Professional Documents
Culture Documents
KM16 HP Sensor
KM16 HP Sensor
Cat.No. B01-40-B
Replaceable model is our KM71 for the
new orders received after August 2017.
Features
・ Improved environmental proof
(Operating temperature range -30 to 120℃)
・ Total Error Band: ±3%F.S.
(In the compensated temperature range)
・ IP65
・ Corresponding for lot production.
RoHS
Features of sensor
Sensor
φ8.5
Weld
New Order Discontinued KM16
Replaceable model is our KM71 for the Pressure Transmitter
new orders received after August 2017.
Specifications
Pressure range *1
Allowable maximum Accuracy *2
pressure (Atmospheric pressure 1013 hPa)
Measuring range
Room temperature: ±1.0%F.S. at constant temperature (23±2℃)
0 to 50MPa 75MPa
Total error band: ±3.0%F.S. (-30 to 120℃)
Withstand voltage 150V AC (1 minutes between case and all terminals tied)
Insulation resistance Greater than 100MΩ (50V DC between case and all terminals tied)
Shock resistance *3 1000m/s2 (6ms or less, X, Y, Z 3 times for each at room temp.)
Vibration proof 300m/s2 (20 to 1000Hz, X: 4h, Y: 2h, Z: 2hrs at room temp.)
Fitting SUS304
Case SUS304
G3/8A
M18×1.5
Fittings
G3/8A DIN 3852 Form E
HW090
Electrical
Econoseal J series〈MARK Ⅱ (+)〉
connections
AMP SEAL 16
*1 Units of psi and bar can also be manufactured. Note applications are limited to applications specified by Measurement Law.
*2 Accuracy includes the effects of followings: ①Linearity ②Hysteresis ③Repeatability
*3 Although this product is the excellent in vibration proof, shock proof, at location which a shock is generated frequently, fatigue
destruction can be generate. Avoid installation in location where shock sources are present such as an electromagnetic valve
in the same process line. Avoid using mounting with elbow fittings, etc since shock can be generated by the pressure fluctuations.
2
New Order Discontinued KM16
Replaceable model is our KM71 for the Pressure Transmitter
new orders received after August 2017.
Dimensions 1 Unit: mm
3 2 1
Part number of Part number of
2
(13)
plug housing mating connector F: 2822390-1 plug housing mating connector : 2822390-1
1
3 wire
3 wire
1: ・・ Power (+)
1: ・・ Power (+)
(19)
2: ・・ Output (+)
(17)
2: ・・ Output (+)
3: ・・ Common
3: ・・ Common
(42.5)
(40.5)
(69.5)
(11)
(11)
(67.5)
1.5
1.5
7.5
7.5
(4)
(4)
φ16±0.1 φ16±0.1
3
3
18
18
O-ring O-ring
2
2
φ15.6 Throttle φ0.7 φ15.6 Throttle φ0.7
Tightening torque 6N・m Tightening torque 6N・m
φ25 φ25
M18×1.5 M18×1.5
(φ
29 (φ
) 29
)
(13.9)
(13.9)
(27 Hex.)
(27 Hex.)
KM16-1DC KM16-5DC
3 wire
1: ・・ Power (+)
2: ・・ Common
3: ・・ Output (+)
Laser marking (φ25)
(25)
(48.5)
(75.5)
(11)
7.5
1.5
(4)
φ16±0.1
3
18
O-ring
φ15.6
2
Throttle φ0.7
φ25 M18×1.5 Tightening torque 6N・m
(φ
29
)
(13.9)
(27 Hex.)
KM16-6DC
3
New Order Discontinued KM16
Replaceable model is our KM71 for the Pressure Transmitter
new orders received after August 2017.
Dimensions 2 Unit: mm
Fitting
KM16-□CC KM16-□UC KM16-□YC
Without throttle With throttle Without throttle With throttle Without throttle With throttle
2.25±0.15
2.5+0.2
3.3±0.5
0
φ14±0.1 φ16.76 +0.05
-0.08
1.5
16 ※1
14±0.2
16
2.7
3
Label for DIN3869
must be prepared
φ25 φ21.9 by users. φ22±0.2
G3/8A Throttle φ0.7 G3/8A Throttle φ0.7 Throttle φ0.7
Tightening torque 3/4-16UNF-2A Tightening torque
O-ring P14 Tightening torque DIN3852 Form E
6N・m SAE J1926-2 6N・m
6N・m *"1" length doesn't match to length specified O-ring AS568 908
by DIN3852 Form E, make sure to secure
NBR
16.5mm and longer for valid screw depth.
Model number configuration Please specify the model number, each specs and the range for ordering.
Model
K M 1 6 C S 7 D Y
Pressure Transmitter ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ ⑮
④ S 0 to 50MPa
Pressure range *Please contact us when you wish to the other pressure range.
Please specify pressure
range and unit of measure (MPa) *1
along with corresponding 7 Room temperature: ±1.0%F.S. (23±2℃)
ordering code. ⑤Accuracy
(Atmospheric Total Error Band: ±3.0%F.S. (-30 to 120℃)
pressure 1013 hPa)
*Unit of psi and/or bar are
only available for export. ⑥Supply voltage ⑥ ⑦ ⑥Supply voltage ⑦Output signal
⑦Output signal D Y 5.0±0.5V DC 0.5 to 4.5V DC Ratio metric,
3 wire
⑮ 0 Not required
Documents 1 Required
(Documents available upon request)
Datasheet
(Drawing / Specifications)
Instruction manual
Clibration test report