Professional Documents
Culture Documents
Siemens Level Sensor Sitransl Probe Lu Fi01 en
Siemens Level Sensor Sitransl Probe Lu Fi01 en
Level Measurement
Continuous level measurement
Ultrasonic transmitters
SITRANS Probe LU
■ Overview ■ Configuration
Parabolic mounting
4
SITRANS Probe LU is a 2-wire loop powered ultrasonic transmit-
ter for level, volume and flow monitoring of liquids in open
channels, storage vessels, and simple process vessels.
Flat mounting and beam angle
■ Benefits Fill
■ Application Seams
The SITRANS Probe LU is ideal for level monitoring in the water
10°
and wastewater industry, chemical storage vessels, and small
bulk hoppers. Beam angle
Level Measurement
Continuous level measurement
Ultrasonic transmitters
SITRANS Probe LU
■ Technical specifications
Mode of operation Process connection
Measuring principle Ultrasonic level measurement Threaded connection 2" NPT [(Taper), ASME B1.20.1]
Typical application Level measurement in storage R 2" [(BSPT), EN 10226]
vessels and simple process vessels or
Inputs G 2" [(BSPP), EN ISO 228-1]
Measuring range Flange connection 3 inch (80 mm) universal flange
• 6 m (20 ft) model 0.25 ... 6 m (10 inch ... 20 ft) Other connection FMS 200 mounting bracket (see page
• 12 m (40 ft) model 0.25 ... 12 m (10 inch ... 40 ft) 5/189) or customer supplied mount
Frequency 54 kHz Display and Controls
Outputs Interface Local: LCD display with bar graph
mA/HART Remote: Available via HART or
• Range 4 ... 20 mA PROFIBUS PA
• Accuracy ± 0.02 mA Configuration Using Siemens SIMATIC PDM (PC) or
HART handheld communicator or
4
PROFIBUS PA Profile 3, Class B
Siemens infrared handheld
Performance programmer
Resolution 3 mm (0.12 inch) Memory Non-volatile EEPROM
Accuracy ± the greater of 0.15 % of range or Power supply
6 mm (0.24 inch)
4 ... 20 mA/HART Nominal 24 V DC with 550 maxi-
Repeatability 3 mm (0.12 inch) mum; maximum 30 V DC 4 ... 20 mA
Blanking distance 0.25 m (10 inch) PROFIBUS PA 12, 13, 15, or 20 mA depending on
programming (General Purpose or
Update time 5s Intrinsically Safe version)
• 4/20 mA/HART version 5 s at 4 mA
per IEC 61158-2
• PROFIBUS version 4 s at 15 mA current loop
Certificates and Approvals
Temperature compensation Built-in to compensate over
temperature range General CCSAUS, FM, CE, UKCA, RCM
Beam angle 10° Marine (only applies to HART • Lloyd’s Register of Shipping
communication option) • ABS Type Approval
Rated operating conditions
Hazardous
Ambient conditions
• Intrinsically Safe (Europe) ATEX II 1G Ex ia IIC T4 Ga
• Location Indoor/outdoor
• Intrinsically Safe (UK) UKEX II 1G Ex ia IIC T4 Ga
• Ambient temperature -40 ... +80 °C (-40 ... +176 °F)
• Intrinsically Safe (USA/Canada) CSA/FM, Class I, Div. 1, Groups A, B,
• Storage temperature -40 ... +80 °C (-40 ... +176 °F) C, D; Class II, Div. 1, Groups E, F, G;
• Relative humidity/ingress protection Suitable for outdoor Class III T4
• Installation category I • Intrinsically Safe (International) SIR 13.0008X Ex ia IIC T4 Ga
• Pollution degree 4 • Intrinsically Safe (Brazil) INMETRO Ex ia IIC T4 Ga
Medium conditions • Non-incendive (USA) FM Class I, Div. 2, Groups A, B, C, D
• Temperature at flange or threads -40 ... +85 °C (-40 ... +185 °F) T4
• Pressure (vessel) 0.5 bar g (7.25 psi g) Handheld Programmer
Design Intrinsically Safe Siemens handheld Infrared receiver
programmer
Material (enclosure) PBT (Polybutylene Terephthalate)
• Approvals for handheld programmer IS model:
Degree of protection Type 4X/NEMA 4X, Type 6/NEMA ATEX II 1 GD Ex ia op is IIC T4 Ga,
6/IP67/IP68 enclosure ATEX II 1 GD Ex ia op is IIIC T135°C
Weight 2.1 kg (4.6 lb) Da,
Ta = -20 ... +50°C;
Cable inlet 2 x M20 x 1.5 cable gland or UKEX II 1 GD Ex ia op is IIC T4 Ga,
2 x ½" NPT thread or 1 x M20 x 1.5 UKEX II 1 GD Ex ia op is IIIC T135°C
and 1 x ½" NPT Da,
Ta = -20 ... +50°C;
Material (transducer) Buna-N seal with ETFE
CSA/FM Class I, II, III, Div. 1, Groups
(Ethylene Tetrafluoroethylene) or
A, B, C, D, E, G, T6,
PVDF (Polyvinylidene Fluoride)
Ta = 50°C;
IECEx SIR 09.0073
Ambient temperature -20 ... 50 °C (-5 ... 122 °F)
Interface Proprietary infrared pulse signal
Power 3 V lithium battery (non-replaceable)
Level Measurement
Continuous level measurement
Ultrasonic transmitters
SITRANS Probe LU
Level Measurement
Continuous level measurement
Ultrasonic transmitters
SITRANS Probe LU
■ Options
Flange adapter for mating 2" NPT or 2" BSP process connections to SITRANS Probe LU with FMS 200 universal box bracket
3" ASME, DN 65 PN 10 and JIS 10K 3B flanges
148.8 (5.86)
Bolt hole circle
diameter
7ML1830-1BK
190.2 (7.49)
Diameter
SITRANS Probe LU optional flange adapter, dimensions in mm (inch) SITRANS Probe LU with optional mounting bracket
■ Dimensional drawings
4
139.7 (5.50)
Hinged lid
130.1 (5.12)
198.9 (7.83)
Electronics
Mounting thread
21
(0.83)
Transducer
51.1
(2.01)
54 (2.13)
Note: Above model is shown without M20 cable glands or 1/2" NPT conduit connectors.
Level Measurement
Continuous level measurement
Ultrasonic transmitters
SITRANS Probe LU
■ Circuit diagrams
Connect the wires to the
terminals as shown:
the polarity is identified
on the terminal block
Lid screws Terminals for loop current
or PROFIBUS PA cable
Cable
Watertight
gland
Note:
- HART model above is shown with M20 cable glands. 1/2" NPT threaded connection is also available.
- DC terminal shall be supplied from an SELV source in accordance with IEC-1010-1 Annex H.
- All field wiring must have insulation suitable for rated input voltages.
- Separate cables and conduit may be required to conform to standard instrumentation wiring practices or electrical codes.