Professional Documents
Culture Documents
Page: 1/57
BASF Safety data sheet according to Regulation (EC) No. 1907/2006
Date / Revised: 07.03.2012 Version: 8.0
Product: 3-(Dimethylamino)propylamine
(ID no. 30036797/SDS_GEN_EU/EN)
Date of print 08.03.2012
3-(Dimethylamino)propylamine
Chemical name: 3-aminopropyldimethylamine
CAS Number: 109-55-7
Relevant identified uses of the substance or mixture and uses advised against
Relevant identified uses: Chemical used in synthesis and/or formulation of industrial products
For the detailed identified uses of the product see appendix of the safety data sheet.
Company:
BASF SE
67056 Ludwigshafen
GERMANY
Operating Division Intermediates
2. Hazards Identification
Label elements
Page: 2/57
BASF Safety data sheet according to Regulation (EC) No. 1907/2006
Date / Revised: 07.03.2012 Version: 8.0
Product: 3-(Dimethylamino)propylamine
(ID no. 30036797/SDS_GEN_EU/EN)
Date of print 08.03.2012
Pictogram:
Signal Word:
Danger
Hazard Statement:
H314 Causes severe skin burns and eye damage.
H311 Toxic in contact with skin.
H331 Toxic if inhaled.
H302 Harmful if swallowed.
H317 May cause an allergic skin reaction.
H226 Flammable liquid and vapour.
Hazard symbol(s)
C Corrosive.
R-phrase(s)
R10 Flammable.
R20/21/22 Harmful by inhalation, in contact with skin and if swallowed.
R34 Causes burns.
R43 May cause sensitization by skin contact.
S-phrase(s)
S26 In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S45 In case of accident or if you feel unwell, seek medical advice immediately
(show the label where possible).
S24 Avoid contact with skin.
Self classification
Flam. Liq. 3
Acute Tox. 3 (Inhalation - vapour)
Acute Tox. 4 (oral)
Acute Tox. 3 (dermal)
Skin Corr./Irrit. 1B
Skin Sens. 1
Possible Hazards:
Flammable.
Harmful by inhalation, in contact with skin and if swallowed.
Causes burns.
May cause sensitization by skin contact.
Page: 4/57
BASF Safety data sheet according to Regulation (EC) No. 1907/2006
Date / Revised: 07.03.2012 Version: 8.0
Product: 3-(Dimethylamino)propylamine
(ID no. 30036797/SDS_GEN_EU/EN)
Date of print 08.03.2012
For the classifications not written out in full in this section the full text can be found in section 16.
Other hazards
If applicable information is provided in this section on other hazards which do not result in classification
but which may contribute to the overall hazards of the substance or mixture.
3. Composition/Information on Ingredients
Substances
Chemical nature
Contains:
3-aminopropyldimethylamine; N,N-dimethyl-1,3-diaminopropane
Content (W/W): >= 99.8 % Flam. Liq. 3
CAS Number: 109-55-7 Acute Tox. 3 (Inhalation - vapour)
EC-Number: 203-680-9 Acute Tox. 4 (oral)
INDEX-Number: 612-061-00-6 Acute Tox. 3 (dermal)
Skin Corr./Irrit. 1B
Skin Sens. 1
H314, H311, H331, H302, H317, H226
Hazardous ingredients
according to Directive 1999/45/EC
3-aminopropyldimethylamine; N,N-dimethyl-1,3-diaminopropane
Content (W/W): >= 99.8 %
CAS Number: 109-55-7
EC-Number: 203-680-9
INDEX-Number: 612-061-00-6
Hazard symbol(s): C
R-phrase(s): 10, 20/21/22, 34, 43
For the classifications not written out in full in this section, including the indication of danger, the hazard
symbols, the R phrases, and the hazard statements, the full text is listed in section 16.
4. First-Aid Measures
Description of first aid measures
First aid personnel should pay attention to their own safety. If the patient is likely to become
unconscious, place and transport in stable sideways position (recovery position). Immediately remove
contaminated clothing.
Page: 5/57
BASF Safety data sheet according to Regulation (EC) No. 1907/2006
Date / Revised: 07.03.2012 Version: 8.0
Product: 3-(Dimethylamino)propylamine
(ID no. 30036797/SDS_GEN_EU/EN)
Date of print 08.03.2012
If inhaled:
Keep patient calm, remove to fresh air, seek medical attention. Immediately inhale corticosteroid dose
aerosol.
On skin contact:
Immediately wash thoroughly with plenty of water, apply sterile dressings, consult a skin specialist.
On ingestion:
Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.
5. Fire-Fighting Measures
Extinguishing media
Suitable extinguishing media:
water spray, dry powder, foam, carbon dioxide
Further information:
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.
Environmental precautions
Do not discharge into drains/surface waters/groundwater.
Conditions for safe storage, including any incompatibilities:Segregate from acids and acid forming
substances.
Storage stability:
Storage duration: 24 Months
From the data on storage duration in this safety data sheet no agreed statement regarding the
warrantee of application properties can be deduced.
PNEC
freshwater: 0.0535 mg/l
DNEL
worker:
Long-term exposure - systemic and local effects, Inhalation: 4.9 mg/m3
Exposure controls
Personal protective equipment
Respiratory protection:
Respiratory protection in case of vapour/aerosol release. Gas filter for gases/vapours of organic
compounds (boiling point >65 °C, e. g. EN 14387 Type A) Consider the risk management measures as
outlined in the exposure scenario.
Hand protection:
Chemical resistant protective gloves (EN 374)
Suitable materials also with prolonged, direct contact (Recommended: Protective index 6,
corresponding > 480 minutes of permeation time according to EN 374):
fluoroelastomer (FKM) - 0.7 mm coating thickness
Suitable materials short-term contact and/or splashes (recommended: At least protective index 2,
corresponding > 30 minutes of permeation time according to EN 374)
butyl rubber (butyl) - 0.7 mm coating thickness
nitrile rubber (NBR) - 0.4 mm coating thickness
Manufacturer's directions for use should be observed because of great diversity of types.
Supplementary note: The specifications are based on tests, literature data and information of glove
manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g.
temperature) it must be considered, that the practical usage of a chemical-protective glove in practice
may be much shorter than the permeation time determined through testing.
Eye protection:
Tightly fitting safety goggles (cage goggles) (e.g. EN 166) and face shield.
Body protection:
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting
boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of
dust).
Form: liquid
Colour: colourless to yellow
Odour: amine-like
pH value: 12.7
(100 g/l, 20 °C)
Melting point: < -50 °C
Boiling point: 135.1 °C (measured)
(1,013 hPa)
Flash point: 30 °C (DIN 51755)
Lower explosion limit: 2.3 %(V)
Upper explosion limit: 12.3 %(V)
Ignition temperature: 215 °C (DIN 51794)
Vapour pressure: 5.9 hPa (measured)
(20 °C)
static
Density: 0.820 g/cm3
(15 °C)
0.818 g/cm3
(20 °C)
0.785 g/cm3
(50 °C)
Solubility in water: miscible
(20 °C)
Partitioning coefficient n-octanol/water (log Kow): -0.352 (OECD Guideline 107)
(25 °C)
Self ignition: Temperature: 20 °C
not self-igniting
Other information
pKA: 9.33
(35 °C)
Hygroscopy: hygroscopic
Surface tension:
Based on chemical structure, surface
activity is not to be expected.
Grain size distribution: The substance / product is marketed or used in a non solid or
granular form.
Molar mass: 102.18 g/mol
Chemical stability
The product is stable if stored and handled as prescribed/indicated.
Conditions to avoid
Avoid all sources of ignition: heat, sparks, open flame.
Incompatible materials
Substances to avoid:
Copper, strong acids, oxidizing agents, brass
Acute toxicity
Experimental/calculated data:
LD50 rat (oral): 410 mg/kg (OECD Guideline 401)
LC50 rat (by inhalation): > 4.3 mg/l 4 h (OECD Guideline 403)
No mortality was observed. The vapour was tested.
Irritation
Experimental/calculated data:
Skin corrosion/irritation rabbit: Corrosive. (BASF-Test)
Respiratory/Skin sensitization
Assessment of sensitization:
Sensitization after skin contact possible.
Experimental/calculated data:
Guinea pig maximization test guinea pig: skin sensitizing
Assessment of mutagenicity:
Most of the results from the available studies show no evidence of a mutagenic effect.
Carcinogenicity
Assessment of carcinogenicity:
No data available concerning carcinogenic effects.
Under certain conditions the substance can form nitrosamines. Nitrosamines are carcinogenic in
animal studies.
Reproductive toxicity
Developmental toxicity
Assessment of teratogenicity:
No indications of a developmental toxic / teratogenic effect were seen in animal studies.
Experiences in humans
Experimental/calculated data:
Lung function impairment:
Repeated dose toxicity and Specific target organ toxicity (repeated exposure)
Aspiration hazard
Toxicity to fish:
LC50 (96 h) 122 mg/l, Leuciscus idus (DIN 38412 Part 15, static)
The details of the toxic effect relate to the nominal concentration.
Aquatic invertebrates:
EC50 (48 h) 59.5 mg/l, Daphnia magna (Directive 79/831/EEC, static)
The details of the toxic effect relate to the nominal concentration.
Aquatic plants:
EC50 (72 h) 53.5 mg/l (biomass), Scenedesmus subspicatus (DIN 38412 Part 9, static)
The details of the toxic effect relate to the nominal concentration.
Elimination information:
60 - 70 % BOD of the ThOD (20 d) (OECD 301D; EEC 92/69, C.4-E) (aerobic, activated sludge,
domestic, adapted)
Literature data.
90 - 100 % BOD of the ThOD (28 d) (OECD 301 A (new version)) (aerobic, activated sludge,
domestic, adapted)
The product has not been tested. The statement has been derived from products of a similar structure
or composition.
Bioaccumulative potential
Bioaccumulation potential:
Page: 12/57
BASF Safety data sheet according to Regulation (EC) No. 1907/2006
Date / Revised: 07.03.2012 Version: 8.0
Product: 3-(Dimethylamino)propylamine
(ID no. 30036797/SDS_GEN_EU/EN)
Date of print 08.03.2012
Because of the n-octanol/water distribution coefficient (log Pow) accumulation in organisms is not to
be expected.
According to Annex XIII of Regulation (EC) No.1907/2006 concerning the Registration, Evaluation,
Authorisation and Restriction of Chemicals (REACH): Not fulfilling PBT
(persistent/bioaccumulative/toxic) criteria. Self classification
According to Annex XIII of Regulation (EC) No.1907/2006 concerning the Registration, Evaluation,
Authorisation and Restriction of Chemicals (REACH): Not fulfilling vPvB (very persistent/very
bioaccummulative) criteria. Self classification
Additional information
A waste code in accordance with the European waste catalog (EWC) cannot be specified, due to
dependence on the usage.
The waste code in accordance with the European waste catalog (EWC) must be specified in
cooperation with disposal agency/manufacturer/authorities.
Contaminated packaging:
Contaminated packaging should be emptied as far as possible; then it can be passed on for recycling
after being thoroughly cleaned.
Land transport
ADR
Hazard class: 8
Packing group: II
ID number: UN 2734
Hazard label: 8, 3
Proper shipping name: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S. (contains
Page: 13/57
BASF Safety data sheet according to Regulation (EC) No. 1907/2006
Date / Revised: 07.03.2012 Version: 8.0
Product: 3-(Dimethylamino)propylamine
(ID no. 30036797/SDS_GEN_EU/EN)
Date of print 08.03.2012
3-AMINOPROPYLDIMETHYLAMINE)
RID
Hazard class: 8
Packing group: II
ID number: UN 2734
Hazard label: 8, 3
Proper shipping name: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S. (contains
3-AMINOPROPYLDIMETHYLAMINE)
Sea transport
IMDG
Hazard class: 8
Packing group: II
ID number: UN 2734
Hazard label: 8, 3
Marine pollutant: NO
Proper shipping name: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S. (contains
3-AMINOPROPYLDIMETHYLAMINE)
Air transport
IATA/ICAO
Hazard class: 8
Packing group: II
ID number: UN 2734
Hazard label: 8, 3
Proper shipping name: AMINES, LIQUID, CORROSIVE, FLAMMABLE, N.O.S. (contains
3-AMINOPROPYLDIMETHYLAMINE)
If other regulatory information applies that is not already provided elsewhere in this safety data sheet,
then it is described in this subsection.
Page: 14/57
BASF Safety data sheet according to Regulation (EC) No. 1907/2006
Date / Revised: 07.03.2012 Version: 8.0
Product: 3-(Dimethylamino)propylamine
(ID no. 30036797/SDS_GEN_EU/EN)
Date of print 08.03.2012
16. Other Information
Full text of the classifications, including the indication of danger, the hazard symbols, the R phrases,
and the hazard statements, if mentioned in section 2 or 3:
C Corrosive.
10 Flammable.
20/21/22 Harmful by inhalation, in contact with skin and if swallowed.
34 Causes burns.
43 May cause sensitization by skin contact.
Flam. Liq. Flammable liquid
Acute Tox. Acute toxicity
Skin Corr./Irrit. Skin corrosion/irritation
Skin Sens. Skin sensitization
H314 Causes severe skin burns and eye damage.
H311 Toxic in contact with skin.
H331 Toxic if inhaled.
H302 Harmful if swallowed.
H317 May cause an allergic skin reaction.
H226 Flammable liquid and vapour.
The data contained in this safety data sheet are based on our current knowledge and experience and
describe the product only with regard to safety requirements. The data do not describe the product's
properties (product specification). Neither should any agreed property nor the suitability of the product for
any specific purpose be deduced from the data contained in the safety data sheet. It is the responsibility of
the recipient of the product to ensure any proprietary rights and existing laws and legislation are observed.
Vertical lines in the left hand margin indicate an amendment from the previous version.
Page: 15/57
BASF Safety data sheet according to Regulation (EC) No. 1907/2006
Date / Revised: 07.03.2012 Version: 8.0
Product: 3-(Dimethylamino)propylamine
(ID no. 30036797/SDS_GEN_EU/EN)
Date of print 08.03.2012
2. Use as an intermediate
SU3; ERC6a; PROC1, PROC2, PROC3, PROC4, PROC8a, PROC8b, PROC9
3. Use in laboratories
SU3; ERC4, ERC6a; PROC15
6. Use in coatings
SU3; ERC5; PROC7, PROC8a, PROC8b, PROC10, PROC13; PC9
7. Use in coatings
SU22; ERC8c, ERC8f; PROC8a, PROC8b, PROC10, PROC11, PROC13; PC9
9. Use as Monomer
SU22; ERC8c, ERC8f; PROC14; PC9, PC32
****************
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
Page: 17/57
BASF Safety data sheet according to Regulation (EC) No. 1907/2006
Date / Revised: 07.03.2012 Version: 8.0
Product: 3-(Dimethylamino)propylamine
(ID no. 30036797/SDS_GEN_EU/EN)
Date of print 08.03.2012
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Page: 18/57
BASF Safety data sheet according to Regulation (EC) No. 1907/2006
Date / Revised: 07.03.2012 Version: 8.0
Product: 3-(Dimethylamino)propylamine
(ID no. 30036797/SDS_GEN_EU/EN)
Date of print 08.03.2012
Physical state Liquid, moderate fugacity
480 min 5 days per week
Duration and Frequency of activity
Indoor/Outdoor Indoor
Exposed skin area Both hands (960 cm²)
Risk Management Measures
Avoid frequent and direct contact with
substance. Clean equipment and the
work area every day. Supervision in
place to check that the RMMs in place
are being used correctly and OCs
followed. Ensure minimization of
manual phases
Use suitable eye protection. Wear
chemically resistant gloves in
combination with specific activity
training Wear suitable coveralls to
prevent exposure to the skin.
Risk Management Measures are
based on qualitative risk
characterisation.
Provide extract ventilation to points
Effectiveness: 90 %
where emissions occur (LEV).
Wear suitable respiratory protection. Effectiveness: 90 %
Exposure estimate and reference to its source
Assessment method ECETOC TRA v2.0 Worker
Worker - inhalative, long-term - local und systemic
Exposure estimate 2.129 mg/m³
Risk Characterization Ratio (RCR) 0.435
The short-term exposure value corresponds to the
long-term value multiplied by a factor of 2.
Assessment method Qualitative assessment
Worker - dermal
Guidance to Downstream Users
For scaling see: http://www.ecetoc.org/tra
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
****************
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Indoor/Outdoor Indoor
Exposed skin area Palm of one hand (240 cm²)
Risk Management Measures
Use suitable eye protection. Wear
chemically resistant gloves in
combination with intensive
management supervision control.
Wear suitable coveralls to prevent
exposure to the skin.
Risk Management Measures are
based on qualitative risk
characterisation., Personal measures
have to be applied in case of potential
exposure only.
Exposure estimate and reference to its source
Assessment method ECETOC TRA v2.0 Worker
Worker- inhalative, short-term - local und systemic
Exposure estimate 0.043 mg/m³
Risk Characterization Ratio (RCR) 0.009
The short-term exposure value corresponds to the
long-term value multiplied by a factor of 2.
Assessment method Qualitative assessment
Worker - dermal
Guidance to Downstream Users
For scaling see: http://www.ecetoc.org/tra
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
****************
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
****************
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
****************
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
****************
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
Concentration of the substance
N,N-dimethyl-1,3-diaminopropane
Page: 41/57
BASF Safety data sheet according to Regulation (EC) No. 1907/2006
Date / Revised: 07.03.2012 Version: 8.0
Product: 3-(Dimethylamino)propylamine
(ID no. 30036797/SDS_GEN_EU/EN)
Date of print 08.03.2012
Content: >= 0 % - <= 100 %
****************
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
****************
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Indoor/Outdoor Indoor
Exposed skin area Both hands and main part of the arms (1980 cm²)
Risk Management Measures
Avoid frequent and direct contact with
substance. Supervision in place to
check that the RMMs in place are
being used correctly and OCs
followed. Clean equipment and the
work area every day. Ensure
minimization of manual phases
Use suitable eye protection. Wear
chemically resistant gloves in
combination with specific activity
training Wear suitable coveralls to
prevent exposure to the skin.
Risk Management Measures are
based on qualitative risk
characterisation.
Provide extract ventilation to points
Effectiveness: 75 %
where emissions occur (LEV).
Wear suitable respiratory protection. Effectiveness: 90 %
In case no respiratory protection is
used:, Reduce duration of activity to
less than 60 min, Alternatively:,
Reduce concentration to less than
80%
Exposure estimate and reference to its source
Assessment method ECETOC TRA v2.0 Worker
Worker - inhalative, long-term - local und systemic
Exposure estimate 0.5 mg/m³
Risk Characterization Ratio (RCR) 0.102
The short-term exposure value corresponds to the
ECETOC TRA initial exposure value multiplied by a factor of
2.
Assessment method Qualitative assessment
Worker - dermal
Guidance to Downstream Users
For scaling see: http://www.ecetoc.org/tra
****************
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
****************
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
****************
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
Operational conditions
3-aminopropyldimethylamine;
N,N-dimethyl-1,3-diaminopropane
Concentration of the substance
Content: >= 0 % - <= 100 %
****************