Date:06/12/2023 Job Risk involved Mitigation Remark WELDING (general , lack of knowledge •Proper access to be provide hot and height ) relate the safe work using ladder/tripod stand. procedure Ensure emergency access •proper access and and rescue plan before entry egress •Frequent gas testing. No •property damage ignition source •cut injuries •Provided the W-LESS •personal injuries communication •physical body •Maintain uninterrupted Problem contact with the workers by •lack of knowledge the standby man. relate the safe work •Provide access to shade at procedure about the intervals. Provide adequate height work cold water. •failure of the fall • Ensure adequate resisting system ventilation •fall of person •Provide TBT for the all •fall of object workers who are working In • Slip and trips the confined space • Electric shock •Provided the good house • Electro caution keeping • Un skilled workers •The entire place must be •lack of barricaded properly communication skill •Fire •All the electrical equipment •burn are properly checked by an authorised electrician •Provide appropriate training for those who work Lifting of material •Failure of lifting in the con fined space gears or lifting •maintain good equipment housekeeping •Back injury due to •ALL THE WORKER MUST manual material WEAR THE ALL PPE LIKE handling helmet, jacket, mask or •Individual Capability. appropriate respirators (that must be disposable) goggles etc... •Inadequate space. •All the workers are trained to do work at height •Improper lifting load •Area must be properly beyond the capacity barricaded of the individual •PROVIDE APPROPRIATE ESINGUSHER •Improper lifting •PROVIDE FIR BLANKETS techniques •Provide the training to all Lack of training, the workers relate the PASS instruction method &supervision •All the workers have the knowledge about how to use •Slippery surface the use of the fall resist /overcrowded place system •Whole watcher must be provide •Improper •Provided warning sign for housekeeping the work place •all the workers who related with the work have proper •knowledge about the rope pulley system •General housekeeping provide for the work place •All the electronic equipment’s are properly checked by an authorised electrician (lights hat provided in the shaft ) •All the workers have the sufficient knowledge about the ladder safety and the angle of ladder •TBT given for all the workers •Only approved plant will be used to transport heavy loads •Plant/Equipment used will be maintained in a good condition Licensed and experienced operators will be used to carry out this activity. •The loading of equipment will be carried out in accordance with approved document Loading will be closely supervised with trained banks men in attendance. •Rigging / Crane studies will be undertaken (if required) to ensure the lifting operation is carried out in a controlled and effective manner utilizing any existing lifting points provided. •The weight of any such load will be determined to ensure that overloading is prevented. •Only competent and approved operator shall be deployed for lifting operations. •Equipment as well as lifting jacks to be certified by competent persons before deployment. •Daily inspection of the equipment should be done by the operator. •No overloading allowed follow procedures of safe handling. •Training and assistance of banks man/ Rigger. Coordination between operator & Banks man. •Adequate Rest breaks recommended •Whenever practicable, mechanical lifting aids e.g. Cranes, forklifts trucks etc., will be used to alleviate the requirement for manual handling •Supervision will assess weight, centre of gravity etc. And determine the number of persons required to carry out the work safely. •Personnel will be trained in manual handling techniques. Avoid manual load lifting if •possible. If not then, check and ensure that the load is below the recognized permissible limit. • Workers fit for the activity to be engaged. •Area to be illuminated with adequate lighting. •Good housekeeping standards to be maintained at all times to avoid slip trips and falls. •Train the staff for good posture; •Use slip resistance shoe with toe protection and hand gloves with sufficient grip to avoid insecure hold