Professional Documents
Culture Documents
SQZ
Surface Quick Zero
Fast acting alcohol-free
disinfectant for medical devices
Features
quick and effective disinfection
outstanding compatibility with all the materials, including acrylic glass
100% alcohol free
aldehydes, phenols free
excellent cleaning properties
formulation meets the newest European requirements about antimicrobial efficiency
Neutral in scent, without fragrance agents or colouring agents
dermatologically tested
Spraying and wiping is one of the most convenient applications for fast acting surface disinfectants. To reduce
inhalation of aerosols a new formulation of the disinfectant was developed in combination with special
spray heads which allows aerosol free spraying. The sprayed on foam disintegrates on the surface within a few
seconds developing mechanical action which supports cleaning.
1. Wear gloves
2. Follow Occupational Safety and Health Standards handling with flammable and combustible liquids.
3. Electrical appliances must be switched off before being disinfected. If this is impossible, precautions must be
taken to ensure that no switching occurs while disinfection is taking place. Let hot surface areas cool off before
disinfection.
i. distribute the disinfectant solution on the surface
ii. preferably use a dry wipe saturated with Surface Quick Zero
iii. spray Surface Quick Zero on areas that can not be accessed by wiping. Do not spray into device openings!
4. Wait until the exposure time has elapsed and leave to dry.
5. In cases of visible contamination, the procedure must be carried out in two steps:
a. First the contamination is removed with a dry wipe saturated with Surface Quick.
b. Disinfection is then carried out in the normal manner
Composition
100 g solution contains: 0.50 g quaternary ammonium compounds, benzyl-C12-16-alkyldimethyl, chlorides
0.25 g didecyldimethyl ammonium chloride
SQZ
Surface Quick Zero
Fast acting alcohol-free
disinfectant for medical devices
Effectiveness
Surface Quick Zero is effective against :
Envelopped viruses
(incl. HBV, HCV, HIV, vaccinia DVV / RKI 30 sec.
virus, BVDV)
Physico-chemical data
Ready-to-use
Concentration 100 %
pH-value Ca. 6 – 8
SQZ
Surface Quick Zero
Fast acting alcohol-free
disinfectant for medical devices
Article codes
Certification
Surface Quick Zero is a medical device class IIA according to Medical Device Directive 93/42/CEE and is CE0120
marked.
Helvemed has a quality management system certified by the company SGS according to ISO9001:2008 and
EN ISO 13485:2003.
Environment
Containers are made of polyethylene (HDPE) and labelled accordingly. As a result, sorting is possible for optimum
recycling. The closures are made of PP. The labels are made of PE.