1. Remove servomotor along with its locking plate from compound-regulator. 2. Release first adjusting lever from compound-regulator. 3. Release adjusting flange. 4. Release the locking screw of the spring band and spring band guide. 5. Replace damaged spring band. 6. Reassemble components by following these instructions in reverse order.
5.7. Oil regulator valve
B357J ver. 2
1. Body 14. O-ring
2. Dosing shaft 15. Needle bearing 3. Dosing nozzle 16. Needle bearing 4. Nipple 17. Retaining ring 5. Pressure spring 18. Retaining ring 6. Thrust washer 19. Non-return valve 7. Roller bearing 20. Coupling 8. Spring cotter 21. Base plate 9. Front flange (end flange) 22. Indicator 10. Hexagonal socket screw 23. Scale 11. Switch 12. O-ring B Oil to valve 13. X-ring C Oil from valve