Professional Documents
Culture Documents
detachable hinge
fnbutton
VIEW IN BROWSER
Summary
Box 190 x 94 with unmountable hinge (plug and play)
f k h d
4.64 hrs 1 pcs 0.35 mm 0.60 mm PET 178 g Prusa
MK3/S/S+
I made this just for practice with fusion 360 how make hinges, if you want
print the same design (190 x 94) , you need print the two parts by
separated , but you can also made de box less deep or the cover more
deep, if you did this and the hinge is in a perfect position of 180o, you can
also print the hinge ready (if you are doing this , probably you need move
the hinge after the print have done and the hinge still hot, depends in the
precisiont and de resolution of your printer).
PROBABLY YOU NEED SUPPORTS (on the hinge of the box) IF YOUR BOX IS
DEEP
for assemble the hinge put first the top side (use the image for references)
and in the bottom side of the female hinge you have a little notch to
introduces the other side of the male hinge
Model files
box.stl
cover.stl
mountable-hinge-fusion-360.f3d
Print files
box_with_supports_06n_035mm_petg_mk3s_4h38m.gcode
h PET k 0.60 mm f 0.35 mm 4.64 hrs 178 g d Prusa MK3/S/S+
License
Attribution-NonCommercial