This document is a quality control report for pieces TK2701A and TK2702B. It summarizes the dimensions and angles measured for 6 vertical pieces (V1-V6) and 2 passerelle pieces (PL-1, PL-2) and finds them to be acceptable. The angles of the chamfers were all measured correctly at 60 degrees or 45 degrees. The manufacturer, 3rd party inspector, and customer all approved the results.
This document is a quality control report for pieces TK2701A and TK2702B. It summarizes the dimensions and angles measured for 6 vertical pieces (V1-V6) and 2 passerelle pieces (PL-1, PL-2) and finds them to be acceptable. The angles of the chamfers were all measured correctly at 60 degrees or 45 degrees. The manufacturer, 3rd party inspector, and customer all approved the results.
This document is a quality control report for pieces TK2701A and TK2702B. It summarizes the dimensions and angles measured for 6 vertical pieces (V1-V6) and 2 passerelle pieces (PL-1, PL-2) and finds them to be acceptable. The angles of the chamfers were all measured correctly at 60 degrees or 45 degrees. The manufacturer, 3rd party inspector, and customer all approved the results.