Professional Documents
Culture Documents
OPERATION
The cable has to be connected to the 20-pin
Accessory Connector on the rear side of the
radio and into the 9-pin connector of a Data
Device (e.g. PC, Laptop, console etc.).
2
CABLE CONNECTIVITY
To Radio Accessory Connector
20 pins
EXTERNAL PTT 3
To Computer
GND 8 9 pins (female)
SWB + 13 Radio Interface Box 1 DCD
(RIB) 2 RxD
3 TxD
4 DTR
DTR 15 RS232 5 GND
CTS 17 Level Shifter 6 DSR
RTS 18 7 RTS
TxD 19 8 CTS
RxD 20 9 RI
CONNECTOR DETAIL
T o th e c o m p u te r
' #
$
R a d io In te r fa c e B o x (R IB )
'
& %
T o R a d io A c c e s s o r y
C o n n e c to r
3
DEMOUNTING OF THE CONTACTS
It might be neccessary to change the pin
position in the connector housing. The
following section describes how to remove the
contacts from the connector housing.
4
ASSEMBLING RS232 INTERFACE CABLE,
ACCESSORY CONNECTOR KIT AND
SPEAKER CABLE
The following pictures show the RS232
Interface Cable GMKN1016 assembled with
the speaker and the Accessory Connector Kit
GMBN1021 with accessory connector. The
front of both connector housings should be
flush with each other.
SERVICE
The GMKN1022 Active Data Cable is not
repairable. Order a replacement cable as
necessary.
5
© 2002 by Motorola, Inc.
6866537D35
@6866537D35@