You are on page 1of 2

FIRST PERIODICAL TEST IN GRADE 9 ICT

DIRECTION: CHOOSE THE CORRECT ANSWER IN EACH ITEM


1. It refers to the legislation, policies, procedures and activities that aim to protect the health, safety and welfare of all people at the workplace.
a. OHS b. OSH c. CHS d. CSS
2. It is a planned system of working to prevent illness and injury where you work by recognizing and identifying hazards and risks.
a. OHS b. OSH c. CHS d. CSS
3. Each work area has a designated warden, they are recognized by the wearing of a red hard hat.
a. Contractor b. Bomb Squad c. Police d. Fire Warden
4. In an instance of workplace accidents, fire and other emergencies, these measures are executed.
a. Precautionary Measures c. Incident Report Form
b. Contingency Measures d. Emergency Response
5. It is the sum of all the components (hardware and software) that makes up a fully functional computer.
a. System unit b. Computer system c. Monitor d. Motherboard
6. These are used to input data into the computer system.
a. System unit b. Hardware c. Input Hardware d. Software
7. It is where the computer system stores data permanently for future use such as the Hard disk (HDD), Solid State Drives (SSD), Flash Drives
and CD/DVD.
a. Secondary Storage Hardware c. Primary Storage Hardware
b. Flash Drives d. Memory Card
8. It is the combination of Central Processing Unit (CPU)and the primary memory which is known as the Random-Access Memory (RAM).
a. Storage Hardware c. Processing Hardware
b. Memory Hardware d. Processing and Memory Hardware
9. It is an electronic device that not only stores data but also processes and manipulates data to carry out functions
a. Secondary Storage Hardware c. Primary Storage Hardware
b. Computer d. Memory Card
10. I encoded a file and saved it into “drive C:/”. I will use this type of software to interpret computer language and translate it into machine
language.
a. Storage Hardware c. Processing Hardware
b. Language Processors d. Memory Hardware
11. In the Block Diagram of the Computer System, where does data go to enable us see the result of our command?
a. Input b. Output c. System d. Memory
12. Windows OS (Windows 7, Windows 10 Windows Server and the incoming Windows 11), Mac OS (OS X El Capitan and macOS Mojave)
and Linux OS (Debian, Ubuntu, Gentoo) are examples of…
a. Operating System c. System Software
b. Application Software d. Utility Software
13. Also called optical disc is a nonmagnetic, polished metal disk used to store digital information.
a. Hard drive b. Floppy diskette c. LS-120 d. Compact disc (CD)
14. The main, and usually largest, data storage device in a computer.
a. Hard drive b. Floppy diskette c. LS-120 d. Compact disc (CD)
15. Similar to a laser printer, but uses liquid crystals or light- emitting diodes rather than a laser to produce an image on the drum.
a. Laser Printer b. Line Printer c. LCD and LED Printer d. Thermal Printer
16. Contains a chain of characters or pins that print an entire line at one time. Line printers are very fast, but produce low-quality print.
a. Laser Printer b. Line Printer c. LCD and LED Printer d. Thermal Printer
17. Which device are you going to use to read text or illustrations printed on paper and translates the information into a form the computer can
use?
a. Scanning Devices b. Reading device c. Printing Device d. Thermal device
18. Which type of device can displays information in visual form, using text and graphics?
a. Computer Display Monitor c. Computer Graphics Monitor
b. Computer Camera Monitor d. Computer audio Monitor
19. You are the owner of a department store and decided to buy an inexpensive printer that works by pushing heated pins against heat-sensitive
paper. Which printer suit your needs?
a. Laser Printer b. Line Printer c. LCD and LED Printer d. Thermal Printer
20. It is an electronic device that amplifies the signal it receives.
a. Repeater b. Modem c. Hub d. LAN
21. A device that enables a computer to connect to the network.
a. LAN b. NIC c. WAN d. MAN
22. It is the simplest in the family of network connecting devices because it connects LAN components with identical protocols.
a. Switch b. NIC c. Hub d. LAN
23. This network device maintains limited routing information about nodes in the internal network, and it allows connections to systems like
hubs or routers.
a. Switch b. NIC c. Hub d. LAN
24. Apply this network to large organizations to connect their various sites, remote employees, suppliers, and data centers so they can run
applications and access necessary data.
a. Switch b. NIC c. WAN d. LAN
25. Apply this network to a small closed area to apply communication between computers
a. Switch b. NIC c. WAN d. LAN
26. A gateway is essentially a system used to communicate between networks with different protocols and are responsible…
a. for converting one protocol into another. b. for converting analog protocol into digital.
c. for converting digital protocol into analog. d. for not converting everything
27. If you will divide larger networks into smaller sections. Which of the following device are you going to use?
a. Switch b. NIC c. Hub d. Bridge
28. A piece of software that installs the operating system on a computer's hard disk.
a. Software Apps b. OS Software c. Drivers d. BIOS
29. It is one of the commonly used boot drives to install and load the operating system into the computer.
a. Flash drive b. Floppy disk c. Blu-ray disk d. SD card
30. It is used for holding, bending and stretching the lead of electronics component or connecting wire.
a. Flat Screw Driver b. Long Nose Flier c. Allen Wrench d. Crimping Tool
31. It is used to join two or more metal conductors with the support of soldering lead melted around it.
a. Soldering Iron b. Desoldering Iron c. Switch d. Hub
32. Use this to join two pieces of metal by deforming one or both of them in a way that causes them to hold each other.
a. Flat Screw Driver b. Long Nose Flier c. Allen Wrench d. Crimping Tool
33. During network cable installation, we need to test the continuity of the UTP itself, to do this, we need a…
a. Flat Screw Driver b. LAN Tester c. Allen Wrench d. Crimping Tool
34. If you attached an RJ45 Connector to the both end of a UTP cable, what are you creating?
a. Flat Screw Driver b. LAN Cable c. Allen Wrench d. Crimping Tool
35. A garment worn over the front of the body as a protection for one’s cloth.
a. Rubber Sole b. Goggles c. Apron d. Gloves
36. A covering material with a separate sheath for each finger used for hand protection.
a. Rubber Sole b. Goggles c. Apron d. Gloves
37. It refers to protective clothing, helmets, goggles, or other gear designed to protect the wearer’s body or clothing from injury by electrical
hazards, heat chemicals, and infection, for job-related occupational safety and health purposes.
a. PPE b. APP c. EPP d. iron man suite
38. Humans can’t feel a static shock until it is several thousand volts strong, but it takes less than 30 volts to fry these sensitive things.
a. Monitor b. keyboard c. computer component d. none of these
39. Always use an anti-static wrist strap when working on a computer, except when working on…
a. Monitor b. keyboard c. computer component d. none of these
40. To prevent the inhaling or absorbing dust and other chemicals, we should use..
a. goggles b. face mask c. apron d. gloves
41. Face Mask, Gloves, Goggles, Apron, Rubber soles, are examples of.
a. PPE b. APP c. EPP d. iron man suite
42. Sadam is disassembling a system unit and suddenly realized that he is not wearing anti-static writ strap. What solution is the best thing to do?
a. Get a wire and wrap it in his wrist to replicate an anti-static device.
b. Find a metal object which is attached to the ground and touch it to discharge the ESD.
c. Just continue because the teacher is busy looking at other students.
d. None of the above.
43. The chance or probability that a person will be harmed or experience an adverse health effect if exposed to a hazard.
a. Hazard b. risk c. sign d. fate
44. Its anything that could hurt you or someone else, anything that may be dangerous.
a. Hazard b. risk c. sign d. fate
45. When you are working out how likely it is that a hazard will harm someone and how serious the harm could be. What are you doing?
a. Assess the Risk b. Spot the Hazard c. Make the Changes d. none
46. They can be classified as type of occupational hazard or environmental hazard. Like cables running across the floor.
a. Physical Hazard b. Mechanical hazard c. Chemical Hazard d. Electrical Hazard
47. These are (non-biological) substance that has the potential to cause harm to life or health.
a. Physical Hazard b. Mechanical hazard c. Chemical Hazardd. Electrical Hazard
48. You can pick up things from the floor and put them away to eliminate a trip hazard.
a. Assess the Risk b. Spot the Hazard c. Make the Changes d. none
49. The following are ways you can identify health and safety problems, except…
a. Observe your workplace c. Examine the first aid kit
b. Investigate complaints from workers d. Examine sickness figures;
50. Examples of workplace hazards include:
a. frayed electrical cords (could result in electrical shock)
b. boxes stacked precariously (they could fall on someone)
c. noisy machinery (could result in damage to your hearing)
d. all of the above

You might also like