Professional Documents
Culture Documents
1
⚫ Read Site
Clock
Design EHS
In
environment
Check
BBU
DCDU Installation
Installation
Site Sign
Rectifier
breaker
installation
1. DBS installation:
http://ilearning.huawei.com/next/learnCourse.html?courseId=6224&lan=zh_CN#/
video/18684
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page1
3.5 On-Ground Cabinet installation
10 /6.144GB
Used to connect BBU
and RRU
device
Used to
connect to
transmission device
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page4
⚫ Live Show
1
⚫ Read Site
Clock
Design EHS
In
environment
Check
BBU
DCDU Installation
Installation
Site Sign
Rectifier
JumperConnection
cn&moduleId=496413891002142720&welink_open_uri=aDU6Ly80MjE1NTIzODA3NjgwMDYvaHRtbC92
aWRlby92aWRlby5odG1sP
3BhcmFtPTk3ODI0OTMlNUUwJTVFMzM2MjU2MSU1RTQ5NjQxMzg5MTAwMjE0MjcyMCMlNUU=
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page6
Three common waterproof measures
insulation
tape
3+3 or 1+3+3
Step 1 Step 2
insulation Step 3
waterproof
tape Cable tie
tape
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page8
OT Connector Make Process
5 Press
Copyright 6 Checking
© 2014 Huawei Technologies Co., Ltd. All rights reserved. 7 PVC tape
8 Finish
OT Terminal
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page10
The installation of OT terminal and power cable
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page11
RJ45 Connector Make process
5 Checking
Copyright © 2014 Huawei Technologies6Co.,
TestLtd. All rights reserved.
RG8U Connector Make process
1 2 3
4 5 6
Antenna installation
⚫
There need lifting rope and traction rope, to prevent it hitting from tower
⚫
Follow the site design.1、Azimuth 2、Height 3、Down tilt (Mechanical
&Electrical)
Do not
tightly secure
the screws
on the
upper and
lower ,
convenient
azimuth
adjustment
of the
antenna.
And also
avoid the
antenna
drop from
the
pole.
正面
Assemble
the support
Install
the upper support
on the
antenna.
Install
the lower support
on the
antenna.
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page15
Technical point --Lay and bind the Cables
⚫
Lay and bind the Cables
Use the cable tie with white color indoor and black
color outdoor.
The distant between two cable tie is between 20cm
to 40cm (less than 25cm in perpendicular
direction), and the tie should be in the same
direction.
Smoothly cut the redundancy of the cable tie
Power cable:
The space between a power cable/ground cable
and a signaling cable outside the cabinet should be
more than 3 cm
good Without
fixed straight appearance cross
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page16
Technical point –Cables routing(reference)
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page17
⚫ Live Show
1
⚫ Read Site
Clock
Design EHS
In
environment
Check
BBU
DCDU Installation
Installation
Site Sign
Rectifier
JumperConnection
⚫ When lifting the RRU to the tower, use the traction rope to prevent it hitting
from
tower
⚫ When lift the RRU, bind the whole RRU but not only the handle of the RRU
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page20
RRU bracket installation
opening holes
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page22
GF Site Scenario
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page23
RT Site Scenario
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page24
⚫ Live Show
⚫ Read Site
Clock
Design EHS
In
environment
Check
BBU
DCDU
Installation
Installation
Site Sign
Rectifier
&
circuit Antenna
Connection
Lift
the Power cable to the tower
tensile rope
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page28
Cable Layout
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page29
Power cable connector of RRU
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page31
Color ring Principle for the cable
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page45
3.7 Service cutover (if swap or expansion scope)
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page46