Professional Documents
Culture Documents
TM
ROCK SOLID
FLIGHT PROVEN
Sensor #4a - HD Low-Light Spotter: (Requires Sensor #3) Sensor #4a - HD Low-Light Spotter: (Requires Sensor #3) Stabilization and Steering
Fields-of-View: Matched to daylight Fields-of-View: Matched to daylight (3) Axis Inner (pitch/yaw/roll)
or or (2) Axis Outer (azimuth/elevation)
Sensor #4b - SWIR Spotter: (Requires Sensor #3) Sensor #4b - SWIR Spotter: (Requires Sensor #3) Vibration Isolation
(6) Axis Passive (x/y/z/pitch/roll/yaw)
Sensor #5 - Laser Rangefinder (LRF)1: Sensor #5 - Laser Illuminator (LI)2:
Laser Type: Erbium glass (ANSI Class I), Eyesafe Laser Type: Diode - (ANSI Class 4) AZ/EL Slew Rate: 0-1rad/s
Wavelength: 1540nm Wavelength: 860nm LOS Pan Range: Continuous 360°
Pulse Rate: 12 pulses/min. Modes: Continuous, Pulsed
Range: 30km Beam Divergence: Wide, Narrow or Ultra Narrow LOS Tilt Range: +90° to -120°
Range Resolution: ±5m
Sensor #6/7 - Laser Designator/Rangefinder: STANDARD INTERFACES:
Sensor #6/7 - Laser Illuminator (LI)2: (ANSI Class 4)3 5 Simultaneous EO/IR Digital and Analog
Laser Type: Diode - (ANSI Class 4) Laser Type: Diode Pumped Nd:Yag Video channels; 1080p configurable for
Wavelength: 860nm Wavelength: 1064nm/1570nm Selectable 720p,1080i, 525i & 625i digital options
Modes: Continuous, Pulsed Code Compatibility: US & NATO Laser Guided Munition MX-Hand Controller
Beam Divergence: Wide, Narrow or Ultra Narrow Rangefinding: Up to 20km
OPTIONS AVAILABLE
Range Resolution: ±2m
MCU Interfaces: Operator Interfaces:
Moving Map Interface Operator Control Unit & Joystick
Sensor #8 - Laser Spot Tracker
Serial Remote Control Moving Map system
Type: Quadrant Detector
Radar Interface GEO-Pointing
Wavelength: 1064nm
MIL STD 1553B
Code Compatibility: US & NATO Laser Guided Munition
GPS Time Sync
GPS Data
INS Data
Searchlight
Microwave
Metadata
Equipment described herein may require Canadian and/or U.S. Government authorization for export purposes.
Diversion contrary to Canadian and/or U.S. law is prohibited.
1
Consult factory for 2 3
WESCAM has a policy of continuous product Inquiries: 1 800 668 4355
specific environmental improvement. Specifications are therefore
and target conditions subject to change without notice. sales.wescam@L3T.com
January 2017