Professional Documents
Culture Documents
Assorted AWG 22 Jumper Wires
Assorted AWG 22 Jumper Wires
Materials needed:
Steps:
• Very Short Jumper wires(10 mm/ 20mm): Create few wires of length 10 mm and few of
20 mm in length.
• Short Jumper Wires (2 inches / 5 cm): Cut a few wires to a length of about 2 inches.
These short jumpers are handy for connecting components on a small breadboard or for
short-distance connections.
• Medium Jumper Wires (4 inches / 10 cm): Create a set of medium-length wires, around
4 inches long. These can be used for connections that require a bit more reach but are
still within the confines of a small to medium-sized breadboard.
• Long Jumper Wires (6 inches / 15 cm): Cut some wires to a length of approximately 6
inches. These longer jumpers are useful for spanning larger sections of a breadboard or
connecting components that are spaced apart.
Measure and cut wires accordingly, ensuring that you have a variety of lengths to accommodate different
scenarios. An example is shown below to refer to