pe
=A
Agi anu
fw Scns egMedical Endoscopy CCD Camera & Standard Monitor & LED
Light Source & HD Recorder
‘Sinuscope 4*2.7°175mm , 0° degree hg
1570mm»600mm countertops
made of environmentfriendly
exystal marble, The countertop
is bright as ——
mirrors, smooth, abrasion-
resistant, corrosionresistant,
non-permeable, non-sticky,
and highly rigid
after tempering.
‘The countertop has high
strength high heat
resistance and
good impact resistance.
N
Power: 100W Stable
Power: 250W Stable
Noise & vibration insutator
Built-in
‘Spray gun
Spray volume 20mV/min
Positive pressure > 0.IMpa adjustable, good
atomization, no drip.
Suction gun
> 600mmblg, there is a finger hole to adjust the
suction. The function of delayed disconnect makes
extremely low blocking probability. Safe and
environmentally friendly, easy to clean,
Blowing gun 0.01~0.1SMpa
proheater 450W
automatie/manual; time adjustable Between 1-995,
Spotlight
24V SOW, no radiation, brightness adjustable. The thre joint direction cantilever
{used to rotate the cantilever in all diections to accurately postion,
Microcomputer contro sy
controls the power supply and various
funetions ofthe treatment, I ean also
control the lift and supine ofthe patient chat. J
‘With automatic protetion function when the
‘equipment i not operated for a long time,
ill eu off the power automaticaly
Sewage system —
250ml Automatically collect and sal =
discharge effluentand prevent backflow
Instrument tray
Stainless steel, with cover, autoclavable So amy
Ointment jar
(090, 080 stainless steel, for cotton and gauze
Built in waste tank Bil
‘Contaminated instrument tray Builtin
X-ray film viewer
Doctor stool
Features:
I. Fashion appearance
2. High quality leather
‘Technical Parameters:
Hydraulic pressure support;
Surface height: 470-600mm;
Rotation angle: 360°;
Max. load: 100kg.
‘Automatic Patient chair
Features:
1. Complete electronic control
2 Fashion appearance
3. High quality leather Technical Parameters:
Size: L790 » W730 > H13600mm: Chaie surface height: 860 - 760mm;
‘Backrest tilt angle: 90" 180"; Rotation angle: 360°;
Headeest extension: 0 -200enm: Max, load: 135kg;Landing speed: 1mm,
Povwer supply: 200-240Viac /50- 60H2.