Professional Documents
Culture Documents
Space Heater
Space Heater
Its built-
in features and routing capabilities allow it to be used in a number of ways. The Heat setting (plate
voltage for the tube) as well as the position of the Drive and Level controls will all have an impact on
the specifications as we have shown here. The Space Heater can run clean, or run dirty.
Number of channels: 8
Input Impedance: Bypasses: 50kΩ in parallel with your load device | Active: 100kΩ
Noise Floor: @ Max Gain: -64dBu @ 140V, -66dBu @ 70V, -70dBu @ 35V
Features
LPF
General
Power: External switching type 100V – 240V AC, 1600mA output with 5 pin XLR
Conditions: For use in dry locations only between 5°C and 40°C