pro 2 filter UPM3 Flex AS of Inhibitor
Circulating Pump
All boilers are compatible with biofuel however they must be commissioned on site and the †
9m capillary as standard with an Internal boiler, 3m capillary as standard with an External boiler.
flexible fuel line(s), nozzle and fuel filter replaced. Please contact Warmflow for further details. *
Subject to terms and conditions. Visit www.warmflow.co.uk for more details.
9 10
EXTERNAL
MODEL Model Output Flue Options C/F ErP Height Depth Width Connections Service DHW
SPECIFICATIONS (kW) size
(mm)
Rating (mm) (mm) (mm) Access Flow
(l/min)
CH DHW Flow Return E33 27-33 L,R or rear. Optional Top n/a A n/a n/a 900 700 413 28mm 1" BSP front n/a
M XL E44 33-44 L,R or rear. Optional Top n/a A n/a n/a 1155 876 595 1¼" BSP 1¼" BSP front n/a
HEAT ONLY
I21 15-21 C/F, low/ high/ vertical B/F 100 A n/a n/a 865 602 413 28mm 1" BSP front n/a PRE PUMPED
I26 21-27 C/F, low/ high/ vertical B/F 100 A n/a n/a 865 602 413 28mm 1" BSP front n/a E21P 15-21 L,R or rear. Optional Top n/a A n/a n/a 900 700 413 28mm 22mm front n/a
I33 27-33 C/F, low/ high/ vertical B/F 100 A n/a n/a 865 602 413 28mm 1" BSP front n/a E26P 21-27 L,R or rear. Optional Top n/a A n/a n/a 900 700 413 28mm 22mm front n/a
I44 33-44 C/F, low/ high/ vertical B/F 100 A n/a n/a 1155 872 595 1¼" BSP 1¼" BSP front n/a E33P 27-33 L,R or rear. Optional Top n/a A n/a n/a 900 700 413 28mm 28mm front n/a
E44P 33-44 L,R or rear. Optional Top n/a A n/a n/a 1155 876 595 28mm 1¼" BSP front n/a
PRE PUMPED
I21P 15-21 C/F, low/ high/ vertical B/F 100 A n/a n/a 865 602 413 28mm 22mm front n/a SYSTEM
I26P 21-27 C/F, low/ high/ vertical B/F 100 A n/a n/a 865 602 413 28mm 22mm front n/a E21S 15-21 L,R or rear. Optional Top n/a A n/a n/a 900 700 413 28mm 22mm front n/a
I33P 27-33 C/F, low/ high/ vertical B/F 100 A n/a n/a 865 602 413 28mm 28mm front n/a E26S 21-27 L,R or rear. Optional Top n/a A n/a n/a 900 700 413 28mm 22mm front n/a
I44P 33-44 C/F, low/ high/ vertical B/F 100 A n/a n/a 1155 872 595 28mm 1¼" BSP front n/a E33S 27-33 L,R or rear. Optional Top n/a A n/a n/a 900 700 413 28mm 28mm front n/a
SYSTEM COMBI
I21S 15-21 C/F, low/ high/ vertical B/F 100 A n/a n/a 865 602 413 28mm 22mm front n/a E21C 15-21 L,R or rear. Optional Top n/a A A A 900 700 550 22mm 22mm front/top 18
I26S 21-27 C/F, low/ high/ vertical B/F 100 A n/a n/a 865 602 413 28mm 22mm front n/a E26C 21-27 L,R or rear. Optional Top n/a A A A 900 700 550 22mm 22mm front/top 22*
I33S 27-33 C/F, low/ high/ vertical B/F 100 A n/a n/a 865 602 413 28mm 28mm front n/a E33C 27-33 L,R or rear. Optional Top n/a A A A 900 700 550 22/28mm 22/28mm front/top 24*
COMBI PROFESSIONAL
I21C 15-21 C/F, low/ high/ vertical B/F 100 A A A 865 602 515 22mm 22mm front/top 18 E21PPRO 15-21 L,R or rear. Optional Top n/a A n/a n/a 900 700 413 28mm 22mm front n/a
I26C 21-27 C/F, low/ high/ vertical B/F 100 A A A 865 602 515 22mm 22mm front/top 22* E26PPRO 21-27 L,R or rear. Optional Top n/a A n/a n/a 900 700 413 28mm 22mm front n/a
I33C 27-33 C/F, low/ high/ vertical B/F 100 A A A 865 602 515 22/28mm 22/28mm front/top 24* E33PPRO 27-33 L,R or rear. Optional Top n/a A n/a n/a 900 700 413 28mm 28mm front n/a
E21SPRO 15-21 L,R or rear. Optional Top n/a A n/a n/a 900 700 413 28mm 22mm front n/a
PROFESSIONAL
E26SPRO 21-27 L,R or rear. Optional Top n/a A n/a n/a 900 700 413 28mm 22mm front n/a
I21PPRO 15-21 C/F, low/ high/ vertical B/F 100 A n/a n/a 865 602 413 28mm 22mm front n/a
E33SPRO 27-33 L,R or rear. Optional Top n/a A n/a n/a 900 700 413 28mm 28mm front n/a
I26PPRO 21-27 C/F, low/ high/ vertical B/F 100 A n/a n/a 865 602 413 28mm 22mm front n/a
E21CPRO 15-21 L,R or rear. Optional Top n/a A A A 900 700 550 22mm 22mm front/top 18
I33PPRO 27-33 C/F, low/ high/ vertical B/F 100 A n/a n/a 865 602 413 28mm 28mm front n/a
E26CPRO 21-27 L,R or rear. Optional Top n/a A A A 900 700 550 22mm 22mm front/top 22*
I21SPRO 15-21 C/F, low/ high/ vertical B/F 100 A n/a n/a 865 602 413 28mm 22mm front n/a
E33CPRO 27-33 L,R or rear. Optional Top n/a A A A 900 700 550 22/28mm 22/28mm front/top 24*
I26SPRO 21-27 C/F, low/ high/ vertical B/F 100 A n/a n/a 865 602 413 28mm 22mm front n/a
I33SPRO 27-33 C/F, low/ high/ vertical B/F 100 A n/a n/a 865 602 413 28mm 28mm front n/a BOILER HOUSE
I21CPRO 15-21 C/F, low/ high/ vertical B/F 100 A A A 865 602 515 22mm 22mm front/top 18 B21 15-21 C/F, low/ high/ vertical B/F 100 A n/a n/a 697 600 395 1" BSP 1" BSP front n/a
I26CPRO 21-27 C/F, low/ high/ vertical B/F 100 A A A 865 602 515 22mm 22mm front/top 22* B26 21-27 C/F, low/ high/ vertical B/F 100 A n/a n/a 697 600 395 1" BSP 1" BSP front n/a
I33CPRO 27-33 C/F, low/ high/ vertical B/F 100 A A A 865 602 515 22/28mm 22/28mm front/top 24* B33 27-33 C/F, low/ high/ vertical B/F 100 A n/a n/a 697 600 395 1" BSP 1" BSP front n/a
*Remove flow restrictor for above 18l/min. Output dependent on incoming pressure/volume. *Remove flow restrictor for above 18l/min. Output dependent on incoming pressure/volume.
11 12
In instances where discharging
flue gasses at low level may cause
a problem, such as in a small
courtyard or narrow passageway,
a Plume Management Kit may
MANAGEMENT KITS
features extensions and bends
in 80mm black UV-stabilised
polypropylene and also includes
adjustable mounting brackets.
Terminal Extension 45° bend (3499) 87° bend (3458) 860mm extension (3457) Adjustable bracket (3460)
(1025)
Note: The Utility (Internal) Plume Management Kit (U-PMK) is designed to extend an FBF flue kit. Both an FBF and U-PMK are required to assemble the
Starter complete flue.
Piece
Terminal
Terminal
Guard HE FLUE KIT ACCESSORIES
Terminal
85
100
Boiler
120
Adapter 440
940
Assembled length Assembled length Effective length = 0.5m Effective length = 1.0m
Starter Starter F3 - 1000mm extension pipe F4 - 500mm extension pipe F7 - 45° bend F8 - 87° bend
Piece Piece
° °
150
Boiler Boiler
Adapter Adapter
Ø 152
Horizontal Flue Kit (FBF) Vertical Flue Kit (VBF) High Level Flue Kit (HBF) F10 - conventional flue adapter F11 - pitched roof flashing F12 - flat roof flashing F14 - terminal guard
13 14
FLEXI LINER KITS & ACCESSORIES
With Warmflow's flexible flue liners, connecting a condensing boiler All 4 kits include:
to an existing chimney couldn't be easier. No separate combustion
air supply is needed as our flue liners use the chimney for the supply • boiler adapter
of combustion air, providing a room-sealed installation. • vertical starter piece
• flue fittings kit
With the Agentis range, you don't need to carry different flue • flue thermostat
systems for different jobs - with us, one flue will fit all our boilers. • chimney closure plate
• terminal section
Four kits are available in a choice of either 6 metre or 10 metre • flexible liner
flexible sections, with either vertical or horizontal entry options. • liner spacers and couplings
The connection between the boiler and chimney is made using
Warmflow’s plastic flue system, so both the flexible liner within
the chimney and the rigid flue connecting the boiler can easily be Horizontal kits also include:
cut to length as required. • 2 x 0.5 metre balanced flue extensions
• 1 x 87° balanced flue bend
Flexi Liner Kits are suitable for all indoor models up to 26kW.
For outputs in excess of 26kW, please consult our Customer • 1 x 87° liner support elbow
Care Centre.
Vertical kits also include:
• 1 x 0.5 metre balanced flue extension
TRIPLE COIL TR290V TWIN COIL TW240UV HEAT PUMP HP200UV TWIN COIL TW170UV INDIRECT 140UV DIRECT DI110UV
17 18
INDIRECT CYLINDER (UNVENTED)
Available in six sizes from 110 to 290 litres to suit the vast In order to achieve the best performance from our unvented
majority of domestic installations, our Indirect models are the cylinders, the mains water supply must be capable of supplying
core of our cylinder range. a flow rate of at least 20 litres per minute with a dynamic
pressure of at least 1.5 bar. Should the supply performance be
Thanks to their large surface area and high performance heat less than this the hot water flow rates will be reduced, however
exchange coils, the Indirect models boast impressive heat-up a Warmflow unvented cylinder may still be installed and the
times - the 170 litre model taking just 25 minutes to reach 60ºC benefits of a fast heat-up time and minimal heat losses can still
from cold. be enjoyed.
Our Indirect models, like the rest of the unvented range, are
designed to be fed directly from the mains water supply via the
inlet group supplied, which is capable of receiving incoming water
at pressures up to a maximum of 16 bar.
ø544
EASE OF INSTALLATION
Our cylinders are supplied with all the necessary parts for a quick, easy, professional installation. We supply
only high-quality components from recognised, market-leading suppliers.
A
B
C
D
E
COMPONENTS SUPPLIED INCLUDE 60º
• Inlet group complete with strainer, pressure-reducing valve, Available in Indirect, Twin Coil, Twin Coil
balanced cold connection (except vented) (Vented), Triple Coil (Vented), Direct and
• Incoloy 3kW immersion heater(s) Heat Pump models
INDIRECT CYLINDER
• 2 Port zone valve (except Direct, Heat Pump & vented models) IN110UV IN140UV IN170UV IN200UV IN240UV IN290UV
• E xpansion vessel complete with hanging bracket (except Vented Volumes from 110 to 290 litres DIMENSIONS
models)
(A) Height (mm) 830 1005 1205 1380 1655 1940
(B) Secondary return connection (mm) - - - 1080 1355 1640
(C) Primary coil upper connection (mm) 451 511 605 605 657 728
Duplex stainless steel construction (D) Primary coil lower connection (mm) 168 228 228 228 279 351
(E) Cold Inlet Connection (mm) 168 228 228 228 228 228
OPERATING DATA
PERFORMANCE
Primary coil rating @ 15L/min (kW) 10.15 12.91 17.51 16.81 15.72 14.66
High performance rigid coils Heat up time (EN12897) (mins) 23 26 25 33 42 49
ERP RATING C C C C C C
19 20
TWIN COIL CYLINDER (UNVENTED) TRIPLE COIL CYLINDER (VENTED)
Our Twin Coil unvented models have all the features and OurTriple Coil vented cylinders feature a total of three 22mm ø544
benefits of the Indirect models but come with an additional coil heat exchanger coils. This flexibility means that, for example,
for use with a renewable heat source, or an additional boiler. the cylinder might be heated by a solar thermal system via the
The models feature large dedicated renewable volumes, making ø544 renewable coil, a wood pellet boiler supplying the primary coil and
them suitable for use with solar thermal systems in line with the a back-up oil or gas boiler on the tertiary coil.
recommendations in the Domestic Building Services Compliance
Guide.
The renewable coil (the lower of the two coils) has a large
surface area to maximise the use of available low grade heat
from a renewable resource. The immersion heater and cylinder
thermostats for both coils are supplied. Twin Coil models (200
litres & above) feature a dedicated 22mm connection for use with
a secondary return (pumped circulation).
60º
DIMENSONS
TRIPLE COIL
(B) Secondary return
- 1080 1355 1640
connection (mm) TR240V TR290V
(E) Renewable coil (C) Tertiary coil upper connection (mm) 1290 1573
511 605 605 605
upper connection (mm)
(D) Primary coil upper connection (mm) 1008 1195
(F) Renewable coil lower
228 228 228 228
connection (mm) (E) Tertiary coil lower connection (mm) 988 1145
(G) Cold Inlet (F) Primary coil lower connection (mm) 705 768
228 228 228 228
Connection
(G) Renewable coil upper connection (mm) 605 605
OPERATING DATA
(H) Cold inlet connection (mm) 228 228
Cold water capacity
165 194 233 281
(litres) (I) Renewable coil lower connection (mm) 228 228
OPERATING DATA
Weight when full (kg) 210 240 290 350
A
Cold water capacity (litres) 233 281
Standing heat loss
1.66 1.97 2.12 2.26
B
(kWh/24h) Weight when full (kg) 290 350
C
Dedicated renewable Standing heat loss (kWh/24h) 2.16 2.30
83 97 117 141
volume (litres) D
A Dedicated renewable volume (litres) 96 107
PERFROMANCE E
B
PERFORMANCE
Primary coil rating @ C F
14.27 14.35 14.28 14.64
15L/min (kW) Primary coil rating @ 15L/min (kW) 14.36 17.68
D G
Renewable coil rating @ Renewable coil rating @ 15L/min (kW) 16.42 15.43
12.33 16.62 16.47 15.82 E
15L/min (kW) H
F Tertiary coil rating @ 15L/min (kW) 14.44 18.67
Primary heat up time I
19 22 29 35
(EN12897) (mins) G Primary heat up time (EN12897) (mins) 33 34
21 22
TWIN COIL CYLINDER (VENTED) DIRECT CYLINDER (UNVENTED)
Our Twin Coil vented models have all the features and benefits of The electrically heated Direct cylinders are designed for
the Indirect models but come with an additional coil for use with a instances where the use of fossil fuels is impractical or
solar heat source, or an additional boiler. The models feature large unavailable. Featuring two immersion heaters, one heating the
dedicated renewable volumes, making them suitable for use with ø544 entire cylinder volume and the other heating a boost volume at
solar thermal systems in line with the recommendations in the the top, the cylinders are able to make use of the Economy 7
Domestic Building Services Compliance Guide. tariff in order to minimise the cost of hot water.
The renewable coil (the lower of the two coils) has a large If used in this way, the cylinder should be sized to provide the
surface area to maximise the use of available low grade heat complete anticipated daily hot water use, thereby reducing the
from a renewable resource. The immersion heater and cylinder use of the boost element which runs on the more expensive
thermostats for both coils are supplied. Twin Coil models (200 standard tariff.
litres & above) feature a dedicated 22mm connection for use with
a secondary return (pumped circulation).
60º
DIMENSIONS A
B
(B) Secondary return
1080 1355 1640
connection (mm)
Standing heat loss (C) Upper immersion (mm) 393 481 581 668 806 948
1.97 2.12 2.26 B
(kWh/24h)
(D) Lower immersion (mm) 239 239 239 239 239 239
Dedicated renewable C
97 117 141
volume (litres)
D (E) Cold inlet connection (mm) 228 228 228 228 228 228
PERFORMANCE
23 24
RENEWABLE ENERGY
High-efficiency, low emission
appliances with a range of outputs to
suit any installation.
25 26
Why Warmflow Zeno?
R32
REFRIGERANT GAS
ELECTRONIC CONTROLLED
QUIET OPERATION EXPANSION VALVES
All products are Quiet mark approved with super Optimising system efficiency by allowing
quiet operation. Sound level as low as 54db (A). the heat pump to run at a range of flow
temperatures and capacities.
Using technology which is similar to that which is used in a common household fridge, our Zeno heat pump harnesses the natural HIGH TEMPERATURE OUTPUT
heat energy from the air by blowing it through a highly finned evaporator coil. The heat pump then increases the temperature and BUILT IN HIGH EFFICIENCY PUMP
Flow temperature up to 60ºC means domestic hot
the heat is used to provide heating & hot water for your home. All Warmflow Zeno air source heat pumps come with Warmlink, Fully integrated Grundfos high efficiency pump for water (DHW) can be produced without the need
Warmflow's cloud based remote control technology which provides effortless and easy to use remote control access for engineers. the heating circuit. for additional heat sources.
27 28
AS03–R32 395 997
1315
805
437
490
650
SPECIFICATIONS
750 PRODUCT DATA AS01 AS02 AS03
Width 1002 955 1000
Dimensions
Depth 490 460 440
(mm)
Height 805 915 1315
AS02–R32 423 953
Weight (kg) 90 108 157
Electrical Supply 230V Single Phase@50Hz 230V Single Phase@50Hz 230V Single Phase@50Hz
Maximum Current (Amps) 13 22 33
Nominal Sound Level (dBA)* 37.54 42.55 44.58
kW @ A7W35 8.3 12.5 20.5
915
(35°C / 55°C)^
29 30
PACK 1
Code Description
AS01 K1 Zeno AS01 with Pack 1
AS02 K1 Zeno AS02 with Pack 1
AS03 K1 Zeno AS03 with Pack 1
PACK 2 PACK 3
ZENO INVERTER DRIVEN AIR SOURCE ZENO INVERTER DRIVEN AIR SOURCE
HEAT PUMP & 240ltr CYLINDER HEAT PUMP & 290ltr CYLINDER
Includes 240ltr twin coil heat pump cylinder, Full flow 3 port Includes 290ltr twin coil heat pump cylinder, Full flow 3 port
valve body & actuator, Adey Magnclean 28mm, Ethylene Glycol valve body & actuator, Adey Magnclean 28mm, Ethylene Glycol
conc 25l drum, 24ltr round expansion vessel c/w bracket, 50ltr conc 25l drum, 24ltr round expansion vessel c/w bracket, 50ltr
insulated buffer tank , Flexi foot support (x 2) insulated buffer tank , Flexi foot support (x 2)
In addition, we offer a range of custom packs which include our very own Warmflow branded twin coil heat pump cylinder offering ZENO INVERTER DRIVEN AIR SOURCE ZENO INVERTER DRIVEN AIR SOURCE
further value and a 1 stop shop to ensure your installation is as easy as possible. All the packs have been designed to enhance value HEAT PUMP & 170ltr CYLINDER HEAT PUMP & 200ltr CYLINDER
for our customers and include only the finest quality, market leading branded goods.
Includes 170ltr twin coil heat pump cylinder, Full flow 3 port Includes 200ltr twin coil heat pump cylinder, Full flow 3 port
Our range of custom packs are detailed in the tables:
valve body & actuator, Adey Magnclean 28mm, Ethylene Glycol valve body & actuator, Adey Magnclean 28mm, Ethylene Glycol
conc 25l drum, 24ltr round expansion vessel c/w bracket, 50ltr conc 25l drum, 24ltr round expansion vessel c/w bracket, 50ltr
insulated buffer tank , Flexi foot support (x 2) insulated buffer tank , Flexi foot support (x 2)
ZENO INVERTER DRIVEN AIR SOURCE HEAT PUMP MODELS
Code Description Code Description
Includes controller, pump, heated drip tray, 1" x Y strainer, 1 x flexi hose kit, 2 x 1" isolating ball valve, 2 x 1" Male to Female Elbows AS01 K4 Zeno AS01 with Pack 4 AS01 K5 Zeno AS01 with Pack 4
AS02 K4 Zeno AS02 with Pack 4 AS02 K5 Zeno AS02 with Pack 4
Code Description
AS03 K4 Zeno AS03 with Pack 4 AS03 K5 Zeno AS03 with Pack 4
AS01 Zeno 8kW ASHP
AS02 Zeno 12kW ASHP
AS03 Zeno 20kW ASHP
31 32
Setting up WarmLink access on your smartphone, tablet or
electronic device couldn’t be easier with a simple to use app
available on google play or apple app store. Simply download the
app, connect your device and start enjoying the benefits of remote
control access to your Zeno air source heat pump.
WARMLINK
WarmLink is Warmflow’s cloud based technology which provides effortless, easy to use remote control
technology for homeowners and engineers. WarmLink allows users to control and monitor their Warmflow
Zeno air source heat pump remotely or from the comfort of their sofa.
ERROR CODES
APP CONTROL
In the unlikely event of a fault, your engineer will be
Fully control your appliance via your smartphone, able to remotely review error codes allowing for
tablet or PC. more efficient diagnosis and speedy response
33 34
UP
TO 18kW
Single phase
electricity supply
890
GROUND SOURCE HEAT PUMPS 591 661
35 36
KEY FEATURES
At Warmflow we pride ourselves on our innovation and customer focus so we designed our biomass
boiler to meet all possible performance demands.
Patented door-mounted
pot for ease of cleaning
and maintenance
Factory-fitted boiler
anti condensing valve
Biomass boilers are very similar to conventional gas boilers that you will be familiar with, providing you with
space heating and hot water for the entire home, but instead of using gas to produce the heat, they combust
Unique patented automated Powerful programmer with unique
sustainably sourced wood pellets. pot cleaning blades maintain features to assist the installation,
greater combustion efficiency running and servicing
Using wood in place of fossil fuels helps to prevent long-term climate change, since the carbon dioxide released during the combustion was
actually absorbed while the tree was growing, so they are essentially carbon neutral.
The Warmflow Zeno biomass wood pellet boiler has been uniquely designed for ease of installation & homeowner use ensuring it meets USER FRIENDLY CONTROL PANEL
all performance demands. Intelligent control and design ensures maximum efficiencies are achieved with long intervals between cleaning
and maintenance.
WS18 / WP18
Output 4~18kW; Modulating
Black powder coated
Flue Options
conventional flue system
Conventional flue size (mm) 100
EN303-5 Efficiency class Class 5
Height (mm) 1135
Depth (mm) 1170
Width (mm) 650
Service access Front, Top & Sides
Circulating pump Factory-fitted UPM 25-75
37 38
WOOD PELLET FLUE SYSTEM & FLUE KIT ACCESSORIES
The ‘Easy-Fit’ twin wall metal flue system has been specifically Utilising a push-fit system ensures ease of use and quick
designed for use on biomass appliances. The inner wall is installation. The system is also suitable for internal use and can
manufactured from high grade aluminium with the outer wall be used in conjunction with our Roof Flashings kits as required.
finished in a weather-resistant and durable black powder coating.
Pitched Roof Flashing Flat Roof Flashing Vertical Flue Kit 080/100
4348 4349 4142
Included with every WP18 is:
• 500mm Extension
• Flue Terminal (584mm)
• Can be fitted in a garage, an outbuilding or outdoors. • Auto restart after power cuts – no manual intervention needed
45˚Bend Wall Brackets
so you won’t be waking up to cold water and a cold house after 4187 • Supporting Collar for pipes (4189 standard)
• 60 litre boiler capacity eliminates the need for a buffer tank in • Supporting Collar for pipes (4347 extended)
an overnight power cut while you were sleeping.
the majority of installations.
• User-friendly, menu-based controller guides you through every
• Only uses ENPlus A1 pellets.
step. Future-proofed to allow new software developments such
• High durable, black powder-coated, push-fit flue with options. as smart phone technology to be uploaded at routine services.
• Ceramic ignitor with intelligent software to give quick and • Installer friendly – simplified wiring.
reliable ignition. • Simple flow and return plumbing.
• Fits through a doorway and takes up similar footprint to a • Optional patent pending installation buggy kit, making it easy to
slimline oil tank, saving you valuable space. move into place.
• Smart induced draught fan technology with lambda control
continually adjusts to give you the best efficiency all the time.
• DEFRA exempt
Easy installation in a matter of hours • Approved by MCS Concentric Extension
• HETAS approved appliance scheme 4181 - 500mm
4188 - 1000mm
Eligible for government grants Exempt from the Clean Air Act
39 40
ø544
682mm
A
B
C
Nero
D
90º
The innovative design of our range of heat pump (A) Height 1205 1380 1655 1940
cylinders ensures that you benefit from the largest (B) Secondary return connection (mm) 905 1080 1355 1640
hot water volumes, shortest heat-up times and lowest (C) Plate Heat Exchanger upper connection (mm) 569 744 1019 1304
possible heat losses.
(D) Plate Heat Exchanger lower connection (mm) 397 572 847 1132
Available in four sizes from 170 to 290 litres to suit (E) Cold Inlet connection (mm) 228 228 228 228
the vast majority of heat pump installations. Thanks to
OPERATING DATA
their large surface area and high performance plate
heat exchanger, the heat pump models boast impressive Cold water capacity (litres) 165 194 233 281
heat-up times - the 170 litre model taking just 25 Weight when full (kg) 210 240 290 350
minutes to reach 60ºC from cold. V40 Hot water volume (litres) 229 259 312 401
Our Heat pump models, like the rest of the unvented Standing heat loss (kWh/24h) 1.68 1.78 2.08 2.15
range, are designed to be fed directly from the mains PERFORMANCE
water supply via the inlet group supplied, which is
Primary coil rating @ 15 l/min (kW) 17.08 25.85 29.38 21.92
capable of receiving incoming water at pressures up to
Heat up time by primary coil (mins) 25 21 22 34
a maximum of 16 bar.
ERP RATING C C C C
HEAT PUMP HP200UV
41 42
WARM AIR
HEATING SYSTEMS
Ideal for:
Garages
Warehouses
WARMFLOW CUSTOMER SERVICE Commercial &
Domestic Workshops
Total peace of mind with our dedicated Customer Service team
All Warmflow Agentis oil boilers come with a 2 year parts and Our dedicated and knowledgeable customer support team is on
labour warranty and a 5 year warranty on the heat exchanger hand to provide expert support before, during and after-sales,
as standard. These can easily be upgraded to a 5 year parts and to ensure that your queries are addressed in a timely fashion.
labour warranty*, providing peace of mind that your appliance is All Warmflow products must be registered in line with terms and
in safe hands should any problems occur. conditions otherwise warranty may be invalid. CAN BE INSTALLED
WITH A DUCTED SYSTEM
*Full details of terms and conditions of warranty for your Warmflow product are available at www.warmflow.co.uk.
For more information please visit www.warmflow.co.uk
contact sales@warmflow.co.uk or call 028 9262 1515
43
SIGN UP TO OUR
INSTALLER SCHEME.
IT’S AS EASY AS 1, 2, 3
Are you a Warmflow installer, carbon footprint. only some minor recommissioning. This ensures almost 90% cut in
carbon emissions immediately.
In addition we have continued to increase the efficiency of our current
Why not sign up to our Installer Scheme? Agentis oil (liquid fuel) range which includes the UK & Ireland’s only
AA rated combi boiler, saving up to 5ltrs of fuel per week.
Although it is currently classed and taxed as a road fuel the industry is
currently in discussions with Government to see how to best introduce
HVO as a home heating fuel and reduce the cost to homeowners.
The Warmflow Installer Scheme will allow you to register all of your Warmflow products, purchase Although heat pumps are not suitable for many existing properties
we have been working extensively with Government & industry
extended warranties and claim rewards for every purchase you make. Points mean rewards with agencies, test centres and colleges to pioneer a solution to replace For further information visit www.warmflow.co.uk or
Warmflow. Sign up online today at the Warmflow Connect platform connect.warmflow.co.uk existing oil and gas appliances. contact us on 02892 621515/ support@warmflow.co.uk
Email connect@warmflow.co.uk or contact your Warmflow sales representative.
45