ENERGIZED
When the electrical solenoid @c is ENERGIZED, the pilot pressure fluid will put the check
'1 & D2" ports on their seats and open the check valves for “F1 & F2” ports.
With the electrical solenoid @ , at the control valve ® , energized at the same time the
fluid will flow into the diverter valve @ “P1’ port, and through to the ““F1" port (rear
auxiliary quick couplers @ ). Return fluid comes from the “F2 port (rear auxiliary quick
couplers @ }, and returns through the “P2” port and back to the control valve @ . When
the c'ectrical solenoid @ is energized in the oposite direction (with electrical solenoid @c.
still energized), the fluid flow will change to the opposite diection.
valves for "HYDRAULIC / HYDROSTATIC FLOW CHART
‘or Model
=~ 753 (S/N 19227 & Above)
“bobcat chart #6722406 (Printed November 1993)
NOTE
Chart shows fluid flow in Forward Drive
Position and with Hydraulic Cylinders
NOTE
Chart shows fluid flow in the Lifting
Position and with the Bucket Postioning
Valve in operation.
Partially Extended. For Hydraulic/
Hydrostatic System ion, refer to
Sheet 2 of this publication.
2208
Oo ropgem ' >
6722406 (1.99) (Shoot 1 of 2)