Professional Documents
Culture Documents
Hand-Tools
Air Drill
Air Drill
• For drilling purposes
• Drill equipped with chuck is for smaller sized drill
• Larger sized drill are equipped with tapered shank
Safety
• Use safety goggles, hand gloves and dust mask
• Ensure air hose connections are leak free and whip checked
• When bayonet coupling is in use, safety pin must be installed
• When quick-release fitting is used, make sure it is properly clicked on and locked
• Ensure the air is turned off when installing/removing drill bit
• Ensure the components to be drilled are properly secured
Inspection required
• Check air supply is free from water before connecting to the air drill
• Check air hose and fittings for leaks after turning on air supply
Air Impact Wrench
Safety
• Use safety goggles and hand gloves
• Ensure air hose connections are leak free and whip checked
• When bayonet coupling is in use, safety pin must be installed
• When quick-release fitting is used, make sure it is properly clicked on and locked
• Ensure the air is turned off when installing/removing socket
• Use the correct size of socket.
• Ensure to hold the impact wrench tight to avoid swing during the start of the impact wrench
Inspection required
• Check air supply is free from water before connecting to the air impact wrench
• Check air hose and fittings for leaks after turning on air supply
Air Impact Wrench (lightweight)
Safety
• Use safety goggles and hand gloves
• Ensure air hose connections are leak free and whip checked
• When bayonet coupling is in use, safety pin must be installed
• When quick-release fitting is used, make sure it is properly clicked on and locked
• Ensure the air is turned off when installing/removing socket
• Use the correct size of socket.
Inspection required
• Check air supply is free from water before connecting to the air impact wrench
• Check air hose and fittings for leaks after turning on air supply
Angle Air Grinder
Safety
• Use face shield, dust mask, apron, hand gloves and safety barrier
• Ensure air hose connections are leak free and whip checked
• When bayonet coupling is in use, safety pin must be installed
• When quick-release fitting is used, make sure it is properly clicked on and locked
• Ensure to tightly locked the grinding disc
• Ensure the disc is in good condition.
Inspection required
• Check air supply is free from water before connecting to the air grinder
• Check air hose and fittings for leaks after turning on air supply
Straight Air Grinder
Safety
• Use face shield, dust mask, apron, hand gloves and safety barrier
• Ensure air hose connections are leak free and whip checked
• When bayonet coupling is in use, safety pin must be installed
• When quick-release fitting is used, make sure it is properly clicked on and locked
• Ensure to tightly locked the grinding bits
• Ensure the disc is in good condition.
Inspection required
• Check air supply is free from water before connecting to the air grinder
• Check air hose and fittings for leaks after turning on air supply
Needle Scaler
Needle scaler
• Used to remove coating and rust from the machine component
• Used for descaling machine part with rough casting surface
Safety
• Use face shield, dust mask, apron, hand gloves and safety barrier
• Ensure air hose connections are leak free and whip checked
• When bayonet coupling is in use, safety pin must be installed
• When quick-release fitting is used, make sure it is properly clicked on and locked
Inspection required
• Check air supply is free from water before connecting to the needle scaler
• Check air hose and fittings for leaks after turning on air supply
Pencil Grinder
Pencil Grinder
• Used for grinding and polishing
• Used for removing high spots and rounding off sharp edges
Safety
• Use face shield, dust mask, apron, hand gloves and safety barrier
• Ensure air hose connections are leak free and whip checked
• When bayonet coupling is in use, safety pin must be installed
• When quick-release fitting is used, make sure it is properly clicked on and locked
Inspection required
• Check air supply is free from water before connecting to the pencil grinder
• Check air hose and fittings for leaks after turning on air supply
Rotary Sand Paper
Safety
• Use face shield, dust mask, apron, hand gloves and safety barrier
• Ensure air hose connections are leak free and whip checked
• When bayonet coupling is in use, safety pin must be installed
• When quick-release fitting is used, make sure it is properly clicked on and locked
Inspection required
• Check air supply is free from water before connecting to the pencil grinder
• Check air hose and fittings for leaks after turning on air supply
Pneumatic Gasket Cutter
Safety
• Use safety goggles and hand gloves
• Ensure air hose connections are leak free and whip checked
• When bayonet coupling is in use, safety pin must be installed
• When quick-release fitting is used, make sure it is properly clicked on and locked
Inspection required
• Check air supply is free from water before connecting to the pneumatic gasket cutter
• Check air hose and fittings for leaks after turning on air supply
• Check cutting blade are not cracked and blunt
Air Pistol/Gun
Air Pistol/Gun
• Used to produce sharp and focused air jet for cleaning purposes
Safety
• Use safety goggles, dust mask and hand gloves
• Ensure air hose connections are leak free and whip checked
• When bayonet coupling is in use, safety pin must be installed
• When quick-release fitting is used, make sure it is properly clicked on and locked
• Affected area during jetting to be barrier off
Inspection required
• Check air supply is free from water before connecting to the air pistol/gun
• Check air hose and fittings for leaks after turning on air supply