Professional Documents
Culture Documents
`
Use Drop sheet (below) to calculate
Input Parameters Standard Drop Struct. Drawing Dimension Values (m)
these properties
Est. Design Depth of U/s Q per D/s Q per Approx.
Design Crest Design U/s Bed Design D/s Bed Height of Pre-jump Conjugate Min Flared Scour
Tailwater Bund Top Cistern unit width, unit width, Depth of flow K
Discharge, Width, Bund Top Level Crest Level Level Drop Reqd, y Depth, Depth, Basin Length depth, Ds A B C D E F G H J
Depth, Level (below d/s), q1 q2 over weir, (min)
Q (m3/s) B (m) Width (m) (mAD) (mAD) (mAD) (m) d1 (m) d2 (m) (m) (m)
d3 (m) (mAD) x (m) (m3/s/m) (m3/s/m) H (m)
10.00 7.20 0.50 2.00 14.88 15.18 17.48 14.88 0.50 0.3 1.39 1.21 0.873 0.200 0.93 5.32 1.507 2.0 7.2 5.5 2.3 0.3 0.5 1.0 2.0 1.5 1.5
Notes Actual Chosen K = 1.60
- D: Must be greater than u/s head (H)
Al estiklal - H: Depth of d/s cutoff to be > than scour depth
INPUT DATA - J: Depth of u/s cutoff below bed to be 75% of d/s cutoff below bed
- K: Value is the min. to be provided, designer to specify length
Water level u/s 16.05 mOD (crest level + H)
OUTPUT DATA
'Flared' basin (@1:4) end width 9.86 m
Jet length 1.67 1.67 m (=√(4DH))
Jump length 5.53 3.64 m (=5(d2-d1))
Total length 7.20 5.32 5.32 m (adjust untill last two equal)
Pre jump velocity 6.94 6.94 m/s
Post jump velocity 1.06 1.50 m/s
Pre jump Froude No 4.96 4.96
16.05
15.18 15.38
0.93
0.20 14.38 14.88 DROWNED FLOW CALCULATION
Modular Ratio #DIV/0!
Reduction Factor #DIV/0!
#DIV/0!
1.67 3.64 #DIV/0!
5.32 #DIV/0!
#DIV/0!
LONGITUDINAL SECTION THROUGH STILLING BASIN #DIV/0!
#DIV/0!
#DIV/0!
0.35
Al estiklal
01/14/2024
35.00 9.80 0.50 2.00 15.172 15.472 17.772 15.172 0.50 0.3 3.57 2.33 1.638 0.300 1.81 9.86 1.955 2.0 9.8 10.0 2.3 0.3 0.5 2.0 2.0 1.5 2.5
Notes Actual Chosen K = 2.70
- D: Must be greater than u/s head (H)
Faraat alkhazzan main - H: Depth of d/s cutoff to be > than scour depth
INPUT DATA - J: Depth of u/s cutoff below bed to be 75% of d/s cutoff below bed
- K: Value is the min. to be provided, designer to specify length
Water level u/s 17.11 mOD (crest level + H)
OUTPUT DATA
'Flared' basin (@1:4) end width 14.73 m
Jet length 2.29 2.29 m (=√(4DH))
Jump length 12.49 7.57 m (=5(d2-d1))
Total length 14.78 9.86 9.86 m (adjust untill last two equal)
Pre jump velocity 11.90 11.90 m/s
Post jump velocity 1.28 1.97 m/s
Pre jump Froude No 6.94 6.94
17.11
15.47 15.67
1.81
0.30 14.67 15.17 DROWNED FLOW CALCULATION
Modular Ratio #DIV/0!
Reduction Factor #DIV/0!
#DIV/0!
2.29 7.57 #DIV/0!
9.86 #DIV/0!
#DIV/0!
LONGITUDINAL SECTION THROUGH STILLING BASIN #DIV/0!
#DIV/0!
#DIV/0!
0.35 Faraat alkhazzan main
01/14/2024
`
Use Drop sheet (below) to calculate
Input Parameters Standard Drop Struct. Drawing Dimension Values (m)
these properties
Est. Design Depth of U/s Q per D/s Q per Approx.
Design Crest Design U/s Bed Design D/s Bed Height of Pre-jump Conjugate Min Flared Scour
Tailwater Bund Top Cistern unit width, unit width, Depth of flow K
Discharge, Width, Bund Top Level Crest Level Level Drop Reqd, y Depth, Depth, Basin Length depth, Ds A B C D E F G H J
Depth, Level (below d/s), q1 q2 over weir, (min)
Q (m3/s) B (m) Width (m) (mAD) (mAD) (mAD) (m) d1 (m) d2 (m) (m) (m)
d3 (m) (mAD) x (m) (m3/s/m) (m3/s/m) H (m)
10.00 7.20 0.50 2.00 15.17 15.67 17.77 15.87 0.50 -0.2 1.39 1.33 0.873 0.200 0.96 4.80 1.640 2.0 7.2 5.0 2.1 -0.2 0.5 1.0 2.0 1.5 1.5
Notes Actual Chosen K = 1.60
- D: Must be greater than u/s head (H)
Faraat alkhazzan Branch - H: Depth of d/s cutoff to be > than scour depth
INPUT DATA - J: Depth of u/s cutoff below bed to be 75% of d/s cutoff below bed
- K: Value is the min. to be provided, designer to specify length
Water level u/s 16.54 mOD (crest level + H)
OUTPUT DATA
'Flared' basin (@1:4) end width 9.61 m
Jet length 1.02 1.02 m (=√(4DH))
Jump length 5.53 3.78 m (=5(d2-d1))
Total length 6.55 4.80 4.81 m (adjust untill last two equal)
Pre jump velocity 6.94 6.94
Post jump velocity 1.06 1.45 m/s
Pre jump Froude No 4.96 4.96
16.54
15.67 16.37
0.96
0.20 15.37 15.87 DROWNED FLOW CALCULATION
Modular Ratio #DIV/0!
Reduction Factor #DIV/0!
#DIV/0!
1.02 3.78 #DIV/0!
4.80 #DIV/0!
#DIV/0!
LONGITUDINAL SECTION THROUGH STILLING BASIN #DIV/0!
#DIV/0!
#DIV/0!
0.35
Faraat alkhazzan Branch
01/14/2024
`
Use Drop sheet (below) to calculate
Input Parameters Standard Drop Struct. Drawing Dimension Values (m)
these properties
Est. Design Depth of U/s Q per D/s Q per Approx.
Design Crest Design U/s Bed Design D/s Bed Height of Pre-jump Conjugate Min Flared Scour
Tailwater Bund Top Cistern unit width, unit width, Depth of flow K
Discharge, Width, Bund Top Level Crest Level Level Drop Reqd, y Depth, Depth, Basin Length depth, Ds A B C D E F G H J
Depth, Level (below d/s), q1 q2 over weir, (min)
Q (m3/s) B (m) Width (m) (mAD) (mAD) (mAD) (m) d1 (m) d2 (m) (m) (m)
d3 (m) (mAD) x (m) (m3/s/m) (m3/s/m) H (m)
10.00 7.20 0.50 2.00 17.32 17.82 19.92 17.82 0.50 0.0 1.39 1.21 0.873 0.200 0.94 5.04 1.493 2.0 7.2 5.5 2.1 0.0 0.5 1.0 1.5 1.5 1.5
Notes Actual Chosen K = 1.60
- D: Must be greater than u/s head (H)
Ali Bin Mahdi - H: Depth of d/s cutoff to be > than scour depth
INPUT DATA - J: Depth of u/s cutoff below bed to be 75% of d/s cutoff below bed
- K: Value is the min. to be provided, designer to specify length
Water level u/s 18.69 mOD (crest level + H)
OUTPUT DATA
'Flared' basin (@1:4) end width 9.72 m
Jet length 1.32 1.32 m (=√(4DH))
Jump length 5.53 3.72 m (=5(d2-d1))
Total length 6.85 5.04 5.04 m (adjust untill last two equal)
Pre jump velocity 6.94 6.94
Post jump velocity 1.06 1.47 m/s
Pre jump Froude No 4.96 4.96
18.69
17.82 18.32
0.94
0.20 17.32 17.82 DROWNED FLOW CALCULATION
Modular Ratio #DIV/0!
Reduction Factor #DIV/0!
#DIV/0!
1.32 3.72 #DIV/0!
5.04 #DIV/0!
#DIV/0!
LONGITUDINAL SECTION THROUGH STILLING BASIN #DIV/0!
#DIV/0!
#DIV/0!
0.35
Ali Bin Mahdi