Professional Documents
Culture Documents
Under Revision Draft
Bachelor Degree
Trimesters
1444H - 2022
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Index
١
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Program Description
The Production Engineering Technology (PET) Bachelor of Science program is offered by the
Mechanical Technology departments in the TVTC' affiliated Colleges of Technology. It is an applied
engineering technology program which is positioned to meet the growing national market's need for
qualified production engineering technologists. The program encompasses the junior and senior years of
the four-year training period required to receive the B.S. degree in PET. It succeeds another two-year
program leading to an associate degree in Production Technology.
The training curriculum for the PET program focuses on strengthening and extending the knowledge
and skills acquired in the associate degree program. It is carefully designed to provide its graduates with
solid knowledge and readily marketable skills which enable them to adapt to a wide variety of technical
careers and to assume managerial and leadership positions. Its core coursework comprises a range of
courses, including: Basics of Electricity and Electronics, Statics and Strength of Materials, Plastic
Technology, Engineering Materials, Control Technology, Operations Research, Production Planning and
Control, CIM, Non-conventional Machining, Industrial Maintenance, Lean Manufacturing, Facilities
Planning, Industrial Robotics an Automation, Tool Design, Machine Design, and a graduation project.
These courses are complemented with general courses necessary to enhance and broaden the trainee's
knowledge and proficiency in English, math, physics and management. The latter is given a considerable
weight in the PET program by incorporating five management related courses, including: Introduction to
Management and Leadership, Communication Skills, Engineering Project Management, Quality Tools and
Applications, and Engineering Economy. In addition to the mentioned subjects. Upon completion of the
PET program, trainees will have the ability to:
Identify, analyze, formulate and solve manufacturing related problems by using current knowledge
and adapting to emerging applications of mathematics, science, and engineering.
Apply the technologies of materials, manufacturing processes, tooling, automation, production
operations, maintenance, quality, industrial organization and management, and computer software
to the solutions of manufacturing problems.
Conduct, analyze and interpret experiments and apply experimental results to improve processes.
Perform effectively on multi-disciplinary teams by exercising leadership and contributing as a
member.
Communicate effectively in written and oral formats to a variety of audiences.
Engage in lifelong learning and professional development.
Understand professional and ethical responsibilities.
The Theoretical and Practical Tests and Graduation Projects Determine Learning Outcomes and Trainee
Levels for each program.
The training courses contain a theoretical part and a practical part. The practical part is tested as a practical
test and the theoretical part is a theoretical test with different evaluation methods
The Bachelor Degree Graduate gets the seventh level in the Saudi Arabian Qualifications Framework
(SAQF).
٢
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Brief Description
Course Course Credit
Engineering Materials MMEC 344 3
Name Code Hours
This course examines the interrelationships between processing, structure,
properties, and performance of various engineering materials such as metals,
polymers, ceramics, composites ،and semiconductors. The emphasis is upon
Description developing the ability both to select appropriate materials to meet engineering design
criteria and to understand the effects of heat, stress ،imperfections, and chemical
environments upon material properties and performance.
٣
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
٤
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
٥
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
٦
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
٧
KINGDOM OF SAUDI ARABIA
Technical and Vocational Training Corporation Production Engineering Technology
Directorate General for Curricula
Code
1st Trimester
CRH L P T CTH
1 ENGL 301 English Language (1) 4 4 0 2 6 ١ ﻟﻐﺔ اﻧﺠﻠ ﻳﺔ اﻧﺠﻞ٣٠١ ١
2 MATH 301 Mathematics (1) 4 3 2 1 6 ١ ر ﺎﺿﻴﺎت ر ﺎض٣٠١ ٢
3 PHYS 301 Physics 4 3 2 1 6 ﻓ ﻳﺎء ﻓ ي٣٠١ ٣
4 MMEC 323 Control Systems Technology 4 3 2 0 5 ﺗﻘﻨﻴﺔ أﻧﻈﻤﺔ اﻟﺘﺤﻜﻢ ﻣﻨﺘﺞ٣٢٣ ٤
Total Number of Units 16 13 6 4 23 ا ﻤﻮع
No. of Units
Course
No. Course Name Prereq
Code
CRH L P T CTH
2nd Trimester
1 ENGL302 English Language (2) ENGL 301 4 4 0 2 6 اﻧﺠﻞ٣٠١ ٢ ﻟﻐﺔ اﻧﺠﻠ ﻳﺔ اﻧﺠﻞ٣٠٢ ١
2 MATH 302 Mathematics (2) MATH 301 4 3 2 1 6 ر ﺎض٣٠١ ٢ ر ﺎﺿﻴﺎت ر ﺎض٣٠٢ ٢
3 GNRL 401 Introduction to Management and Leadership 3 3 0 1 4 ﻣﻘﺪﻣﺔ اﻹدارة و اﻟﻘﻴﺎدة ﻋﺎﻣﺔ٤٠١ ٣
4 MMEC 341 Statics and Strength of Materials 4 3 2 0 5 اﻻﺳﺘﺎﺗﻴ ﺎ وﻣﻘﺎوﻣﺔ اﳌﻮاد ﻣﻨﺘﺞ٣٤١ ٤
5 MMEC 344 Engineering Materials 4 2 4 0 6 اﳌﻮاد اﻟ ﻨﺪﺳﻴﺔ ﻣﻨﺘﺞ٣٤٤ ٥
Total Number of Units 19 15 8 4 27 ا ﻤﻮع
No. of Units
Course
No. Course Name Prereq
Code
CRH L P T CTH
3rd Trimester
No. of Units
Course
No. Course Name Prereq
Code
4th Trimester
CRH L P T CTH
1 GNRL 404 Quality Tools and Applications 3 3 0 1 4 أدوات ا ﻮدة و ﺗﻄﺒﻴﻘﺎ ﺎ ﻋﺎﻣﺔ٤٠٤ ١
2 MMEC 345 Plastic Technology 4 3 2 0 5 ﺗﻘﻨﻴﺔ اﻟﺒﻼﺳ ﻴﻚ ﻣﻨﺘﺞ٣٤٥ ٢
3 MMEC 374 Non- Conventional Machining Processes 4 3 2 1 6 ﻋﻤﻠﻴﺎت اﻟ ﺸﻐﻴﻞ ﻏ اﻟﺘﻘﻠﻴﺪﻳﺔ ﻣﻨﺘﺞ٣٧٤ ٣
4 MMEC 437 Computer Integrated Manufacturing 4 2 4 0 6 اﻟﺘﺼ ﻴﻊ اﳌﺘ ﺎﻣﻞ ﺑﺎ ﺎﺳﺐ ﻣﻨﺘﺞ٤٣٧ ٤
Total Number of Units 15 11 8 2 21 ا ﻤﻮع
No. of Units
Course
No. Course Name Prereq
Code
CRH L P T CTH
5th Trimester
CRH L P T CTH
6th Trimester
1 GNRL 403 Communication tools and soft skills 3 3 0 1 4 ﻣ ﺎرات اﻹﺗﺼﺎل ﻋﺎﻣﺔ٤٠٣ ١
2 MMEC 453 Industrial Maintenance STAT 303 4 2 4 0 6 ٣٠٣ اﺣﺼﺎ اﻟﺼﻴﺎﻧﺔ اﻟﺼﻨﺎﻋﻴﺔ ﻣﻨﺘﺞ٤٥٣ ٢
3 MMEC 471 Lean Manufacturing 4 2 4 0 6 اﻟﺘﺼ ﻴﻊ اﻟﺮﺷﻴﻖ ﻣﻨﺘﺞ٤٧١ ٣
4 MMEC *** Elective-2 4 3 2 0 5 ٢-اﺧﺘﻴﺎري *** ﻣﻨﺘﺞ ٤
5 MMEC 493 Graduation Project-2 MMEC 492 2 0 4 0 4 ٤٩٢ ﻣﻨﺘﺞ ٢ ﻣﺸﺮوع اﻟﺘﺨﺮج ﻣﻨﺘﺞ٤٩٣ ٥
Total Number of Units 17 10 14 1 25 ا ﻤﻮع
CRH: Credit Hours L: Lecture P: Practical T: Tutorial CTH: Contact Hours ﺳﺎﻋﺎت اﺗﺼﺎل أﺳﺒﻮ: أ.س ، ﺗﻤﺎر ﻦ: ﺗﻢ ، ورش/ ﻋﻤ: ﻋﻢ ، ﻣﺤﺎﺿﺮة: ﻣﺢ، وﺣﺪات ﻣﻌﺘﻤﺪة: م.و
١
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
CRH L P T CTH
Total Number of Semesters Units
99 75 48 17 140
Total Contact Hours × 13 Co-operative Training اﻟﺘﺪر ﺐ اﻟﺘﻌﺎو ﻲ ١٣ × ﺳﺎﻋﺎت اﻹﺗﺼﺎل اﻟ ﻠﻴﺔ
Elective Courses
No. of Units
Course
Elective Courses -1
١
No.
Code CRH L P T CTH
MATH 301 ر ﺎض٣٠١
1 MMEC 441 Theory of Machines 4 3 2 0 5 ﻧﻈﺮ ﺔ اﳌﺎﻛﻴﻨﺎت ﻣﻨﺘﺞ٤٤١ ١
MMEC 341 ﻣﻨﺘﺞ٣٤١
2 MMEC 442 Machine Design MATH 301 4 3 2 0 5 ر ﺎض٣٠١ ﺗﺼﻤﻴﻢ اﳌﺎﻛﻴﻨﺎت ﻣﻨﺘﺞ٤٤٢ ٢
CRH: Credit Hours L: Lecture P: Practical T: Tutorial CTH: Contact Hours ﺳﺎﻋﺎت اﺗﺼﺎل أﺳﺒﻮ: أ. س، ﺗﻤﺎر ﻦ: ﺗﻢ ، ورش/ ﻋﻤ: ﻋﻢ، ﻣﺤﺎﺿﺮة: ﻣﺢ، وﺣﺪات ﻣﻌﺘﻤﺪة: م.و
No. of Units
Course
Elective Courses -2
٢
No.
Code CRH L P T CTH
MATH 301 ر ﺎض٣٠١
1 MMEC 451 Metal Forming Theory 4 3 2 0 5 ﻧﻈﺮ ﺔ ﺸﻜﻴﻞ اﳌﻌﺎدن ﻣﻨﺘﺞ٤٥١ ١
MMEC 341 ﻣﻨﺘﺞ٣٤١
2 MMEC 472 Industrial Robotics an Automation MATH 301 4 3 2 0 5 ر ﺎض٣٠١ اﻟﺮو ﻮﺗﺎت اﻟﺼﻨﺎﻋﻴﺔ واﻻﺗﻤﺘﺔ ﻣﻨﺘﺞ٤٧٢ ٢
CRH: Credit Hours L: Lecture P: Practical T: Tutorial CTH: Contact Hours ﺳﺎﻋﺎت اﺗﺼﺎل أﺳﺒﻮ: أ. س، ﺗﻤﺎر ﻦ: ﺗﻢ ، ورش/ ﻋﻤ: ﻋﻢ، ﻣﺤﺎﺿﺮة: ﻣﺢ، وﺣﺪات ﻣﻌﺘﻤﺪة: م.و
٢
KINGDOM OF SAUDI ARABIA
Technical and Vocational Training Corporation Production Engineering Technology
Directorate General for Curricula
Courses description
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
١
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
٢
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Course description :
This course covers the basic architecture, main components of programmable logic controller and its
programming methods as well as appropriate applications. The student will be able to write programs
and construct hydraulic/ pneumatic systems controlled by programmable controller.
Topics :
Introduction to automation
Programmable logic controllers PLC and its components
Input/output
sensors
Number systems
PLC Programming languages and logic gate
Boolean Algebra
Jump and Call
Set-Reset
Timers
Counters
Comparisons
Experiments: if applicable it will support the course topics.
References :
Integration and Automation of Manufacturing Systems, by Hugh Jack
Programmable Controllers, Theory and Implementation, Second Edition, L.A. Bryan, E.A.
Bryan
Programmable Logic Controllers, Fifth Edition, W. Bolton
Automating Manufacturing Systems with PLCs (Version 5.1, March 21, 2008), Hugh Jack
٣
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
11 Counters 3
Down- counters
Up- counters
Up-Down counters
٤
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
12 Comparisons 2
Total 39
Textbook: Programmable Logic Controllers, 4th edition, Frank D. Petruzella
Detailed of Practical Contents
No. Contents Hours
1 1st Experiment: PLC description 1
5
2 2nd Experiment: working on Step 7 Program
٥
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
٦
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
٧
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
٨
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
١٠
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Topics:
Introduction
Abrasive Jet Machining (AJM)
Water Jet Mchining (WJM)
Abrasive Water Jet Machining (AWJM)
Electric Discharge Machining (EDM)
Wire Electric Discharge Machining (WEDM)
Ultrasonic Machining (USM)
Rotary Ultrasonic Machining (RUM)
Laser Beam Machining
Plasma Arc Machining
Elecrtochemical Machining
3D Printer Process
Experiments: if applicable it will support the course topics.
References:
Modern Machining Processes by P.C.Pandey, Tata McGraw Hill, NewDelhi.
Unconventional Machining Processes by P.K.MishraAdvanced Machining Methods by
JAMcGeough, Chapman and Halls, UK.
١١
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
MRR estimation
Applications
Advantages and disadvantages
١٢
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
١٣
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Course description:
This course introduces the trainee to the basic essential of manufacturing systems, concepts
and associated mathematical models, production economics, numerical control, flexible
manufacturing systems, computer process control, CAD/CAM and computer aided process
planning. It explain technology about industrial robotics, automated assembly, automated material
handling and storage, automated inspection, shop floor control, computer networks for
manufacturing and manufacturing productivity.
Topics:
Introduction to Computer Integrated Manufacturing.
Essential of Manufacturing Systems
Automation:
Design for manufacture :
Production Process Systems:
Production Planning :
Shop Floor Control :
Robotics (Automated Material Handling and storage systems )
Quality Control and Automated Inspection:
Computer Network for Manufacturing:
Manufacturing Productivity and Implementation
Experiments: if applicable it will support the course topics.
References:
Mikell P. Groover, 2008. Automation, Production Systems, and Computer-integrated
Manufacturing, Prentice Hall, United State of America.
S.K.Vajpayee, 1995. Principles of Computer-Integrated Manufacturing, Prentice Hall, United
States of America.
T.C.Chang et al, 1998. Computer-Aided Manufacturing second edition, Prentice Hall, , United
States of America.
١٤
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
١٥
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
١٦
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
١٧
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
١٨
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
2 Preventive Maintenance 10
Preventive Maintenance elements plant characteristic in need of a PM
Important steps for Establishing a PM Program
PM Measures
Mean Preventive Maintenance time (MPMT)
Median preventive Maintenance time (MDPMT)
Maximum Preventive Maintenance Time (MXPMT)
PM Advantage and disadvantages
3 Corrective Maintenance 9
Corrective Maintenance Types
Corrective Maintenance steps, Downtime Components and time
Reduction Strategies at system level
Corrective Maintenance Measures
4 Quality and safety in maintained 5
Need for quality maintenance process
Maintenance work quality
Quality control chart for use in maintenance
c-charts
Post maint5anance testing
PMYT Key Elements
5 Reliability Centered Maintenance 10
RCM Goals and principles
RCM Process and Associated question
RCM Components Reactive Maintenance
Preventive Maintenance
Predictive Testing and Inspection
Proactive Maintenance
Predictive Testing and inspection Technologies
RCM Program Effectiveness Measurement Indicators
Equipment Availability
Emergency Percentage Index
6 maintenance costing Introduction for maintenance Costing and factors 10
influencing
Maintenance cost
Maintenance Budget types preparation approaches and steps
Budget preparation approaches
Maintenance budget predation steps
Maintenance labor cost estimation
7 Reliability 6
Rate concept
Reliability Measures
Reliability Function
Hazard rate
Mean Time to Failure (MTTF)
8 Software maintenance 14
Software Maintenance facts and figure
Software maintenance importance effort distribution and request types
Types of software maintenance
Software maintenance tools and techniques
١٩
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
٢٠
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Course description:
This course introduces basic knowledge specific to tool design comprising structure and
properties of metals, tool drafting, geometric control, tool measurements. Fundamentals
of tool design are also covered including design of components and hinges, jigs and
fixtures, clamps, single-point tools, multiple-point tools, piercing and blanking dies,
bending and forming dies, drawing and progressive dies.
Topics:
Introduction: Structure and properties of metals, tool drafting, geometric control, tool
measurements
Design of components and hinges
Design of jigs and fixtures
Design of clamps
Design of single-point tools
Design of multiple-point tools
Design of piercing and blanking dies
Design of bending and forming dies
Design of drawing and progressive dies
References:
٢١
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Bushes
3 Design of jigs and fixtures 10
Definition of axioms
Lathe fixtures
Milling fixtures
Grinding fixtures
Drill Jigs
4 Design of clamps 6
Clamping principles
Types of clamps
Cam clamps
Toggle clamps
Wedges and latches
Strap clamp calculations
5 Design of single-point tools 10
Single-point cutting tool nomenclature
Selection of cutting tool angles
Chip formation and breakers
Cutting forces
Tool failure and life
Carbide tools
Boring tools
6 Design of multiple-point tools 10
Multiple tool bits
Multiple-point cutting tool nomenclature
Milling cutters and required power
Drill bits and required power
Reamers
Countersinking, spotfacing, counterboring
Boring and tapping
7 Design of piercing and blanking dies 10
Presses and die sets
Punch and die clearance
Scrap strip layouts
Punches and die blocks
Pilots
Knockouts and shedders
Stripper plates
Die stops
Die design
8 Design of bending and forming dies 8
Theory of metal flow
Developed length
٢٢
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Bending forces
Types of bends
Forming dies
9 Design of drawing and progressive dies 10
Theory of metal drawing
Shell-Blank calculations
Drawing radii and clearance
Drawing forces
Types of drawing dies
Shell defects
Progressive dies
Total 78
٢٣
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Course description:
This course is an introduction to automation equipment including industrial robots. The
topics covered include fundamentals of process control, industrial sensor, actuators, transfer
devices and feeders, plant floor communication, industrial robots, robotic sensing and
programing. Installation, maintenance, and troubleshooting of industrial automation systems
are briefly introduced.
Topics:
Introduction to industrial automation
Fundamentals of process control
Industrial sensor
Actuators
Transfer devices and feeders
Plant floor communication
Industrial robots
Robotic sensing and programing
Installation, maintenance, and troubleshooting
References:
Industrial automation and process control by Jon Stenerson, Pearson Hall,
ISBN-10: 0130330302
٢٤
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
4 Actuators 12
Mechanical actuators
Electrical actuators
Electromechanical actuators
Motors
Cylinders
Fluid power actuation
Pneumatics vs. Hydraulics
Fluid power actuator types
Valve actuators
٢٥
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Industrial automation and process control by Jon Stenerson, Pearson Hall, ISBN-
10: 0130330302
Textbooks:
Industrial Automation and Robotics by A .K. Gupta and S .K. Arora, University
Science Press, ISBN-10: 1938549309
٢٦
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Topics :
Introduction
Plastic deformation and microstructure of metals.
Analysis of stress
Theories of plastic deformation.
Applications.
Experiments: if applicable it will support the course topics.
References :
Detailed of Theoretical Contents
No. Contents Hours
1 Introduction: 4
The concept of metal forming
The importance of metal forming
The metal forming processes.
2 Stress and Strain: 8
Stress
Stress transformation
Principal stresses
Mohr’s circle equations
Strain
Small strains
The strain tensor
Isotropic elasticity
Strain energy
Force and moment balances
Boundary conditions
3 Plasticity: 10
Yield criteria
Tresca criterion
Von Mises criterion
Plastic work
Effective stress
Effective strain
Flow rules
Normality principle
Derivation of the von Mises effective strain
٢٧
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
4 Strain Hardening: 10
The tension test
Elastic–plastic transition
Engineering vs. true stress and strain
A power-law expression
Other strain hardening approximations
Behavior during necking
Compression testing
Bulge testing
Plane-strain compression
Torsion testing
5 Instability: 8
Uniaxial tension
Effect of inhomogeneities
Balanced biaxial tension
Pressurized thin-wall sphere
Significance of instability
6 Work Balance: 8
Ideal work
Extrusion and drawing
Deformation efficiency
Maximum drawing reduction
Effects of die angle and reduction
Swaging
7 Slab Analysis and Friction: 9
Sheet drawing
Wire and rod drawing
Friction in plane-strain compression
Sticking friction
Mixed sticking–sliding conditions
Constant shear stress interface
Axially symmetric compression
Flat rolling
8 Upper-Bound Analysis: 8
Upper bounds
Energy dissipation on plane of shear
Plane-strain frictionless extrusion
Plane-strain frictionless indentation
Plane-strain compression
Plane-strain drawing
Axisymmetric drawing
Total 65
Hosford, W. F., & Caddell, R. M. (1983). Metal forming: Mechanics and metallurgy.
Textbook
Englewood Cliffs, N.J: Prentice-Hall.
٢٨
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Topics :
Introduction
Properties of motion
Mechanism diagrams.
Transmission of forces.
Flywheels.
Free vibrations.
Experiments: if applicable it will support the course topics.
٢٩
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Course description :
The course aims to provide fundamentals of machine design including design considerations such as
loads, stresses, strain, deflection, torsion, fatigue as well as materials and their properties. Also the course
covers fundamental mechanical design topics, such as static and fatigue failure theories, the
analysis and design of gears, bearings, belts, pulleys, chain drives welded connections, levers, nuts,
screws, bolts, rivets joints, shafts, keys and couplings are included. Failure analysis, static and
dynamic loads are studied.
Topics :
Introduction to Mechanical Design
Design considerations
Fatigue Failure
Deflection and Stiffness
Metal fits
Design of shafts
Design of keys
Design of gears
Design of bearings
Design of belts and pulleys
Design of cylinders
٣٠
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Design considerations
stress,
strain,
2
loads, 8
shear,
moment torsion,
Factor of safety
Fatigue Failure
4 Deflection Analysis, 8
Compression,
Elastic Stability
Metal fits
Tolerances,
5 8
Standards of fits & tolerances,
Surface finish
Design of shafts
6 4
Design of keys
7 4
Design of gears
Types of Gears,
Gear Trains,
8 Force Analysis, 8
Spur and Helical Gears,
Bevel and Worm Gears,
Selection of Gears
Design of bearings
9 4
٣١
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
10 Design of belts 4
Design of pulleys
Design of cylinders
11 4
Total 65
Mechanical Engineering Design (SI version) by J.E. Shigley, C.R. Mischke and R. G.
Textbook: Budynas, 9th ed
٣٢
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Course description :
The course aims to provide electrical and electronic components: current, voltage, resistors, capacitors,
inductors, diodes and transistors, analysis techniques include Ohm’s Law and Kirchhoff's law, series-
parallel circuits, meters, magnetic circuits, relays, and basic transistor circuits. Fundamentals of DC and
AC circuits and their power concepts are studied.
Topics :
Fundamentals of electric circuits
DC circuits
AC Circuits
Electric fields and Capacitors
Magnetic fields and circuits
Inductors
DC. Machines
AC power
Transformers
Operational amplifier
Semiconductors and diode
Transistors
Experiments: if applicable it will support the course topics.
References :
Christopher R. Robertson, "fundamental Electrical and Electronic Principles", 3rd edition,
Elsevier Ltd
Giorgio Rizzoni,"Fundamental of Electrical Engineering",1st edition, the McGraw-Hill
Detailed of Theoretical Contents
Contents Hours
1 Fundamentals of electric circuits: 4
Definitions
charge
current
units
Kirchhoff's law
resistance and ohm' law
٣٣
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
2 DC circuits 3
3 AC Circuits 3
series circuits
Parallel circuits
4 Electric fields and Capacitors 4
Coulomb's law
electric field
flux
capacitor-resistors series
capacitance and capacitors
Capacitors connected in parallel and series
Energy stored in capacitors
Practical types of capacitors
energy stored
5 Magnetic fields and circuits 4
faraday's law
types of inductors
inductors series and parallel
inductors-resistors series
7 DC. Machines 3
8 AC power 3
inductive circuits
capacitive circuits
effective resistance
9 Transformers 3
types of transformers
mutual inductance
the iron core transformer
10 Operational amplifier 3
٣٤
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
ideal amplifier
operational amplifier
11 Semiconductors and diode 3
Operation
field- effect transistors
classifications of field- effect transistors
Total 39
rd
Christopher R. Robertson, "fundamental Electrical and Electronic Principles", 3
Textbook: edition, Elsevier Ltd
To analyze a two Mesh circuit and to determine the current in each branch of
7 the circuit. 2
To study the steady state response of series R-L circuit with AC supply and to
9 find impedance, power and power factor of the circuit. 2
To study the steady state response of series R-C circuit with AC supply and to
10 find impedance, power and power factor of the circuit. 2
To study the steady state response of series RLC circuit with AC supply and to
11 find impedance, power and power factor of the circuit. 2
٣٥
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Total 26
Textbook:
٣٦
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Topics :
Forces and forces systems
Free body diagrams
Moments
Trusses
Friction
Properties of materials
Centroids and moments of inertia
Stress and strain
Beams: bending, shear, deflection
Shafts: torsion
Combined stresses
Columns
Detailed of Theoretical Contents
No. Contents Hours
1 Forces and Free Body Diagrams: 6
Basic Unit Systems
Relationship Among Mass, Force, and Weight
The Concept of Stress
Direct Normal Stress
Stress Elements for Direct Normal Stresses
The Concept of Strain Direct Shear Stress
Stress Element for Shear Stresses
Free-Body Diagram
2 Static Equilibrium: 4
Equilibrium of a Particle
Newton’s First Law of Motion
Equilibrium of a Particle in Space
Equilibrium in Two Dimensions
Reactions at Supports and Connections for a
Two-Dimensional Structure
Equilibrium of a Rigid Body in Two Dimension
Statically Indeterminate Reactions. Partial Constraints
Equilibrium of a Two-Force Bod
Equilibrium of a Three-Force Body
Equilibrium in Three Dimension
Reactions at Supports and Connections
for a Three-Dimensional Structure
٣٧
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
5 Torsion: 6
٣٨
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
8 Bending Stresses: 5
9 Shearing Stresses: 4
10 Deflection of Beams: 8
٣٩
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Moment-Area Method
11 Columns: 8
Slenderness Ratio
Transition Slenderness Ratio
The Euler Formula for Long Columns
The J. B. Johnson Formula for Short Columns
Summary – Buckling Formulas
Design Factors and Allowable Load
Total 65
Mott, R.L. Untener, J. A., (2016). Applied Strength of Materials, Sixth edition, CRC
Textbook
Press.
٤٠
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Course description:
Introduces the philosophy and fundamental concepts of lean manufacturing and describes the
background behind its development and how evaluations and assessments of manufacturing systems are
performed. Covers lean tools and techniques including 5S, JIT/kanban systems, kaizen, value stream
mapping, work standardization, setup reduction, level scheduling, root cause analysis, continuous flow,
overall equipment effectiveness (OEE), takt time, error proofing, and total productive maintenance
(TPM). Also covers cultural aspects of lean manufacturing including employee involvement and
leadership mindsets and behaviors that support building a sustainable lean culture.
Topics:
INTRODUCTION TO LEAN MANUFACTURING
Cellular Manufacturing
Kaisen
JIT
value stream mapping
TPM
Set up time reduction
TQM
5S
work standardization,
level scheduling,
root cause analysis,
continuous flow,
takt time,
Overall Equipment Effectiveness
Six Sigma
٤١
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
2 Cellular Manufacturing 10
- Types of Layout,
- Principles of Cell layout,
- Implementation.
3 Kaisen 4
- History
- Principle and Types of approaches
- Implementation
4 JIT 5
- Principles of JIT
- Implementation of Kanban.
6 TPM 4
- Pillars of TPM,
- Principles and implementation of TPM.
8 TQM 5
- Principles
- implementation
- Six Sigma implementation
9 5S 5
- Principles and implementation
- Value stream mapping
- Procedure and principles.
10 work standardization, 10
level scheduling,
root cause analysis,
٤٢
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
continuous flow,
takt time,
12 Six Sigma 10
- Definition,
- statistical considerations,
- variability reduction,
- design of experiments
Total 78
th
Textbook: Programmable Logic Controllers, 4 edition, Frank D. Petruzella
٤٣
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Topics :
Introduction
Project proposal
Report description
Project management
Experiments: product manufacturing or assembling in labs or workshops
٤٤
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
Topics :
Project Management.
Final product
Project report.
Experiments: product manufacturing or assembling in labs or workshops
٤٥
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
٤٦
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
٤٧
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
٤٨
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
7. Ultrasonic Welders 1
٤٩
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
٥٠
KINGDOM OF SAUDI ARABIA Production Engineering Technology
Technical and Vocational Training Corporation
Directorate General for Curricula
References
٥١