Professional Documents
Culture Documents
Electric Forklift CPD 40-CPD 45-CPD 50
Electric Forklift CPD 40-CPD 45-CPD 50
4-St
requirements of energy saving
and emissions reduction Dovvn
} Speediness
100% charging realized in 2 hours at the soonest
Compatibility
Left
l�I IONI
) 48 v / 80 v compat1bility meeting the demand of
different voltage levels
Right Perfect Combination of Aesthetics and Functional Design
Safety
> Built-in mis-connecting protection offering self Enter
G3 series Lithium Battery Powered
isolating function under fault;
Perfect fau It self checking alarm facilitating users es.ca e
New generation with characteristics of smart, safe, high
maintenance.
Counterbalanced Forklift Truck efficiency, energy saving and environment friendly
Batter)' indicialor safety belt indicator
Maintenance Free
lault indictor Hnnd brake indicator • Unnecessary of fluid adding and dust proofing
• Daily maintenance free
U_p
'N.;1rning ot high temperature or controller S-2at indicator
High Reliability • Manual maintenance free
� "" S PE ,. (ZAPI)
\ ♦ Rght • High IP Protection Level of Vehicle.
D 14.2
II
High Safety
High Efficiency and Energy Saving
Standard configuration Optional device • Tail-free structure reduces the center of gravity and improves
lateral stability.
Standard mast Mast with other lifting height • High slrength and integraled type welded overhead guard • 2-3 hours charging meet 6-8 hours working demand.
Standard fork Full free lift mast • High-energy density, self discharging rate lower than 1% per month.
improves safety.
Class Ill standard carrier Side shifter(lntegral) • Side-pulling battery changing way is standard configuration and • 95% energy conversion rate,superior charging and discharging
Two-spools valve Other attachments performance.
Lithium battery Fork with other length improves battery changing efficiency.
• Middle-positioned battery reduces the center of gravity and • Flexible to charge, easy to operate, no impact on battery life.
Full suspension seat No marking tyre
• Unnecessary to change battery, cost saving.
Overhead guard Cab improves stability .
Solid tyres Left and right rearview mirror • High positioned rotation point of rear axle improves lateral
Traction pin Rear work light stability of the truck.
LED signal light, LED warning light(flashing) Fire extinguisher • Automatic deceleration when steering improves working safety .
USB interface Rotating warning light, voice buzzer
• Mast lifting buffering improves operation safety.
Automatic steering slow down device Blue warning light
Colour screen instrument (IN MOTION) 80V/800Ah lithium battery Improved man-machine comfort
GRAPHIC Display(ZAPI} HELi smart fleet management system
I,. . • Mast lifting and falling buffering makes operation safe and comfortable.
• The truck has lower pedal height and larger egress and ingress space.
• Suspension seat and wide view mast improve driving experience.
Suitable for working in both high and low environment • Optimal battery layout and design of counterbalance improve the rear
view.
Lithium battery is better than lead-acid baltery when working Lower layout of tilting cylinder improves the space for legs.
between -25°C and 55°C.
ANHUI HELi CO., LTD. Tel/ +86-551-63639068(America); 63639258(Europe);
Add/ No.668, FangXing Road, Hefei, China 63639358(Asia); 63662105(Africa & Middle East); Turn automatically slow down
Fax/ +86-551-63639966 63639530(Key Accounts Division); 63662105(Wheel loader) www.heliforklift.net
Character Load capacity (Load center 500mm) MoSt overal! height :For!< to theground:, Setviceweight
Mast till angle
1.01 Manufacturer HELi Max.
(kg) (mm) (kg)
1.02
1.03
Model
Configuration number
CPD40 CPD45 I CPDSO
Mastrnodel lifting h<'ighc
(mm) CPD40 CPD45 CPD50 Mast lmeered
Jmm;
Fork lifted
(with backre1c)
freelift
CPD40 CPD45 CPD50 Front/rear
GB2Li/GB3Li GB2Li/GB3Li GB2Li/GB3Li Ast: Right angle stacking aisle width a: Clearance,200mm
r--
1mm)
M250 2500 4000 4500 5000 1980 3733 150 6615 6780 7155 6-8'
□
1.04 Rated capacity 0 kg 4000 4500 5000
I I 6-8"
t
1.05 Load center distance C mm 500 500 500
M330 3300 4000 4500 5000 2380 l 4533 150 6700 6865 7240 6-8'
1.06 Power mode LithitJm 11atlery Lithium battery Lithium battAry
M350 3500 4000 4500 5000 2480 I 4733 150 6720 6885 7260 6-8"
-
1.07 Driving mode Seaterl Seated SeRted
I M370 3700 4000 4450 4900 2580 4933 150 6745 6910 7285 6-8'
1.08 Wheel base L1 mm 1960 1960 1960
M400 4000 4000 4350 4750 2780 5233 150 6785 6950 7325
I
I I 6-8'
Tyre
2.01 Tyre type I M425 4250 4000 4250 4650 2905 I 5483 150 6810 6975 I 7 350 6-8"
-�
Solid tyre Solid tyre Solid tyre
I M450 4500 4000 4150 4500 3030 5733 150 6840 7005 7380 6-8"
2 02 Wheel number ( front/rear ) 2i2 212 2/2
I
1070
(mm)
t-
3.05 Max.lifting heighl H mm 3000 3000 3000 Load capacity (Load center 500mm) Mast owral! height :Fork to thegroundi Seiviceweight
CPD40-GB2/GB3Li CPD45-GB2/GB3Li CPD50-GB2/GB3Li (kg) (kg) Mast tilt angle
3.06 Max.height under working condition H2 mm 4235 4235 4225 MJx.
imml
H4 mm 2275 2275 2270
Load curve (mm) Mast lowered
1
(with backrest) Front/rear
(mm:
3.08 Fork size: thickness x width x length TxWxL4 mm
---i----
50 X ·t50 X 1070 50x I50x "!070 50x lo()x 1070
1980 7
6000
ZM250 2500 4000 4500 5000 777 6710 6875 7250 6-8'
-f--
3.09 Fork arm carrier, DIN standard 3A 3A 3A
ZM26l 2610 4000 4500 5000 2035 792 832 6720 6885 7260
I
6-8'
3 33
5000 Note: The vertica I axis stands for load ca pacity and the horizontal axis
3.10 Truck body length ( fork excluded ) L, mm
2230 4233
2920 2920 2920
I
3.11 Truck body width mm
2380 4533
1350 1350 1500
,..._ ZM330 3300 4000 4500 5000 1177 6803 6968 7 343
I
6-8'
oi 4000
I
3.12 Turning radius mm forks to the gravity of the standard load. the standard load means a
2480 4733
r
1277
2580 2580 2580
25 4933
HS mm
6-8'
I 3000
3.14 Clearance between wheel base center and ground (loaded) non-standard forks or loading large goods, the load capacity will be
2780 5233
H6 mm
6-8'
145 145 135
3.15 2000 reduced. The load capacity of standard mast at different load center
4000 4550
Ast mm
6-8'
4540 4540 4540
1000
l
3155 5983 7180+7555
Performance
ZM475 4750 3850 4050 4350 I 1952 7015 6-8'
-
6-8'
13/14 13/14 13/14
0
I
tI ZM550 5500 3600 3750 4100 3580 67 33 2 377 7115 7280 7655
4 02 Lifting speed: loaded/unloaded
6-5"
mm/s 310/450 280/450 260/450
T
LOAD CENTER(mm) 500 800 1100
I
�- - -
4.05 Max.traction force ( loaded) N 21000 21000 21000 Free lift without bockre st will increase by 271mm.
4.06 Acceleration time ( 10m ) loaded/unloaded s 6 58/6.25 6.70/6.19 6.82/6.14
Weight
5.01 Total weight(with/without battery) kg
C-
6670/6085 6835/6150 7210/6525
- WIDE VIEW FULL FREE 3-STAGE MAST
5 02 Axle load:unloaded front/rear -
kg 3195/3505 3215/3620 3345/3865 HELi smart fieet management system (Optional) Battery Driving
5.03 Axle load:loaded front/rear kg 941;,;1:110 11J20l1/113S 11210/l(l:lb management management Load capacity (Load center 500mm) Mm overall h(>ight (For!< to theground:, Service1.�,·eight
(kg) Mast tilt angle
(mm) (kg)
Battery Ma,
CPD45 CPD50
Maslrnodel lifting height
• Vehicle positioning
tmmJ
6.01 Battery voltage/capacity V/Ah 80/542 80/606 80/606 (mm) Fork lifted \with backrfst)
Mast lowered Front/rear
(with backrest/
-
Imm:
6.02 Battery weight kg 585 685 685 • Remote diagnosis
Motor and controller
ZSM360 600 4000 4350 4900 193�- -t33 727 6915 7080 7455 6-8"
2070 T 5233 7130+7505
• Remote monitoring Vehicle Smart reports
ZSM400 4000 3950 4200 4750 867 6965 6-8'
r-
3
7.01 (S2-60min) Drive motor power(S2-60min) kW 20 20 20 management forms
ZSM435 4350 3850 4050 4450 2180 5583 977 6995 7160 7535 6-8'
-
• Maintenance reminder
7.02 {S3-15%)Lifting motor power(S3-15%) kW 26!>
I
57 33
26.5
2230
26.o
I ZSM450 4500 3800 4000 4400 1027 7015 7180 7555 6-8'
• Battery management
7.03 (S3-15%) Steering motor power(S3-15%) kW
I
2345 6033
2.5 2.5 2.5
ZSM470 4700 3700 3950 4 300 1142 7040 7205 I 7580 6-8'
7.04 Drive motor controlling mode • Statistical form
2480 6233
MOSFET/AC MOSFET/AC MOSFET/AC
l&I
7.05 Lifting motor controlling mode • Vehicle management
ZSM540 5400 3450 3700 4050 2615 6633 1412 7215 7380 7755 6-5'
MOSFET/AC MOSFET/AC MOSFET/AC 1277
7 06 Steering motor controlling mode
I
ZSM600 6000 3250 3350 3650 2850 7233 1647 7 305 7470 7845 6-5"
MOSFET/AC MOSFET/AC MOSFET/AC
• Identification recognition (optional)
Others
I
ZSM650 6500 2650 2750 3150 3015 77 33 T 1812 7365 7530 7905 6-5"
• Weight management (optional)
8233
Service brake/parking brake
3215
8.01
ZSM700 7000 2150 2250 2650 2012 7435 7600 7975 3-5
Hydraulic/mechanical Hydraulic/mAchanical
�
Hydraulic/mechanir:al
I
I I
-
8.02 Hydraulic system working pressure Mpa 20 20 21.5 • Collision management (optional) °