JYOTI INDUSTRIES (INDIA)
409, Kalas Udyog Bhavan, Satara ass Tad
Near Centr Bazar Werk Mana 200078.
Telos sot 733002004, 08
Ema chicDebardn« Webshe waebnain
Sto: 2TAACEOSINTEY
‘Customer Care Number: 1800-120431550.
DATASHEET
Sr.No. Model Name Size in (mm) Drawing
ARICO BIG
1 | Arico~ Big 155x155
em —
ARICO SMALL
— 130mm ——
[106 mm —j
2 | Arico~ Small 130x130
Row Material Grade AISI 304 ~18/8
Raw Material Thickness 1mm
Note:
‘Testing Sheet is attached.
- Raw Material MTC attached
Thanks & Regards
For Jyoti Industries (India)JYOTI INDUSTRIES (INDIA)
FACTORY TEST REPORT
“TYPE: ARICO BIG FLOOR DRAIN
BATCH QTY: 300 Pcs
DATE OF TESTI
[Standard Specification ‘Required
minal Thickness of Sha fLomn,
[Thickness at any point (after ioming) [075 mm rainy
0 rm (ria)
50 mm (rin)
[CHECK LIST
[7-1 Floor Oran shal bo Constructed ot Fe TONES PreETCAT HUTIBST OT STORE
|compatite wih the manufacturing practice tp ensure a smooth surface, The
surtaces shal be tre from any sharp edges. Flor Drain bowl shal have rounded
|corers to faclitate cleaning. Allsurtece shal be adequately cleared of inside
land outside the Floor Drain
No sharp edge cbserved. Rounded
‘corner and clean sutace found
[GL7-7.1- the odgos ofany Polos in he Foor Bran thal nol show any evidane
Jct undulation, chips, cracks or any other detect wrich woud impal ls eppearance
lr perlormanc,
Ho undulation, cigs, cracks or any
other defeat found,
[OLT-2-Wihen ine Foor Drains pained Wom a Getanee oT OW = THO mm Wom
lexposed sutaces, shal be ies from visible defects. The visual examination
shall be caried out with untorm illumination at fre surface ofthe Floor Drain of
Fleor Drain fourd ire fom visible
[S00 ux and withthe Drain positioned so that is batween the ight souree ard see
lbsarver
[OL7.4~ Waste Cutt Foor Drain bowls shallbe designed constructed wit a i] a
tothe waste culo. The waste outlet ting shall be recessed ype. Saeoy
[#25] per oninaybe ssa in ach dt ah ei bai ae
CHECKED 8 APPROVED BY DATE 020322
DIUP SINGH
DESIGNATION ;-OUALITY & PRODUCTION ENGINEERJYOTI INDUSTRIES (INDIA)
FACTORY TEST REPORT
‘TYPE: ARICO SMALL FLOOR DRAIN
BATCH TY: 300 Pe's
DATE OF TESTING: 26.03.2002
jandard Specification aquired
Nominal Thickness of Sheet f.0mm
[Thicknoas at any point (tier fenring) 6.75 mm (ri
Length 25 mm (ein)
CHECK UST Frc 26 mm (rn)
Left and Right Gap 0mm mn}
'op & Bottom Gap (0 mm imn)
Fish Finish
CHECK UST
lcompatiie with the manufacturing practce to ensure a smooth surlace. The
[surfaces shall be free trom any sharp edges. Floor Drain bow! shall have rounded
\corners to faciitate cleaning. Al surface shall be adequately cleaned off inside ana|
loutsde the Floor Drain,
[7a-Flcor Drain shell be constructed ofthe lovest practical numbers of sectons J
No sharp edge observed. Roundod|
‘corner and clean surface found.
[CL7.1.1 The edges of any helos inthe Floot Brann shallnet show any evilence
lof undulation, chips, cracks or any ether defect which would impair ts appearance
lorperformance.
‘No undulation, chips, cracks or any
‘other dafect found.
[CL7Z-When The Floor Draln is examined from a stance of 600 100 mat from
lexposed surfaces, it shal be free from visible defects. The visual examinaton
[shal be carried out with uniform ilumination et the surface othe Floor Drain of
Floor Dran found free from visible
tothe waste outlet. The wasta out fiting shall be recessed typo.
|900 lux and with the Drain positioned so that it is between the light source and one
louserver.
[GL7a~ Waste Oulet Foor Brain baw shall be designed constructed wit & fal Sener
CHECK UST
Satin
CHECKED & APPROVED BY
DILIP SINGH
DESIGNATION
+ QUALITY & PRODUCTION ENGINEER
DATE 2603.22SLA MILL TEST CERTIFICATE Tindal Stainless Limited.
JS a (ONSPECTION CERTIFICATE) st Jipur Odisha
aatrseaenvest In Accordance with EN 102042004 Type 31
cUERTAN=
Jcustomen MAGNA MEALS [CHRTIRCATE NO. JSL-TOLIQA2I2E-22/00WUI LOTS
Jeu MMU Dare sI1.012022 VEMICLENO. sq004374
P00, ‘O41 Maga FO DATE:14102021 REGMTCNs. ——-SLARDIQAANL- OMIT
Jcroutesricnemee Acts OAPO apse SALES ORDERNO, eoi2ei9
ursorroniviny 0, AS00374 NET WHOM) 6202
HM aHBSEC. PART A SOE
wo ose
voornon 2s tenons 100
G6 OS 171 — 00
D-NATERALHASHEEN SL
roe ns A041 101K) & COLD ROLLED FISHES QE, 20,28 BA, HOA IE)
2. MArEIA 30 MQAND OYERINTICESISS AND OVEE 29 B88 WIDTH/PR ASW ASME STANDARD) THICKNESS MMOROVER(AS PREINSTANDARD)
et MATEUAL UNDER SDN IN THRCRNES AND 6 MM AND OYERIN MDT (AS PER ASTMASHE STANDARD) ATHECHNESS LESS THAN MMIAS FR EN SANDRO)
con: SICAL DESCERTON- LENGTH MENTIONED ASCO
TT RT aT z