SAFETY INSTRUCTIONS
& WARNING
‘The folowing publications provide information on the safe use ofthe loader and attachments
1. The Dalivary Report is used to assure that complete instructions have bien given to the new owner and that the machine
isin safe operating contin.
2. The Operation & Maintenence Monuel delivered with the loader gives operating information a8 well a routine maintensnce
and service procedures. It ls part of the Towser and must stay with the machine wien fs 01d
3. The loader has machine sign (decals) which instruct onthe safe care and operation. The signs and their locations are shown
ln tho Operation & Maintenance Manual. Replacement signs are avalable from Bobcat loeder dealers.
‘4. Tho FIEI Manual delivered withthe losder gives general safety information
5. The Service Manual and Parts Manual are avalabe from Bobcat loader dealers for use by mechanics todo shop type service
and repair work.
ea
‘This notice Kontos procedures
wich mut be followed Yo wvoid
damage to the machine.
‘This symbols used forimportant safety messages. When you see thie symbol, follow the safety massage to avoid personal
injury
‘+ Wear tight fitting clothing and any other required safety apparel when operating ot servicing the loader.
‘+ Wear safety gasses when maintaining or servicing the loader.
‘Exhaust gases can kil, vent engine exhsust outdoors.
Know where fire extinguishers and fst aid kits ee located and how to use them,
Do not un the Bobest loader where exhaust, rcs, spark or hot components can contact flammable materia, explosive dust
* Check fue! and hydraulic tubes, hoses and fitings for damage and leakage, Nover use open flame or bare skin to check for
leaks. Tighten or replace eny pars that show leakage. Always clean fui spills. DO NOT use gasoline or diesel fel for cleaning
parts. Use commercial nonflammable solvents.
‘+ Clean the loader befor doing any welding. Cover rubber hoses, battery and sl other flammable parts. Keep fe
‘eat the loader when welding.
ingusher
‘+ Have good wentilstion when welding or grinding painted parts, Wear a dust mask when grinding pinted parts. Toxic dust end
as con be produced
‘+ Stop the engine and let it cool before adding fue, No smoking
* Use the procedure in this manual for connecting battery.
Use the procedure in this manual for cleaning the sperk arrestor muffler ater each 100 hous of operation.
750 Series Loeder
1 ‘Service Manuel‘SERIAL NUMBER LOCATIONS
[Always use the serial nomber of the loader when requesting
sonics information or whon erdoring parts Eatyo tor models
‘identification made by sei number] may se ifferent parts.
foritmay be necessary to use a diferent procedure in doing @
Specific service opertion
LOADER SERIAL NUMBER
‘The loader serial number plat i located on the inside of the
lott upaght. above the git
Explanation of loader Serial Number
2000 XXXX
Production Sequence
eri
Model, Engine Version
[ENGINE SERIAL NUMBER LOCATION
“The serial number is near the fel iejection pump onthe engine
bck
DELIVERY REPORT
‘The Delivery Report must be filed out bythe dealer and signed
by the ownar of operator when the Bobcat loader is delivered
{An explonation of the foem must be given to the owner. Make
ture fi filled out completely
780 Series Loader
‘Service ManuelV. BOBCAT LOADER IDENTIFICATION
OPERATOR
crap a
haa
STEERNG
REAR AUXILIARY
QUICK COUPLERS
(OPT)
FRONT AUxIARY
ere ‘QUICK COUPLER!
313555
BEE
“TIRES — Flotation tires are shown. The Bobeat loader is base-equipped with standard tires.
+ BUCKET ~ Several different buckets and other attachments are available for the Bobcat loader.
‘*ROPS, FOPS - Roll-Over Protective Structure, Falling Object Protective Structure, per SAE J1040
‘and SAE J1043. The Bobcat loader is base-equipped with standard operator cab
as shown.
‘750 Series Loader
Revised Dec. 02 am ‘Service Manual