Professional Documents
Culture Documents
KALRE Lightning Arrester Catalogue
KALRE Lightning Arrester Catalogue
In addition to ICMET, all our products have also been tested and approved by
Mechanical Test, Humus Test as well as ESE Tests wherein our brand has been shifted to
another category in this field. Therefore all KALRE products are being manufactured with
the CE Conformity Certificate. Developing market conditions and our customer demands
forced us to start producing grounding and fluctuation equipments in 2019. Considering the
principle of Brand Permanence depends on the Product Quality, KALRE is devoted himself
to control all processes starting from R&D, design, sample production, fileld tests and bulk
production in to fulfill the customer satisfaction.
KALRE
ACTIVE LIGHTNING RODS
1
An ESE lightning rod with an Early Streamer Emission system has as a target
anticipate it to the lightning strike, in order to protect all the rest of the area. The operating
principle is the same as a simple rod, but an additional ionization system getting cover a
greater protection radius.
Creates an upward leader farther away thanks to the extra ionization of the ESE
lightning rod, which is activated by the electromagnetic field produced by the storm.
The ESE attracts the lightning to its tip, then the down-conductors conduct the current
discharge to the grounding system keeping the entire installation protected.
This ionization, allows to the active protection, to have a greater protection radius.
With this methodology we managed to cover not only the structure but also its surroundings
or open areas
It is used in all buildings and facilities in our living area such as schools, hospitals,
factory buildings, base stations, fuel filling and sales stations, airports, stadiums,
apartments, summer residences, mosques, churches and synagogues.
KALRE
ACTIVE LIGHTNING RODS
2
KALRE
ACTIVE LIGHTNING RODS
XXX
Working principle: E.S.E (Early Streamer Emission) Our product works with the
electrical field intensity of the atmosphere. It transmits the electric currents formed under
charged, electric atmosphere conditions to the interior and ensures that the ion generator
located inside is charged with these electrical currents. The ion generator ionizes its
surroundings with fast charge and discharges in these conditions, making the atmosphere
more conductive. In this way, it receives the possible lightning discharge and transmits it to
the ground safely
3
TECHNICAL DRAWING
ALR 01 ALR 02
Leghth : 400 mm Leghth : 400 mm
Material : SS Stainless Steel Material : SS Stainless Steel
Diameter of the ionic cell : 200 mm Diameter of the ionic cell : 200 mm
Diameter of lightning conductor : 20 mm Diameter of lightning conductor : 20 mm
(Transparent-monolith) (Transparent-monolith)
Trigger : Neomidium Trigger : Neomidium
Principle of operation : PDC / PDA (E.S.E) Principle of operation : PDC / PDA (E.S.E)
Standart : N FC 17-102 Standart : N FC 17-102
(2011) Latest version (2011) Latest version
ΔT = 30 μs ΔT = 40 μs
RP (Radius protection) = 71 meter RP (Radius protection) = 84 meter
r(m) : 10 x I (N FC-17-102 Annex C) r(m) : 10 x I (N FC-17-102 Annex C)
1. Protection level 20 m Level I - 48 1. Protection level 20 m Level I - 58
2. Protection level 30 m Level II - 54 2. Protection level 30 m Level II - 65
3. Protection level 45 m Level III - 63 3. Protection level 45 m Level III - 75
4. Protection level 60 m Level IV- 71
KALRE 4. Protection level 60 m Level IV - 84
ACTIVE LIGHTNING RODS
4
TECHNICAL DRAWING
ALR 03 ALR 04
Leghth : 600 mm Leghth : 600 mm
Material : SS Stainless Steel Material : SS Stainless Steel
Diameter of the ionic cell : 200 mm Diameter of the ionic cell : 200 mm
Diameter of lightning conductor : 20 mm Diameter of lightning conductor : 20 mm
(Transparent-monolith) (Transparent-monolith)
Trigger : Neomidium Trigger : Neomidium
Principle of operation : PDC / PDA (E.S.E) Principle of operation : PDC / PDA (E.S.E)
Standart : N FC 17-102 Standart : N FC 17-102
(2011) Latest version (2011) Latest version
ΔT = 50 μs ΔT = 60 μs
RP (Radius protection) = 95 meter RP (Radius protection) = 107 meter
r(m) : 10 x I (N FC-17-102 Annex C) r(m) : 10 x I (N FC-17-102 Annex C)
1. Protection level 20 m Level I - 68 1. Protection level 20 m Level I - 79
2. Protection level 30 m Level II - 75 2. Protection level 30 m Level II - 86
3. Protection level 45 m Level III - 86 3. Protection level 45 m Level III - 97
4. Protection level 60 m Level IV - 95
KALRE 4. Protection level 60 m Level IV - 107
ACTIVE LIGHTNING RODS
5
TECHNICAL DRAWING
ALR 05 ALR 06
Leghth : 600 mm Leghth : 600 mm
Material : SS Stainless Steel Material : SS Stainless Steel
Diameter of the ionic cell : 200 mm Diameter of the ionic cell : 200 mm
Diameter of lightning conductor : 20 mm Diameter of lightning conductor : 20 mm
(Transparent-monolith) (Transparent-monolith)
Trigger : Neomidium Trigger : Neomidium
Principle of operation : PDC / PDA (E.S.E) Principle of operation : PDC / PDA (E.S.E)
Standart : N FC 17-102 Standart : N FC 17-102
(2011) Latest version (2011) Latest version
ΔT = 105 μs ΔT = 145 μs
RP (Radius protection) = 156 meter RP (Radius protection) = 197 meter
r(m) : 10 x I (N FC-17-102 Annex C) r(m) : 10 x I (N FC-17-102 Annex C)
1. Protection level 20 m Level I - 124 1. Protection level 20 m Level I - 164
2. Protection level 30 m Level II - 132 2. Protection level 30 m Level II - 173
3. Protection level 45 m Level III - 145 3. Protection level 45 m Level III - 186
4. Protection level 60 m Level IV - 156
KALRE 4. Protection level 60 m Level IV - 197
ACTIVE LIGHTNING RODS
6
KARLE ACTIVE LIGHTNING RODS PROTECTION RADIUS TABLE
D: Lightning progression is the step of the lightning strike along the path..
KALRE
ACTIVE LIGHTNING RODS
7
KALRE
ACTIVE LIGHTNING RODS
8
KALRE
LIGHTNING COUNTER
KLR 01
Size : 170 x 82 x 60 mm
Material : Stainless chrome (304) / PVC
Discharge measurement Power : 150 kA
Installation location : Lightning Protection Systems.
Testability : Mechanical
Standard : NF C 17-102 (2011) latest version
KALRE
ACTIVE LIGHTNING RODS
9
KALRE
LIGHTNING COUNTER
KLR 02
KALRE
ACTIVE LIGHTNING RODS
10
KALRE
ACTIVE LIGHTNING ROD TESTER
KLR 03
In the active lightning, the jump range is the test to control DT.
The purpose of this test is whether this jump interval is short-circuited when the
lightning rod is exposed to lightning current.
(To work when the electric charge in the clouds is 10-20 KV/M)if it has been
short-circuited it will not perform its function as an active lightning rod.
Use: the tester’s cable connects to the socket on the active lightning rods, the button is pressed.
if the red led is lit, the Ion Generator is malfunctioning. It can’t act as an active lightning rod.
The Green generator is solid if the green led is lit.
KALRE
ACTIVE LIGHTNING RODS
11
KALRE
LIGHTNING COUNTER TESTER
KLR 04
KALRE
ACTIVE LIGHTNING RODS
12
KALRE
SURGE ARRESTERS - VARISTOR
KLR 05
PIIIM-275/3+1 Vseries
Connection of potential - free remote monitoring
PIIIM-275/3+1
TN-S TT
TYPE CLASS LPZ +80°C IP
2 II 1 2 -40°C 20 home industry
N L1 L2 L3
123
DS
PE
TN-S
3x230/400V/50Hz
KALRE
ACTIVE LIGHTNING RODS
13
KALRE
ACTIVE LIGHTNING RODS
14
Installation Equipments
EBTKT KALRE
ACTIVE LIGHTNING RODS
EBYUTK
15
Earthing Materials
Earthing Materials
Order Code Type
ESK-SS Strip Clamp strip/strip 60x60x2mm
ESK-SD Strip Clamp strip/iron 60x60x2mm
ESKB-SS Strip Clamp (Cross) strip/strip 80x80x3mm
ESKB-SD Strip Clamp (Cross) strip/iron 80x80x3mm
EPDB Potential Balance Bus Bar (tin plated) 3x30x1000mm
ETKR Earthing Clamps (carrying the strip on the wall)
EDTBT EDTB
KALRE
ACTIVE LIGHTNING RODS
16
Alpek Hardwares and Fixture Consoles
EMİPL EJ KAN
Fixture Consoles
Order Code Type
SLS101 Fixture Consoles ( Wall )
SLS102 Fixture Consoles ( Column )
SLS103 Fixture Consoles ( Gooseneck 42x600x1,5mm )
SLS104 Fixture Consoles ( Gooseneck 42x600x1,2mm )
SLS105 Gooseneck Clamp Kit
KALRE
ACTIVE LIGHTNING RODS
17
KALRE
ACTIVE LIGHTNING RODS
18
www.kalreparatoner.com
info@kalreparatoner.com
export@kalreparatoner.com
GSM: +90 533 238 07 61
1. Sanayi Sitesi 2841 Sok. No: 9 Konak İzmir Turkey