Professional Documents
Culture Documents
How do I scan convert a line with end points (10, 5) and (16, 10) using a DDA algorithm?
To scan convert a line using the Digital Differential Analyzer (DDA) algorithm, you can follow these steps:
Δx = x2 - x1 = 16 - 10 = 6
Δy = y2 - y1 = 10 - 5 = 5
2. Determine the number of steps required to cover the longer of the two distances (either Δx or Δy). In
this case, Δx is longer, so you'll have 6 steps.
Dx = Δx / steps = 6 / 6 = 1
5. Begin the line drawing process by plotting the pixel closest to the line path at each step. At each step,
update the current coordinates as follows:
x = x + Dx
y = y + Dy
These are the points that, when connected, approximate the line from (10, 5) to (16, 10) using the DDA
algorithm. Note that rounding the coordinates simplifies the process for actual pixel placement. The
exact coordinates may involve fractional values, which are not practical for pixel-based displays.