Professional Documents
Culture Documents
Press SETUP
Press MAINTENANCE
Press SETUP->MAINTENANCE
Press Android Home Screen
Insert Username:
source
Selezionare il Codec:
Ogg Vorbis
WHATEVER RADIO – PARAMETERS SETTINGS
Quality Level: 0 to 1
(select appropriate, if only speech prefer 0.1, if not only
speech prefer 0.5 but if your connection is stable and
minimum 256Kbps in upload)
When the icon is black and white the APP is not broadcasting:
If the color of the icon is green the APP is connected to the server and is
broadcasting:
If the icon is red the APP is active, but is disconnected and cannot reach the server:
IMPORTANT: When the APP is activated, connected and streaming you cannot
access the settings menu.
Audio Gain: sets the streaming audio gain in dB. Use this parameters in case the
input sound level from the mixer is low.
Audio parameters: the following audio parameters set the audio streaming quality
transmission:
- Quality level: this parameter defines the sound quality. Can be set between
0.1 and 1 values. Higher quality level means higher bandwidth consumption. By
setting the value 1, the latency (the network transmission delay) will be less, than a
lower “quality level”, and even with a lower bandwidthn consumption.
- Extra buffer: with this parameter you can enlarge the capacity of temporary
storage of the audio to allow a better sound continuity in case of bad network
connections. It would be better to evaluate the setting of this parameters case by
case, because the Extra buffer activated increases the network delay.
Starting and stopping the audio transmission
In the main screen of the APP there is the yellow “Play” button:
By pressing the Play button, the APP (if is correclty configured and if the mixer is
connected to the Internet network) will connect to the streaming server, and the
button will change from “Play” to “Pause” like the following picture: