Professional Documents
Culture Documents
1.1 Prepare a long table or wooden platform to place the rebar on the left and right sides of the
machine with the height equal to the level of the blade mouth groove. This will make it
easier to drag the rebar into the grooves of the blade. The steel bar is not rubbed against
the blade groove or the blade body, resulting in a long blade life.
1.2 In the case that the machine is a model that uses 380 volts, 3 wires, when the power cord is
connected, turn the arrow switch to ON. The motor will work. See if the motor rotates in
the correct direction or not by the arrow attached to the back of the motor If it's the wrong
,turn the arrow to OFF and switch wires on only one pair of bridges. and turn on the
machine again the motor will rotate in the correct direction.
1.3 Connect the ground cable for safety.
2.1 Grease filling, which has 3 positions, as shown in Figure 5 and Figure 6, using a grease
cylinder. Record every day before work. Always follow the instructions attached to the
machine or your machine may be damaged and deteriorates faster, causing work to be
delayed.
3. How to change hydraulic oil