Professional Documents
Culture Documents
Your supervisor has assigned you the task of preparing a simulation of a network your company has been
asked to prepare as part of a presentation. The presentation will be used to demonstrate the potential
customer how your company would design and implement the proposed network. You have been asked to
design this project in several segments that can ultimately be assembled into the full network topology.
Part 1 (Modules 1 – 3)
Step 1 – Build the network in the main wiring closet
Use the Physical mode to setup the network closet (NET 1 Wiring Closet).
Add a 2960 switch with IOS software version 15.0(2)SE4 in the rack.
Add a PC to the network table.
Access the Config tab on the PC and change the display name to NET PC1.
Connect NET PC1 FastEthernet0 to the switch FastEthernet 0/1.
Step 5 – Presentation
Present your completed project in a presentation format to your workgroup and demonstrate full
connectivity.