You are on page 1of 2

SAFE MODEL - CHECKLIST

PROJECT SINO GULF


FLOOR

REVISION-R0
S.NO DESCRIPTION
SERVICE MODEL CHECKLIST TEMP CHECKLIST

1 Modulus of Elasticity - E value 1 Ec-As per grade 1 Ec-As per grade

2 Properties
Beam Check
Sizes As Per Plan As Per Plan
Concrete Grade C40 C40
Main Reinf.Grade FE500 FE500
Shear Reinf.Grade FE420 FE420
Effective Cover(Top&Bot) 60 60

Column Check
Sizes As Per Plan As Per Plan
Concrete Grade C40 C40

Wall Check
Sizes As Per Plan As Per Plan
Concrete Grade C40 C40

3 Load Pattern Service Condition Temp. Condition

Long Term & Incremental


4 Load Case Temp. Condition
condition

5 Beam Modifier
Torsion 0.001 0.001
Edge Beam, I value about 2 & 3 axis 1.5 1.5
Internal Beam,I value about 2 & 3 axis 2 2

6 Column Modifier
I value about 2-2 1 1
I value about 3-3 1 1

7 Slab Modifier (Slab & Drop Area)


F11 1 0.5
F22 1 0.5
F12 1 1
M11 1 1
M22 1 1
M12 1 1

8 Wall Modifier
F11 1 1
F22 1 1
F12 1 1
M11 1 1
M22 1 1
M12 1 1

9 Column Rigid Zone Include Rigid Zone Not Include Rigid Zone

10 Wall Rigid Zone Include Rigid Zone Not Include Rigid Zone

11 Temp Load (Only Slab Area & No Drop


Area)
Top face - 25 deg
Bottom face - 0

12 Load Combination Long term comb. Temp.comb.

13 Design Preference ACI 318-08 ACI 318-08

14 Min.cover Slab
Clear cover top (mm) 30 30
Clear cover bottom (mm) 30 30
Inner slab rebar layer Layer B Layer B
15 Min.cover beams
Clear cover top (mm) 40 40
Clear cover bottom (mm) 40 40
Preferred bar size (flexure) 28 28
Preferred bar size (shear) 12 12

16 Automesh Slab mesh options 0.8 0.8

17 Reinf.options for cracking analysis


Tension reinf. 0.0018 0.0018
Comp reinf. 0.0018 0.0018
Cracking modulus of rupture 3.921 3.921

18 Advanced Modeling options


Active degrees of freedom Tick it No Tick

19 Design Strip Layer FE 500 FE 500

NOTE:
1 Percentage of compression reinf.will change according to deflection(Point no-17).

2 Load Combination
Service Model Temperature Model
Long Term 1.4DL
1.0Immed.-1.0Sustained+1.0Long Term 1.2DL+1.6LL
Incremental 1.2DL+1.2PTEMP+1.6LL
1.0Immed.-1.0Sustained+1.0Long Term-1.0SW Cracked 1.2DL+1.2NTEMP+1.6LL

You might also like