The document provides instructions for disconnecting and reconnecting the battery in a Peugeot 307, including closing doors and windows, waiting 2 minutes after disconnecting the battery and 5 minutes if working on airbags or seatbelts. It also describes initializing the power windows and remote control after reconnecting the battery which involves opening and closing the windows fully and holding remote control buttons for 4 seconds with the ignition on and off.
The document provides instructions for disconnecting and reconnecting the battery in a Peugeot 307, including closing doors and windows, waiting 2 minutes after disconnecting the battery and 5 minutes if working on airbags or seatbelts. It also describes initializing the power windows and remote control after reconnecting the battery which involves opening and closing the windows fully and holding remote control buttons for 4 seconds with the ignition on and off.
The document provides instructions for disconnecting and reconnecting the battery in a Peugeot 307, including closing doors and windows, waiting 2 minutes after disconnecting the battery and 5 minutes if working on airbags or seatbelts. It also describes initializing the power windows and remote control after reconnecting the battery which involves opening and closing the windows fully and holding remote control buttons for 4 seconds with the ignition on and off.
Battery: procedures for disconnection/reconnection
Before disconnecting the battery Close all the doors Close the windows Convertible models: Close the convertible roof Turn the engine off Wait for 2 minutes After disconnecting the battery When working on pyrotechnic components (e.g. airbags, seat belt pretensioners): Wait for 5 minutes After reconnecting the battery Turn the ignition on Wait for 1 minute The engine can be started Initialising the power windows Close the driver's window Press and hold the power window close switch Until the window is fully closed Wait for 1 second Release the switch Open the driver's window Press and hold the power window switch Open the window fully Release the switch Press the switch again Wait for 1 second Release the switch Repeat the procedure for the passenger's window Initialising the remote control Turn the ignition off and on Press and hold any button on the remote control to be programmed Wait for 4 seconds Turn the ignition off Remove the key from the ignition switch