You are on page 1of 2

Board of Secondary Education Rajasthan, Ajmer

Model Paper SR. SEC. Exam 2024 (01.11.2023)


RGPS Jagatpura, Jaipur(Rajasthan)
Time: 3 Hrs 15 Min Max. Marks: 56
GENERAL INSTRUCTION TO THE EXAMINEES:
1. All the questions are compulsory.
2. Write the answer to each question in the given answer book only.
3. For questions having more than one part the answers to those parts are to be
written together in continuity.
4. Marks of each question is written with the question
Section-(𝐀)
Que1. Choose the correct answer from multiple choice questions (i to ix) and write in given
answer book. Each question carries one mark.
(i) Magnetic field inside a long solenoid having N turns is given as
(a) µ0nI (b) µ0NI (c) µ0I/n (d) None of these
(ii) Magnetic dipole of a current carrying circular loop having number of turns N and
current I be given as
(a) NIA (b) nIA (c) IA (d) None of these
(iii)Current sensitivity of moving coil galvanometer is defined as
(a) Deflection per unit current (b) Current per unit deflection
(c) Product of deflection and current (d) None of these
(iv) Radius of a charge particle moving perpendicular to uniform magnetic field B
with velocity v and charge q
(a) mv/qB (b)2πm/qB (c) qB/2πm (d) None of these
(v) Time period of a charge particle moving perpendicular to uniform magnetic field
B with velocity v and charge q is independent of
(a) Speed (b) Mass (c) Charge (d) Magnetic Field
(vi) The electric potential due to a point charge Q at a distance r is
(a) kQ/r (b) kQ/r2 (c) kQ2/r2 (d) None of these
(vii) In a parallel-plate capacitor, how can the capacitance be decreased?
(a) Decreasing the stored charge in the capacitor
(b) Increasing the stored charge in the capacitor
(c) Decreasing the gap between the charged plates
(d) Increasing the gap between the charged plates
(viii) Which one of the following is best material for making connecting wires?
(a) Maganin (b) Constantan (c) Copper (d) Nichrome.
(ix) Constantan and maganin are used to make standard resistances because:
(a) Their resistances are high
(b) Their resistances are low
(c) Their temperature coefficient of resistance is high
(d) Their temperature coefficient of resistance is low.
Que2. Fill in the blanks (i to iv). Each question carries one mark.
(i) Vector form of ohm’s law is written as…………………
(ii) Kirchhoffs second law is also called ............................ rule.
(iii)Kirchhoffs first law is based on the law of conservation of ............................
(iv) Kirchhoffs second law is based on the law of conservation of ............................
Que3. Give the answer of the following question (i to viii) in one line. Each question carries
one mark.
(i) Define Lorentz force.
(ii) Define magnetic field.
(iii)Define ampere’s circuital law.
(iv) Draw equipotential surfaces for a positive point charge.
(v) Write the relation between electric field and electric potential.
(vi) Define drift velocity.
(vii) Write the expression of energy stored in a capacitor.
(viii) Write the formula of effective capacitance of series and parallel combination
of two capacitors of capacitance C1 and C2.
Section – (𝐁)
Que4. State Biot-savart’s law. 1.5
Que5. Why a galvanometer can’t be used as current measuring device in a circuit? 1.5
Que6. What is shunt resistance? How can a galvanometer have converted into an ammeter?
1.5
Que7. What do you mean by electrostatic shielding? 1.5
Que8. State ohm’s law. 1.5
Que9. Write limitations of ohm’s law. 1.5
Que10. State Kirchhoff’s laws. 1.5
Que11. What do you mean by balanced wheat stone’s bridge? 1.5
Que12. Define resistivity of a material. How it varies with temperature? 1.5
Que13. Define dielectrics. Explain the effect of dielectrics on capacitance of parallel plate
capacitor. 1.5
Que14. A silver wire has resistance of 2.1Ω at 27.5 0C and a resistance of 2.7Ω at 100 0C.
Determine the temperature coefficient of resistivity of silver. 1.5
Que15. A slab of a material of dielectric constant K has the same area as the plates of a
parallel plate capacitor, but has a thickness (3/4)d, where d is the separation between the
plates. How is the capacitance changed when the slab is inserted between the plates?
1.5
Section – (C)
Que16. Find the magnetic field due to a thick wire of radius R carrying current I at a distance
r from its axis.
3
Que17. Derive an expression of series and parallel combination to two resistors R1 and R2. 3
Que18. Calculate electric potential due to an electric dipole. 3
Section – (D)
Que19. Explain construction and working of moving coil galvanometer. 4
Que20. Derive an expression of series and parallel combinations of two cells having emf E 1
and E2 and internal resistances r1 and r2 respectively. 4

You might also like