Professional Documents
Culture Documents
Prem3 PAS24 v2
Prem3 PAS24 v2
However, entry by picking, by the all these pre-requirements. This is to certify that: Access2 Limited
Unit 35 North Tyne Industrial Estate
Longbenton, Newcastle-upon-Tyne
NE12 9SZ
United Kingdom
In respect of:
KM 526410
The use of the Kitemark is authorized in respect of the Product(s) detailed on this Certificate provided at or from the
above address.
part of the doorset, including the of the cylinders used in the tests were Page: 1 of 5
surrounding hardware that operates 45+50mm cylinders with LAM inserts First Issued: 09/11/2007 Latest Issue: 21/05/2015
Page: 1 of 6
This certificate has been issued by and remains the property of BSI Assurance UK Ltd, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP, United
(and SBS).
Kingdom and should be returned immediately upon request.
BSI Assurance UK Limited, registered in England under number 7805321 at 389 Chiswick High Road, London W4 4AL, UK.
A member of BSI Group of Companies.
mechanism.
www.access2.com
Section A.11 of the PAS24 standard In order to assess a lock’s capability doors and doors with two halves
covers Security hardware and of withstanding a criminal attack, it is (stable door). It does not cover door
Cylinder test methods and is in two necessary for it to be exposed to skilled assemblies where any frame member is
parts: manual testing that simulates such an longer than 3m.
attack. Such a simulation cannot, by its
Part 1: Attempt to remove, dislodge or
very nature, be codified so as to be fully
otherwise gain access to the cylinder
reproducible in all circumstances, and
through any protection and then break
for these reasons a formal test method
or defeat the cylinder by applying
is not published in this PAS.
a twisting or bending force. Then
attempt to defeat the lock. PAS24 specifies test methods and
acceptance criteria relevant to the
Part 2: Attempt to remove, dislodge or
enhance security performance of single
otherwise gain access to the cylinder
and double leaf, single swing, hinged,
through any protection and then
external door assemblies to dwellings,
attempt to screw self cutting traction
inward an outward opening, with
screws into the cylinder so that an
or without integral or coupled side
attempt to break or defeat the cylinder
panels and fanlights. The enhanced
by applying an axial pulling force can
security performance requirements
be made. Then attempt to defeat the
in this specification are not material-
lock.
specific. It is applicable to new door
British Standard.
This PAS is not a test of component