Professional Documents
Culture Documents
New 2022 Series Filter Assembly Jhbennett Com
New 2022 Series Filter Assembly Jhbennett Com
Features
• 316 Stainless Steel construction
• Accepts Pall 21⁄2 ˝ diameter elements with M3 seals
• Optional bypass valve
• Flows to 110 Lpm (30 gpm)
• Pressures to: 17.9 bar (260 psi)
• Port size: 3⁄4 ˝ and 1˝
.2
Housing pressure drop is directly proportional to specific
04
06
gravity. D E
05
.1 RA
Differential Pressure (psid)
G
IA
Flow Rate (Lpm) .07 ED
09
M
0 25 50 75 100
12
.05
8 0.5 .04
.03
0.4 .02
6
40
Differential Pressure (psid)
0.3 .01
1 2 3 4 7 10 20 30 4050 70 100
4
Flow Rate (gpm)
0.2
Poly-Fine® XLD Series Filter Cartridges
2
0.1 0.3
4.5 µm
3.0 µm
0 0 0.25
0 10 20 30
Flow Rate (gpm)
0.3 10 µm
Note: For liquid other than water, multiply the pressure drop
Differential Pressure (psid)
0.1 20 µm
0.05
0
1 2 3 4 5 6
Flow Rate (gpm)
Dimensional Drawings Table 1: Seal Options Table 2: Port Options
Housing Cartridge Seals Code Port
Code Code*
4 3/16 ˝ A12 3/4 ˝ SAE J514 straight thread
1 1/2 ˝ H N Nitrile
1˝
B12 3/4 ˝ NPT
Z V Fluoro-
carbon A16 1˝ SAE J514 straight thread
2 5/8 ˝
* Poly-Fine XLD cartridges only B16 NPT
B B
OUTLET
INLET
1 5/16 ˝ Table 3: Filter Cartridge Options
TYP
Cartridge Series Code Rating Rating Method
3 3 µm
PALL
K=13 3/4 ˝ LG Ø3 9/16 ˝ (4) 1/4-20x1/2 ˝
L=23 3/4 ˝ LG
4.5 4.5 µm
1 3/16 ˝ Poly-Fine XLD
TYP
99.9% efficiency
10 10 µm
20 20 µm
03 3 µm
04 4 µm
Dynalloy 05 5 µm Absolute
06 6 µm
REQUIRED SPACE 09 9 µm
NEEDED FOR SHELL
REMOVAL 10 12 µm
K=12-5/8 ˝
L=22-1/2 ˝
40 40 µm
Dynamesh Nominal
Ordering Information 70 70 µm
*Note: O-ring seals must be ordered separately. Order 2 pieces p/n D10540- Table 6: Differential Pressure Table 7: Mounting Bracket
456 for nitrile, 2 pieces p/n D10540-457 for fluorocarbon
Indicator Options* Options
Code Indicator Code Option
Dynamesh Cartridge P/N: E SST visual with glass 0 none
PWC - S M3* cover
1 Mounting bracket kit
Table 3 Table 4 B SST port plug
*Note: O-ring seals must be ordered separately. Order 2 pieces p/n D10540-
456 for nitrile, 2 pieces p/n D10540-457 for fluorocarbon * Note: Other indicator options
available — contact factory
© Copyright 2006, Pall Corporation. Pall, , are trademarks of Pall Corporation. ® Indicates a Pall
trademark registered in the USA. is a service mark of Pall Corporation.
7500/02 Series Spin-On Filter Assemblies
Description
Specifications
Features
Temperature Range:
Nitrile seals -20°F to 225°F (-29°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
7500:
R length–8 lbs. (3.6 kg)
S length–9 lbs. (4.1 kg)
7502:
R length–20 lbs. (9.1 kg)
S length–22 lbs. (10 kg)
Caution:
100 psi (7 bar) maximum for 7500/7502 Series non-bypass valve options (prevents possible filter element
collapse)
Dimensional Drawings
Performance
Element Pressure Drop Factor
Multiply actual flow rate times factor to determine pressure drop with fluid at 150 SUS (32 cSt), 0.9 S.G.
Correct for other viscosities by multiplying new viscosity in SUS/150 x new S.G/0.9.
Length KZ KP KN KS KT
Length KZ KP KN KS KT
7502 series uses two 7500 series elements. Factors above are for flow through both elements in a 7502.
Ordering Information
Code Seals
H Nitrile
Z* Fluorocarbon
Code Description
0 Single element
2 Double element
B NPT
16 1" 7500
20 1-1/4" 7500
24 1-1/2" 7500/7502
32 2" 7502*
KN 6 7
KS 12 12
KT 25 22
R 4
S 8
Code Description
A 25 psid
B 50 psid
W Non-bypass
Code Description
Description
Specifications
Features
Temperature Range:
Nitrile seals -20°F to 225°F (-29°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
R length– 4 lbs. (1.8 kg)
S length– 4.6 lbs. (2.1 kg)
Caution:
100 psi (7 bar) maximum for 7400 Series non-bypass valve options (prevents possible filter element collapse)
Dimensional Drawings
Performance
Length KZ KP KN KS KT
Ordering Information
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z* Fluorocarbon
B NPT
Code Size
12 3/4"
16 1"
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT* 25 22
R 4
S 8
Code Description
A 25 psid
B 50 psid
W Non-bypass
Code Description
Description
Specifications
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Materials of Construction:
Ductile iron head/cover
Steel tube
Powder coat finish
Dimensional Drawings
Performance
Length KZ KP KN KS KT
Ordering Information
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
Code Size
16 1"
20 1 1/4"
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
S 8
T 13
U 16
Code Description
A 25 psid
B 50 psid
W Non bypass
Table 7: Differential Pressure Device Options
Code Description
1 Plastic plug
Contact Information
Description
Specifications
Features
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
U length– 45 lbs. (20.5 kg)
X length– 92 lbs. (42 kg)
Caution:
120 psi (8 bar) maximum for 8300/04/14 Series
80 psi (5.5 bar) maximum for 8310
Series non-bypass valve options (prevents possible filter element collapse).
Dimensional Drawings
Performance
Length KZ KP KN KS KT
Length KZ KP KN KS KT
Length KZ KP KN KS KT
16" 0.089 0.047 0.040 0.031 0.022
Ordering Information
Assembly P/N: H 83
Table1 Table2 Table3 Table4 Table5 Table6 Table7 Table8 Table9
Element P/N: HC 83 F
Table2 Table5 Table6 Table1
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
Code Option
00 Standard capacity
10 High capacity
24 1-1/2" A, D
32 2" A, D
40 2-1/2" D
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
U 16
X 39
Code Description
A 25 psid
B 50 psid
Code Description
Description
Specifications
Features
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
R length– 9 lbs. (4.1 kg)
S length– 10 lbs. (4.6 kg)
T length– 11 lbs. (5 kg)
Dimensional Drawings
Performance
Length KZ KP KN KS KT
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
Code Size
12 3/4"
16 1"
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
R 4
S 8
T 13
Code Description
A 25 psid ± 5
B 50 psid ± 5
Code Description
Code Description
Omit No drain
Description
Specifications
Features
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
R length– 8 lbs. (3.6 kg)
S length– 9 lbs. (4.1 kg)
T length- 11 lbs. (5 kg)
Caution:
120 psi (8 bar) maximum for 8600 Series non-bypass valve options (prevents possible filter element collapse).
Dimensional Drawings
Performance
Element Pressure Drop Factor
Multiply actual flow rate times factor to determine pressure drop with fluid at 150 SUS (32 cSt), 0.9 S.G.
Correct for other viscosities by multiplying new viscosity in SUS/150 x new S.G/0.9.
Length KZ KP KN KS KT
Length DS
4" 0.17
8" 0.09
13" 0.05
Ordering Information
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
CODE OPTION
0 Standard
4 Coreless
6* High collapse
* 8606 is available with non-bypass valve options and ‘DS’ filter media
only.
CODE SIZE
12 3/4"
16 1"
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
DS* 12 10
* 8606 only.
TABLE 6: LENGTH OPTIONS*
R*** 4
S 8
T 13
CODE DESCRIPTION
A 25 psid
B 50 psid
W* Non-bypass
Code Description
Description
Specifications
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
Materials of Construction:
Cast Aluminum Head/Bowl
Fluid Compatibility:
Compatible with petroleum oils.
Not recommended for use with water based fluids.
Fluorocarbon seals are required for industrial phosphate esters, diesters and specified synthetics.
Dimensional Drawings
Performance
Length KZ KP KN KS KT
Ordering Information
Note: Choose from the options in the following tables to compile the specific Product Number.
TABLE 1: SEAL OPTIONS
Code Seals
H Nitrile
Z Fluorocarbon
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
Code Description
A 25 psid
B 50 psid
W Non bypass
Code Description
Contact Information
FOR TECHNICAL ASSISTANCE CALL TOLL FREE 1-888-333-PALL (7255)
Description
Specifications
Features
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
S length– 17 lbs. (7.75 kg)
T length– 20 lbs. (9.1 kg)
U length– 23 lbs. (10.5 kg)
Dimensional Drawings
Performance
Length KZ KP KN KS KT
Ordering Information
Assembly P/N: H 82
Table1 Table2 Table3 Table4 Table5 Table6 Table7 Table8 Table9
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
TABLE 2: ELEMENT OPTIONS
Code Option*
* 'L' = L head
'T' = T head
16 1" A, B
20 1-1/4" A,B,D
24 1-1/2" A,B,D
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
S 8
T 13
U 16
Code Description
A 25 psid
B 50 psid
Code Description
Code Description
N No ejector spring
S Ejector spring
© Copyright Pall Corporation
Description
Specifications
Features
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
S length– 23 lbs. (10.5 kg)
T length– 25 lbs. (11.4 kg)
U length– 27 lbs. (12.3 kg)
Caution:
120 psid (8 bar) maximum for non-bypass valve options
(prevents possible filter element collapse).
Dimensional Drawings
Performance
Element Pressure Drop Factor.
Multiply actual flow rate times factor to determine pressure drop with fluid at 150 SUS (32 cSt), 0.9 S.G.
Correct for other viscosities by multiplying new viscosity in SUS/150 x new S.G/0.9.
Length KZ KP KN KS KT
Ordering Information
Assembly P/N: H 88
Table1 Table2 Table3 Table4 Table5 Table6 Table7 Table8 Table9 Table10
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
00 'L' Head
10 'T' Head
Code Size
24 1-1/2"
32 2"
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
S 8
T 13
U 16
Code Description
A 25 psid
B 50 psid
W* Non-bypass
* ABFV- Anti-backflow valve, available for 'T' head units only: 8810.
Code Description
N Unmachined
B Both† sides
R* Right only†
L* Left only†
* Special order-contact factory.
† Shipping plugs provided only.
Code Description
N No ejector spring
S Ejector spring
Description
Specifications
Features
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
S length– 26 lbs. (12 kg)
T length– 28 lbs. (13 kg)
U length– 30 lbs. (14 kg)
Dimensional Drawings
Performance
Length KZ KP KN KS KT
Length KZ KP KN KS KT
Ordering Information
Assembly P/N: H 89
Table1 Table2 Table3 Table4 Table5 Table6 Table7 Table8 Table9 Table10
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
Code Option*
Code Size
32 2"
40* 2-1/2"
* D ports only.
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
S 8
T 13
U 16
Code Description
A 25 psid
B 50 psid
W* Non-bypass
* ABFV - Anti-backflow valve, available for 'T' head units only: 8910/14.
Code Description
N Unmachined
B Both† sides
R* Right only†
L* Left only†
Code Description
N No ejector spring
S Ejector spring
Description
Specifications
Features
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
S length– 24 lbs. (11 kg)
U length– 35 lbs. (16 kg)
Materials of Construction:
Ductile iron head and cover steel tube
DImensional Drawings
Performance
Length KZ KP KN KS KT
Length DP DT
Ordering Information
Element P/N: HC 96 F
Table2 Table5 Table6 Table1
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
TABLE 2: ASSEMBLY OPTIONS
0 50 Standard element
4 04 Coreless element
K Manifold mount
16 1" A, B
20 1-1/4" A,B,K
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
DP 3 5
DT 17 15
S 8
U 16
Code Description
Code Description
Description
Specifications
Features
Temperature Range:
Nitrile seals-45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals-20°F to 250°F (-27°C to 121°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
R length-3.7 lbs. (1.7 kg)
S length-5 lbs. (2.3 kg)
Dimensional Drawings
Performance
Length KZ KP KN KS KT
Length DP DT
Length KZ KP KN KS KT
Ordering Information
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
Code Rating
K Manifold mount
Code Size
12 3/4"
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
DP* 3 5
DT* 17 15
R*** 4
S 8
B 50 psid-9020/9024 only
Code Description
Contact Information
Description
Specifications
Features
Bleed Valve
Extra Long Threads
Full Flow Fast Response Bypass Valve
Ductile Head and Cap
O-Ring Seals
Heavy Wall Thickness Steel Tube
Ultipor® III Element
Optional Differential Pressure Devices
Drain Port and Plug
Flat Mounting Pad
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
1-high 61 lbs. (27.8 kg)
2-high 81 lbs. (37 kg)
3-high 101 lbs. (46 kg)
Dimensional Drawings
Performance
Length KZ KP KN KS KT
9" 0.26 0.12 0.10 0.08 0.05
Length KZ KP KN KS KT
Ordering Information
Add a "1" suffix to specify a single length element for housing length option "2" or "3". Omit to specify multiple,
single-length stacked elements. Note: Choose from the options in the following tables to compile the
specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
Code Rating
K Manifold mount
TABLE 4: FILTER ELEMENT OPTIONS
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
1 9 (9720)
2 18 (9720)
3 27 (9720)
S 8 (9724)
U 16 (9724)
V 26 (9724)
Code Description
B 50 psid
Code Description
Description
Specifications
Features
Temperature Range:
Nitrile seals -45°F to 225°F(-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
R length– 9.7 lbs. (4.4 kg)
S length– 12.1 lbs. (5.5 kg)
T length– 15.2 lbs. (6.9 kg)
Dimensional Drawings
Performance
Length KZ KP KN KS KT
4" * 1.83 0.72 0.56 0.40 0.26
*9800 only
Length DP DT
Ordering Information
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
Code Rating
12 3/4" A
16 1" A, B
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
DP* 3 5
DT* 17 15
*9851 only.
R*** 4
S 8
T 13
Code Description
Code Description
Code Description
L Indicator location
(left or right when facing inlet port)
R Left is standard
Code Description
P Drain port
Description
Specifications
Features
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
R length– 9.7 lbs. (4.4 kg)
S length– 12.4 lbs. (5.65 kg)
T length– 15.7 lbs. (7.16 kg)
Dimensional Drawings
Performance
Element Pressure Drop Factor
Multiply actual flow rate times factor to determine pressure drop with fluid at 150 SUS (32 cSt), 0.9 S.G.
Correct for other viscosities by multiplying new viscosity in SUS/150 x new S.G/0.9.
Length KZ KP KN KS KT
*9800 only.
Length DP DT
Ordering Information
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
Code Rating
K Manifold mount
12 3/4" A
16 1" A,B,D,E,K
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
DP* 3 5
DT* 17 15
*9801 only.
Table 6: Length Options*
R*** 4
S 8
T 13
Code Description
B 50 psid-9800/04 only
Code Description
2 '
P'and '
L'
3 '
P'and '
S'
Code Description
1 1 mounting bracket
2 2 mounting brackets
- No mounting brackets
© Copyright Pall Corporation
Description
Specifications
Features
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
R length– 22 lbs. (10 kg)
S length– 27 lbs. (12.3 kg)
T length– 33 lbs. (15 kg)
U length– 44 lbs. (20 kg)
Dimensional Drawings
Performance
Length KZ KP KN KS KT
* 9600 only.
Length DP DT
Ordering Information
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
Code Rating
B NPT
16 1" A,D,E
20 1-1/4" A,D,E
24 1-1/2" A,B,D,K
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
DP* 3 5
DT* 17 15
*9661 only.
R*** 4
S 8
T 13
U 16
Code Description
B 50 psid-9660/64 only
Code Description
2 '
P'and '
L'
3 '
P'and '
S'
Code Description
1 1 mounting bracket
2 2 mounting brackets
- No mounting brackets
Code Description
Y411* Heavy duty ‘B’,‘C’ or ‘K’ valve for highly cyclic applications
Description
Specifications
Features
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
T length– 80 lbs. (36.5 kg)
V length– 108 lbs. (49.2 kg)
X length– 134 lbs. (61.1 kg)
Dimensional Drawings
Performance
Length KZ KP KN KS KT
Length DP DT
Ordering Information
Element P/N: HC F
Table2 Table5 Table6 Table1
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
Code Size
24 1-1/2"
32 2"
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
DP* 3 5
DT* 17 15
*9901 only.
T 13
V 26
X 39
Code Description
W Non-bypass-9901 only
Valve options W,K,N require use of 3000 psid collapse element (series
code ending in ‘l’).
Code Description
Description
Specifications
Features
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
R length - 15 lbs. (6.8 kg)
S length - 18 lbs. (8.2 kg)
Dimensional Drawings
Performance
Length KZ KP KN KS KT
Length DP
4" 1.82
8" 0.90
Ordering Information
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
Code Rating
0 290 psid (standard)
Code Size
12 3/4"
16 1"
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
DP* 3 5
DT* 17 15
*4511 ONLY.
*Indicators fatigue rated at 3000 psi. For cyclic pressures above 3000
psi, stainless steel indicators are necessary. Designate with an 'H' in
model Code (e.g., PH, LH, etc.).
R*** 4
S 8
Code Description
Code Description
Contact Information
Description
Specifications
Features
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
S length– 33 lbs. (15 kg)
T length– 39 lbs. (17.7 kg)
Dimensional Drawings
Performance
Element Pressure Drop Factor
Multiply actual flow rate times factor to determine pressure drop with fluid at 150 SUS (32 cSt), 0.9 S.G.
Correct for other viscosities by multiplying new viscosity in SUS/150 x new S.G/0.9.
Length KZ KP KN KS KT
Length DP DT
Ordering Information
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
Code Rating
Code Size
16 1"
20 1-1/4"
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
DP* 3 5
DT* 17 15
*4611 only
*Indicators fatigue rated at 3000 psi. For cyclic pressures above 3000
psi, stainless steel indicators are necessary. Designate with an ‘H’ in
model Code (e.g., PH, DH, etc.).
S 8
T 13
Code Description
Code Description
Description
Specifications
Features
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
T length- 54 lbs. (24.5 kg)
U length- 60 lbs. (27 kg)
Dimensional Drawings
Performance
Length KZ KP KN KS KT
Length DP DT
Ordering Information
Element P/N: HC F
Table2 Table5 Table6 Table1
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
Code Size
20 1-1/4"
24 1-1/2"
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
DP* 3 5
DT* 17 15
*4711 only.
*Indicators fatigue rated at 3000 psi. For cyclic
pressures above 3000 psi, stainless steel indicators
are necessary. Designate with an ‘H’ in model code
(e.g., PH, DH, etc.).
T 13
U 16
Code Description
Code Description
Description
Specifications
Features
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
Materials of Construction:
Head, cover, handle, tube, manifold and valve bodies – aluminum alloy.
Center post, core, and internal valve parts – coated carbon steel.
Dimensional Drawings
Performance
Figure 2. Bypass Valve Pressure Drop using fluid with 0.9 S.G.
Bypass valve pressure drops are directly proportional to specific gravity.
Length KZ KP KN KS KT
Ordering Information
Assembly P/N: H 83
Table1 Table2 Table3 Table4 Table5 Table6 Table7 Table8
Element P/N: HC 83 F
Table2 Table5 Table6 Table1
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
4 10 Conventional
7 14 Coreless
Code Description
0 2 Housings (1/side)
2 4 Housings (2/side)
3 6 Housings (3/side)
4 8 Housings (4/side)
Code Size
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
TABLE 6: LENGTH OPTIONS*
U 16
X 39
Code Description
A 25 psid
B 50 psid
Code Description
2 '
P'and '
L'
3 '
P'and '
S'
Description
Specifications
Features
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C) 140°F (60°C) maximum in HWCF or water-glycol fluids
Materials of Construction:
Head, cover, handle, tube, manifold and valve bodies – aluminum alloy. Center post, core, and internal valve
parts – coated carbon steel.
Performance
Length KZ KP KN KS KT
Ordering Information
Note: Choose from the options in the following tables to compile the specific Product Number.
Table 1: Seal Options
Code Seals
H Buna N
Z Fluorocarbon
Code Element
Code Size
Code Options
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
U 16 61 lb.
X 39 82 lb.
Code Description
B 50 ± 5 psid bypass
*Caution: If non-bypass configuration is selected, do not use in systems with surge pressures over 90 psig
(8385) or 120 psig (8384), in order to avoid possible filter element collapse and containment passing
downstream.
Description
Specifications
Features
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
S length– 65 lbs. (29 kg)
T length– 75 lbs. (33.5 kg)
U length– 85 lbs. (38 kg)
Figure 2. Bypass Valve Pressure Drop using fluid with 0.9 S.G.
Bypass valve pressure drops are directly proportional to specific gravity.
Element Pressure Drop Factor.
Multiply actual flow rate times factor to determine pressure drop with fluid at 150 SUS (32 cSt), 0.9 S.G.
Correct for other viscosities by multiplying new viscosity in SUS/150 x new S.G/0.9.
Length KZ KP KN KS KT
Length DP DT
Ordering Information
Element P/N: HC F
Table2 Table4 Table5 Table1
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
Code Description
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
DP* 3 5
DT* 17 15
* 8671 only.
S 8
T 13
U 16
Code Description
Description
Specifications
Features
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
S length– 45 lbs. (21 kg)
T length– 50 lbs. (23 kg)
U length– 55 lbs. (25 kg)
Dimensional Drawings
Performance
Figure 2. Bypass Valve Pressure Drop using fluid with 0.9 S.G.
Bypass valve pressure drops are directly proportional to specific
gravity.
Length KZ KP KN KS KT
Ordering Information
Note: Choose from the options in the following tables to compile the specific Product Number.
TABLE 1: SEAL OPTIONS
Code Seals
H Nitrile
Z Fluorocarbon
20 1-1/4" All
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
S 8
T 13
U 16
Code Description
L 58 psid
Code Description
Description
Specifications
Features
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
S length– 114 lbs. (52 kg)
T length– 120 lbs. (55 kg)
U length– 131 lbs. (60 kg)
Materials:
–Ductile iron head
–Forged steel bowls
Dimensional Drawings
Performance
Length KZ KP KN KS KT
Length DP DT
Ordering Information
Element P/N: HC F
Table2 Table4 Table5 Table1
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
DP* 3 5
DT* 17 15
* 4741 only.
S 8
T 13
U 16
Code Description
B 50 psid-4740/44 only
W Non-bypass-4741 only
Code Description
Note: Above indicators fatigue rated at 3000 psi. For cyclic pressure
above 3000 psi, stainless steel indicators are necessary. Designate with
an ‘H’ in model code (e.g., PH, DH, etc.).
© Copyright Pall Corporation
Description
Specifications
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Fluid Compatibility:
Petroleum oils, water glycols, water-oil emulsions, and HWCF.
Fluorocarbon seals required for industrial phosphate esters, diesters, and specified synthetics. 140°F (60°C)
max in water containing fluids.
Materials of Construction:
Aluminum alloy head, cover and canister
Dimensional Drawings
Performance
Length KZ KP KN KS KT
4" 1.1 0.56 0.30 0.19 0.14
Ordering Information
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
R 4 2.2
S 8 2.4
Description
Specifications
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
S length– 18.5 lbs. (8.4 kg)
T length– 20.0 lbs. (9.1 kg)
U length– 23.5 lbs. (10.7 kg)
V length– 27.0 lbs. (12.3 kg)
Caution:
120 psi (8 bar) maximum for non-bypass valve options (prevents possible filter element collapse)
Dimensional Drawings
Performance
Figure 2. Bypass Valve Pressure Drop using fluid with 0.9 S.G.
Bypass valve pressure drops are directly proportional to specific gravity.
Length DP DN DS DT
Ordering Information
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
B NPT
Code Size
20 1-1/4"
24 1-1/2"
TABLE 4: FILTER ELEMENT OPTIONS
DP 3 5
DN 6 7
DS 12 12
DT 25 22
S 8
T 13
U 16
V 26
Code Description
A 25 psid
B 50 psid
W Non-bypass
Code Description
N Non-machined -
Port opposite main inlet in style consistent with main inlet port (see
Table 2) except that "A" style secondary port is used with "D" style main
inlet port.
B Both 3/4"
N Non-machined -
* Left or right side when facing inlet port. Port style consistent with main
inlet port (See Table 2), except that "A" style auxiliary port(s) is used
with "D" style main inlet port.
Description
Specifications
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
S length– 22.5 lbs. (10.2 kg)
T length– 23.7 lbs. (10.8 kg)
U length– 25.0 lbs. (11.3 kg)
V length– 31.0 lbs. (14.1 kg)
Caution:
120 psi (8 bar) maximum for non-bypass valve options (prevents possible filter element collapse)
Dimensional Drawings
Performance
Figure 2. Bypass Valve Pressure Drop using fluid with 0.9 S.G.
Bypass valve pressure drops are directly proportional to specific gravity.
Length DP DN DS DT
Ordering Information
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
B NPT
Code Size
20 1-1/4"
24 1-1/2"
TABLE 4: FILTER Element OPTIONS
DP 3 5
DN 6 7
DS 12 12
DT 25 22
S 8
T 13
U 16
V 26
Code Description
A 25 psid
B 50 psid
W Non-bypass
Code Description
N Non-machined -
Port opposite main inlet in style consistent with main inlet port (see
Table 2).
B Both 1"
N Non-machined -
* Left or right side when facing inlet port. Port style consistent with main
inlet port (See Table 2), except that "A" style auxiliary port(s) is used
with "D" style main inlet port.
Description
Specifications
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
T length– 26.0 lbs. (11.8 kg)
U length– 30.0 lbs. (13.6 kg)
V length– 35.5 lbs. (16.1 kg)
Caution:
120 psi (8 bar) maximum for non-bypass valve options (prevents possible filter element collapse)
Dimensional Drawings
Performance
Figure 2. Bypass Valve Pressure Drop using fluid with 0.9 S.G.
Bypass valve pressure drops are directly proportional to specific gravity.
Length DP DN DS DT
Ordering Information
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
B NPT
Code Size
32 2"
40 2-1/2"
DN 6 7
DS 12 12
DT 25 22
T 13
U 16
V 26
Code Description
A 25 psid
B 50 psid
W Non-bypass
Code Description
N Non-machined -
Port opposite main inlet in style consistent with main inlet port (see
Table 2).
B Both 1-1/4"
N Non-machined -
* Left or right side when facing inlet port. Port style consistent with main
inlet port (See Table 2).
Description
Specifications
Temperature Range:
-20°F to 200°F (-29°C to 93°C);
140°F (60°C) maximum in HWCF or water-glycol fluids
Materials of Construction:
Carbon steel option: carbon steel housing, nozzles, and flanges; carbon steel transfer valve body with stainless
steel 304L valve ball and stem on “D” duplex model
Stainless steel option: 304L stainless steel housing, nozzles, and flanges; 316 stainless steel transfer valve
body, valve ball, and stem on “D” duplex model
Finish:
Interior finish: coated with rust preventative
Permanent cores: tin plated
Exterior finish: two coats of zinc primer on carbon steel option
Housings are designed, manufactured, and stamped in accordance with ASME BPVC Section VIII Div. 1,
including latest addenda.
Dimensional Drawings
Dimensions (301 Series)
Port ‘A’ Simplex ‘B’ Duplex ‘C’ Duplex ‘D’ ‘E’ ‘F’ Duplex ‘G’ ‘L’ V- ‘L’ X-
Size Only Only Only Only Length Length
JO2 7.88 3.94 19.69 6.00 8.66 5.12 6.63 46.06 59.06
J03 7.88 5.12 20.87 6.00 11.42 6.89 6.63 46.06 59.06
Port ‘A’ Simplex ‘B’ Duplex ‘C’ Duplex ‘D’ ‘E’ ‘F’ Duplex ‘G’ ‘L’ V- ‘L’ X-
Size Only Only Only Only Length Length
JO3 10.00 5.12 25.12 8.00 11.42 6.89 8.63 N/A 61.75
J04 10.00 5.90 25.90 6.00 13.78 7.28 8.63 N/A 61.75
Performance
Length KZ KP KN KS KT
Length KZ KP KN KS KT
Ordering Information
Assembly P/N: H 3
Table1 Table2 Table3 Table4 Table5 Table6 Table7 Table8 Table9
Replacement
Element P/N: HC 8904F
Table5 Table6 Table1
HC 8314F
Table5 Table6 Table1
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
Code Option
01 8904 element
81 8314 element
Code Style
D Duplex
J03 3" ANSI B16.5 class 150 flanges 301 and 381 series
N03 3" ANSI B16.5 class 300 flanges 301 and 381 series
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
A 25 psid
B 50 psid
D 18 psid
E 5 psid
F 12 psid
W Non-bypass
Code Description
O No indicator
V Electrical/visual indicator
Code Option
7 Carbon steel
Description
Specifications
Temperature Range:
-20°F to 200°F (-29°C to 93°C);
140°F (60°C) maximum in HWCF or water-glycol fluids
Materials of Construction:
Carbon steel option: carbon steel housing, nozzles, and flanges; carbon steel transfer valve body with stainless
steel 304L valve ball and stem on “D” duplex model
Stainless steel option: 304L stainless steel housing, nozzles, and flanges; 316 stainless steel transfer valve
body, valve ball, and stem on “D” duplex model
Finish:
Interior finish: coated with rust preventative
Permanent cores: tin plated
Exterior finish: two coats of zinc primer on carbon steel option
Housings are designed, manufactured, and stamped in accordance with ASME BPVC Section VIII Div. 1,
including latest addenda.
Dimensional Drawings
Dimensions (307 Series)
Port ‘A’ Simplex ‘B’ Duplex ‘C’ Duplex ‘D’ ‘E’ ‘F’ Duplex ‘G’ ‘L’ V- ‘L’ X-
Size Only Only Only Only Length Length
JO4 11.85 5.90 29.60 8.00 13.78 7.28 14.00 50.06 63.06
J06 11.85 11.81 35.50 6.50 23.62 8.46 14.00 59.90 72.90
Port ‘A’ Simplex ‘B’ Duplex ‘C’ Duplex ‘D’ ‘E’ ‘F’ Duplex ‘G’ ‘L’ V- ‘L’ X-
Size Only Only Only Only Length Length
JO6 17.85 11.81 47.50 8.00 23.62 8.46 20.00 N/A 72.75
Performance
Length KZ KP KN KS KT
Length KZ KP KN KS KT
*Factors listed above have been adjusted to represent the total number of elements per housing.
Maximum Clean Element Pressure Drop for Bypass Valves
Calculated clean element pressure drop should not exceed the values listed in the table for the selected
bypass valve option.
Ordering Information
Assembly P/N: H 3
Table1 Table2 Table3 Table4 Table5 Table6 Table7 Table8 Table9
Replacement
Element P/N: HC 8904F
Table5 Table6 Table1
HC 8314F
Table5 Table6 Table1
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
Code Option
07 8904 element
87 8314 element
Code Style
D Duplex
J06 6" ANSI B16.5 class 150 flanges 307 and 387 series
N06 6" ANSI B16.5 class 300 flanges 307 and 387 series
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
A 25 psid
B 50 psid
D 18 psid
E 5 psid
F 12 psid
W Non-bypass
Code Description
O No indicator
V Electrical/visual indicator
Code Option
7 Carbon steel
Description
Specifications
Temperature Range:
-20°F to 200°F (-29°C to 93°C);
140°F (60°C) maximum in HWCF or water-glycol fluids
Materials of Construction:
Carbon steel option: carbon steel housing, nozzles, and flanges; carbon steel transfer valve body with stainless
steel 304L valve ball and stem on “D” duplex model
Stainless steel option: 304L stainless steel housing, nozzles, and flanges; 316 stainless steel transfer valve
body, valve ball, and stem on “D” duplex model
Finish:
Interior finish: coated with rust preventative
Permanent cores: tin plated
Exterior finish: two coats of zinc primer on carbon steel option
Housings are designed, manufactured, and stamped in accordance with ASME BPVC Section VIII Div. 1,
including latest addenda.
Dimensional Drawings
Dimensions (303 Series)
Port ‘A’ Simplex ‘B’ Duplex ‘C’ Duplex ‘D’ ‘E’ ‘F’ Duplex ‘G’ ‘L’ V- ‘L’ X-
Size Only Only Only Only Length Length
JO2 10.00 3.94 23.94 8.00 8.66 5.12 10.75 50.06 63.06
J03 10.00 5.12 25.12 8.00 11.42 6.89 10.75 50.06 63.06
J04 10.00 5.90 25.90 8.00 13.78 7.28 10.75 50.06 63.06
Port ‘A’ Simplex ‘B’ Duplex ‘C’ Duplex ‘D’ ‘E’ ‘F’ Duplex ‘G’ ‘L’ V- ‘L’ X-
Size Only Only Only Only Length Length
JO4 14.10 5.90 34.20 8.00 13.78 7.28 16.00 N/A 61.75
J06 14.10 11.81 40.00 8.00 23.62 8.46 16.00 N/A 61.75
Performance
Length KZ KP KN KS KT
*Factors listed above have been adjusted to represent the total number of elements per housing.
Ordering Information
Assembly P/N: H 3
Table1 Table2 Table3 Table4 Table5 Table6 Table7 Table8 Table9
Replacement
Element P/N: HC 8904F
Table5 Table6 Table1
HC 8314F
Table5 Table6 Table1
Note: Choose from the options in the following tables to compile the specific Product Number.
Code Seals
H Nitrile
Z Fluorocarbon
Code Option
03 8904 element
83 8314 element
Code Style
D Duplex
TABLE 4: PORT OPTIONS
J04 4" ANSI B16.5 class 150 flanges 303 and 383 series
N04 4" ANSI B16.5 class 300 flanges 303 and 383 series
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
A 25 psid
B 50 psid
D 18 psid
E 5 psid
F 12 psid
W Non-bypass
Code Description
O No indicator
V Electrical/visual indicator
Code Option
7 Carbon steel
Description
Specifications
Bypass Valve:
25 psid (1.724 bar)
Seals:
Nitrile–Compatible with petroleum oils, water-oil emulsions and water-glycol
Temperature Range:
-45°F to 225°F (-43°C to 107°C)
Materials:
– Aluminum head and nipple
– Aluminum and steel bypass valve
– Carbon steel canister and core assembly
Dimensional Drawings
Performance
Length KP KN KS KT
Ordering Information
Note: Choose from the options in the following tables to compile the specific Product Number.
A20 1-1/4" SAE straight thread O-ring boss per SAE J514H
A24 1-1/2" SAE straight thread O-ring boss per SAE J514H
KP 3 5
KN 6 7
KS 12 12
KT 25 22
S 9
U 19
Code Device
2 Pressure gauge (25 psi) and pressure switch (15 psi) N.O.
S.P.S.T. screw terminals
Code Description
Code Description
Description
Specifications
Features
Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Materials:
–Ductile iron head
–Forged steel bowls
Dimensional Drawings
Performance
Figure 2. Bypass Valve Pressure Drop using fluid with 0.9 S.G.
Bypass valve pressure drops are directly proportional to specific gravity.
Length KZ KP KN KS KT
Length DP DT
Ordering Information
Code Seals
H Nitrile
Z Fluorocarbon
KZ <1 2.5
KP 3 5
KN 6 7
KS 12 12
KT 25 22
DP* 3 5
DT* 17 15
* 4751 only.
S 8
T 13
U 16
Code Description
B 50 psid-4750/54 only
W Non-bypass-4751 only
Code Description
Note: Above indicators fatigue rated at 3000 psi. For cyclic pressure
above 3000 psi, stainless steel indicators are necessary. Designate with
an ‘H’ in model code (e.g., PH, DH, etc.).
Description
Ordering Information
2035 Series
High Pressure Filter Assemblies
Features
• High collapse 4500 psid (310 bard) filter element using
Rigimesh® stainless steel medium
• Flows to 38 lpm (10 gpm)
• Port sizes: 3⁄8" NPT, 1⁄2" NPT
Notes and Specifications
Maximum working pressure:
6,000 psi (413 bar)
Typical burst pressure:
min. 24,000 psi (1655 bar)
Temperature rating:
-10°F (-23°C) to 225°F (107°C)
Materials of Construction:
Head and Body: Stainless Steel
Seal material: PTFE encapsulated fluorocarbon
(Nitrile and Chloroprene also
available)
Filter element
collapse pressure: 4500 psid (310 bard)
Element
construction: Rigimesh all stainless steel (no resin
binders) medium, stainless steel
end caps
Seal Material: Chloroprene, Nitrile,
PTFE encapsulated fluorocarbon
20 1.4 4 NK 0.3
0.2
∆P (psid)
∆P (psid)
∆P (bar)
∆P (bar)
10 2 NJ 0.1
0 0 0 0
0 4 8 12 16 0 2.5 5 7.5 10
Flow (gpm) Flow (gpm)
Dimensional Drawings Part Numbers/Ordering Information
H ◆ 2035 ▼ ■ ● ✖ v ❚ (e.g., HZ2035B06NKRWE1)
FRONT VIEW (1)(2)
Code Seal Code Bypass Valve
◆ Material ✖ Type
.17
1.05 (0.28 with BH plug) H Nitrile W Non-bypass,
P Chloroprene (100 psid
indicator setting
Z PTFE where equipped)
encapsulated
fluorocarbon
v
Code ∆P Device
3.85 Options
Code Type of
▼ Port E visual, 6,000 psi
∅3.97 rated
6.67 B06 3
⁄8" NPT
B08 1
⁄2" NPT 0 No port
BH Plug
Code Filter Media
∅2.97 ■ Grade Options
.33 Code Additional
NK 5 µm ❚ Options
NJ 10 µm Omit None
++ Housing only
1” HEX 1 Mounting
bracket
Code Length assembly
TOP VIEW (1)(2) ● (nominal)
R 4"
3.00
1.102 1.102
4X .375-16 LNC-2B
THREAD .70 DEEP
Rigimesh Element Part Number
2.75 HC2035E ■ 4 ◆ Y923 (e.g., HC2035ENK4ZY923)
.984 .75
Code Filter Media Code Seal
■ Grade Options ◆ Material
INTLET
OUTLET
USA
25 Harbor Park Drive
Port Washington, NY 11050
+1 888 333 7255 (toll free in U.S. only) Visit us on the Web at www.pall.com
+1 516 484 3600 phone Pall Corporation has offices and plants throughout the world in locations including:
+1 516 484 6247 fax Argentina, Australia, Austria, Belgium, Brazil, Canada, China, France, Germany, India,
Indonesia, Ireland, Italy, Japan, Korea, Malaysia, Mexico, the Netherlands, New Zealand,
United Kingdom Norway, Poland, Puerto Rico, Russia, Singapore, South Africa, Spain, Sweden, Switzerland,
Europa House, Havant Street Taiwan, Thailand, United Kingdom, United States, and Venezuela. Distributors are located in all
Portsmouth PO1 3PD major industrial areas of the world.
Hampshire, England
+44 (0) 23 9230 3303 phone
+44 (0) 23 9230 2507 fax
m&e_sales@pall.com email
© Copyright 2007, Pall Corporation. Pall, , and Rigimesh are trademarks of Pall Corporation. ® Indicates a Pall
trademark registered in the USA. is a service mark of Pall Corporation.
2050/2060/2070 Series
High Pressure Filter Assemblies
Features
• Ultipor ® III or Rigimesh® stainless steel media
• Flows to 75 lpm (20 gpm)
• Pressures:
2050 Series: 690 bar (10,000 psi)
2060 Series: 1034 bar (15,000 psi)
2070 Series: 1379 bar (20,000 psi)
• Port sizes: 3/8″, to 3/4″
Notes and Specifications
Maximum Working Pressure:
2050 series: 690 bar (10,000 psi)
2060 series: 1000 bar (14,500 psi)
2070 series: 1379 bar (20,000 psi)
Proof Pressure:
2050 series: 1034 bar (15,000 psi)
2060 series: 1500 bar (21,750 psi)
2070 series: 2068 bar (30,000 psi)
Typical Burst Pressure:
2050 series: 2758 bar (40,000 psi)
2060 series: 3490 bar (50,750 psi) 2050, 2060, and 2070 series filter housings
2070 series: 5516 bar (80,000 psi)
Temperature Range: Nitrile seals: -43˚C to 107˚C
2070 Series
(-45˚F to 225˚F)
Fluorocarbon Seals: Flow (lpm)
-29˚C to 120˚C (–20˚F to 250˚F) 0 10 20 30 40 50 60
60˚C (140˚F) maximum in HWCF 50
3.0
or water glycol fluids with 40
Ultipor III media V06
30 V09 2.0
Filter Element W12
Collapse Pressure: 9020 series: 20 bar (290 psid); 20 V12
P (psid)
P (bar)
9021 series: 207 bar (3000 psid); 1.0
10
310 bar (4500 psid) with Rigimesh
all stainless steel media 0 0
(NK or NJ options) 0 2 4 6 8 10 12 14 16
Materials of Construction: Stainless steel; titanium bowl Flow (gpm)
(2070/71)
Element Construction: Ultipor III: Inorganic fibers impreg-
nated and bonded with epoxy Element Pressure Drop
resins; stainless steel hardware. Multiply actual flow rate times factor to determine pressure drop
Rigimesh: All stainless steel (no with fluid at 32 cSt (150 SUS), 0.9 S.G. Correct for other fluids by
resin binders) multiplying new viscosity in cSt/32 (SUS/150) x new S.G./0.9.
Note: factors are per 1000 lpm and per 1 gpm.
Pressure Drop Information
Figure 1. Housing pressure drop using fluid with 0.9 S.G. 9020 Series Filter Elements — bar/1000 lpm (psid/gpm)
Housing pressure drop is directly proportional to specific gravity.
Length
2050/2060 Series
Code KZ KP KN KS KT
Flow (lpm)
4 34.61 (1.90) 14.94 (0.82) 9.84 (0.54) 6.38 (0.35) 3.83 (0.21)
0 10 20 30 40 50 60 70
50 8 17.49 (0.96) 7.47 (0.41) 4.92 (0.27) 3.28 (0.18) 2.00 (0.11)
3.0
40 9021 Series Filter Elements — bar/1000 lpm (psid/gpm)
V06 B06
30 V09 2.0 Length
20 Code DP DS/NK DT/NJ
Δ P (psid)
Δ P (bar)
2X
10.31 mm Visual
22.10 mm Ø.406 in indicator 1.19 Hex.
.87 in Explosion 101 mm
INLET OUTLET proof indicator 4 in
95 mm
57.15 mm ‘H’ Dim. 3.75 in
2.25 in 150 Ref. mm Ref. Element change
5.9 Ref. in 104.8 mm
4.125 in
V12 port 111.4 mm
92.20 mm option only Ø4.385 in
Primary port 3.63 in
OUTLET location (2050/51 Mounting dimensions
and 2060/61 only) same as other options.
OUTLET
INLET
24.99 mm
30.23 mm
OUTLET
.984 in
INLET
1.19 in
24.99 mm
.984 in
69.85 mm
2.75 in Secondary port 4 X 3/8-16 UNC 2B Table 4: Filter Element Options Table 5: Length Options
location (2050/51 .70 deep
and 2060/61 only)
27.99 mm Code Bx(c) ≥ Element Housing Element Length (in)*
Ordering Information 1.102 in 1000 Series Code Code
KZ 3 9020 (Ultipor III) R 4 4
Assembly P/N:
KP 5 9020 (Ultipor III) S 8 8
H 20 T
KN 7 9020 (Ultipor III) * Nominal length
Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Table 8
KS 12 9020 (Ultipor III)
Ultipor Element P/N:
KT 22 9020 (Ultipor III)
HC F Y923
DP 5 9021 (Ultipor III)
Table 2 Table 4 Table 5 Table 1
Table 1: Seal Options DS 12 9021 (Ultipor III)
Rigimesh Element P/N:
Code Seals DT 15 9021 (Ultipor III)
HC 9021 E
H Nitrile NK 5 µm* 9021 (Rigimesh)
Table 4 Table 5 Table 1
Z Fluorocarbon NJ 10 µm* 9021 (Rigimesh)
* 98% efficiency
Table 2: Series Options
Table 6: Bypass Valve Options
Housing Code Description Element Code
50 690 bar (10,000 psi) housing with 50 psi Code Valve Housing Series
bypass valve 9020 B 3.4 bar (50 psid ) 2050, 2060, 2070
60 1000 bar (14,500 psi) housing with 50 psi J 10 bar (150 psid ) 2051, 2061, 2071
bypass valve 9020
S 13.8 bar (200 psid ) 2051, 2061, 2071
70 1379 bar (20,000 psi) housing with 50 psi
bypass valve 9020 W Non-bypass, 100 psid indicator 2051, 2061, 2071*
51 690 bar (10,000 psi) 9021 N Non-bypass, 35 psid indicator 2051, 2061, 2071*
61 1034 bar (15,000 psi) 9021 * Note: 2071 series does not have indicator ports
71 1379 bar (20,000 psi) 9021
Table 7: Differential Pressure Indicator Options*
Table 3: Port Options Code Indicator ‘H’ Dim.
W Explosion proof 79 mm (3.1 in)
Code Port Series
E SST visual 28 mm (1.1 in)
A08 1/2″ SAE J514 straight thread 2050/51, 2060/61
0 No indicator port N/A
A12 3/4″ SAE J514 straight thread 2050/51
B SST port plug 3 mm (0.12 in)
B06 3/8″ NPT 2050/51, 2060/61
B08 1/2″ NPT 2050/51, 2060/61 *Notes:
B12 3/4″ NPT 2050/51 1. Select 2 indicator option codes per housing
C08 1/2″ BSP ISO 228 threads 2050/51, 2060/61 2. Enter indicator codes alphabetically; put “0” code after alpha code if applicable
3. 2070/71 series does not have indicator ports; enter “00” in part number
C12 3/4″ BSP ISO 228 threads 2050/51
V06 3/8″ medium pressure threaded 2050/51, 2060/61, 2070 Table 8: Mounting Bracket Options
V09 9/16″ medium pressure threaded 2050/51, 2060/61, 2070 Code Option
V12 3/4″ medium pressure threaded 2050/51, 2060/61, 2070 0 None
W12 3/4″ weld sockets 2050/51 1 Mounting bracket kit
Portsmouth – UK
+44 (0)23 9230 3303 telephone © Copyright 2005, Pall Corporation. Pall, , Ultipor and Rigimesh are trademarks of Pall Corporation.
+44 (0)23 9230 2507 fax ® Indicates a Pall trademark registered in the USA. is a service mark of
m&e_sales@pall.com Pall Corporation.