Professional Documents
Culture Documents
Specifications:
- Multispectral Camera 1/2.8-inch CMOS, 5 MP, G/R/RE/NIR
- 43 Minute Max Flight Time
- Omnidirectional binocular vision system, with an infrared sensor at the bottom of the
aircraft
- Multispectral camera : 1/2.8-inch CMOS, effective pixels: 5 MP
- Max flight distance : 8 km
- Advanced Return to Home
- RTK Position Accuracy : Horizontal 1cm + 1ppm; Vertical 1,5cm + 1ppm
DJI Mavic 3 Multispectral
2 In the box : 80,648,649 89,520,000
Brochure Download 1x Aircraft Mavic 3 Multispectral (RTK Module and SD Card Installed)
1x Remote Controller
1x Power Cable
1x USB-C Cable
3x Propeller (Pair)
1x Charger
1x USB-C to USB-C Cable
1x Carrying Case
1x Screwdriver
1x Manual Book
Specifications:
- Capacity: 5000 mAh
- Battery Type: LiPo 4S
4 DJI - Mavic 3 Intelligent Flight Battery 3,144,144 3,490,000
In the box:
1x Mavic 3 Battery
In The Box:
5 DJI - Mavic 3 Enterprise Battery Kit 3x Mavic 3 Batteries 12,549,550 13,930,000
1x Charging Hub
Specifications:
D-RTK 2 Mobile Base Station with cm level accuracy + Tripod
DJI - D-RTK 2 High Precision GNSS
6 56,378,378 62,580,000
Mobile Station + Tripod
In the box:
1x D-RTK 2 Mobile Station and 1x Tripod
In the box :
- 1x RC Plus Remote Controller
- 1x Controller Battery
Specifications:
5,880 mAH battery with 263.2 WH.
DJI M350 - TB65 Intelligent Flight
8 In the box: 16,369,369 18,170,000
Battery
1x TB65 Battery
In the box:
1x BS65 Battery Station
Specifications:
D-RTK 2 Mobile Base Station with cm level accuracy + Tripod
DJI - D-RTK 2 High Precision GNSS
10 56,378,378 62,580,000
Mobile Station + Tripod
In the box:
1x D-RTK 2 Mobile Station and 1x Tripod
PIX4D VIDOC
The future of single point measurement with 3D scanning. Multiple options for accurate
13 Pix4D ViDoc - RTK Rover for phone point measurement. Measure obstructed points. Accurate and safe measurement 151,593,600 168,268,896
methods
PIX4Dmapper Perpetual License 2D & 3D Orthomosaic/Photogrammetry survey and mapping software - perpetual license.
14 46,573,333 51,696,400
FREE: Pix4Dmapper Essentials Online Free online PIX4Dmapper Essentials Online Course Bundle + Exam + Pix4D Certificate for 1
Course + Exam + Pix4D Certificate user (Save DR 5,000,000,-)
TerraScan UAV is known to all professionals working with LiDAR data. It is a real
multipurpose tool enabling our customers work in both producing the data and getting
deliverables for different industries. Deliverables include high quality classified point cloud
data or vector data to be used in various engineering and maintenance applications.
TerraModeler UAV you can create, edit, and visualize surface models (TIN). TerraModeler
creates surface models from points in TerraScan UAV. The software offers versatile
visualization options including colored shaded surfaces, contour lines, grids, colored
triangle nets, elevation texts, slope directions and textured surfaces (in combination with
TerraScan UAV + TerraModeler UAV +
TerraPhoto UAV). Additional functionality includes the production of contour lines, DSM
TerraMatch UAV
and DTM models, modification of the TIN, creation of profiles, calculation of volumes,
calculation of elevation or volume differences between two surface models, several
labeling options as well as other tools for design purposes. Completed with various export
16 options, TerraModeler UAV is a versatile tool for many kinds of design and modeling tasks. 114,048,000 126,593,280
Perpetual License
TerraMatch UAV
TerraMatch UAV is a lighter version of TerraMatch. It is dedicated to users that process
only point clouds collected by Unmanned Airborne Vehicles (UAVs, also called Drones).
Brochure Download
UAV systems produce relatively small point clouds from a low altitude. The system is more
unstable in the air. Often, less capable/expensive hardware is used which leads to a higher
inaccuracy level of the raw data. Therefore, the improvement of the data accuracy by
eliminating boresight misalignment and positional inaccuracies caused by a bad trajectory
solution plays an important role in the processing workflow. The UAV version of
TerraMatch is recommended to be used for processing point clouds up to a few hundred
million of points (depends also on hardware conditions). TerraMatch UAV does not have
any project capabilites. Tools can be performed on points loaded in memory but not on
project level.
TerraModeler UAV you can create, edit, and visualize surface models (TIN). TerraModeler
creates surface models from points in TerraScan UAV. The software offers versatile
visualization options including colored shaded surfaces, contour lines, grids, colored
triangle nets, elevation texts, slope directions and textured surfaces (in combination with
TerraScan UAV + TerraModeler UAV +
TerraPhoto UAV). Additional functionality includes the production of contour lines, DSM
TerraMatch UAV
and DTM models, modification of the TIN, creation of profiles, calculation of volumes,
calculation of elevation or volume differences between two surface models, several
labeling options as well as other tools for design purposes. Completed with various export
18 options, TerraModeler UAV is a versatile tool for many kinds of design and modeling tasks. 42,768,000 47,472,480
1 Year Subscription
TerraMatch UAV
TerraMatch UAV is a lighter version of TerraMatch. It is dedicated to users that process
only point clouds collected by Unmanned Airborne Vehicles (UAVs, also called Drones).
Brochure Download
UAV systems produce relatively small point clouds from a low altitude. The system is more
unstable in the air. Often, less capable/expensive hardware is used which leads to a higher
inaccuracy level of the raw data. Therefore, the improvement of the data accuracy by
eliminating boresight misalignment and positional inaccuracies caused by a bad trajectory
solution plays an important role in the processing workflow. The UAV version of
TerraMatch is recommended to be used for processing point clouds up to a few hundred
million of points (depends also on hardware conditions). TerraMatch UAV does not have
any project capabilites. Tools can be performed on points loaded in memory but not on
project level.
EMLID GNSS BASE STATION RECEIVER
Multi-band RTK GNSS receiver with centimeter precision
- GNSS: GPS/QZSS, GLONASS; L1C/A, L2C, L1OF, L2OF,B1I; BeiDou, and Galileo; B2I, E1B/C, E
- LoRa 868/915 MHz, range up to 8 km
- 18 hrs as an RTK rover with tilt, 22 hrs of logging
- Li-Ion 5200 mAh, 7.2 V37.44 Wh
Emlid Reach RS3 Survey Kit
In the box:
19 - 2x Reach RS3 83,271,914 92,431,825
- 2x Carrying case with a strap
Brochure Download - 2x Radio antenna
- 2x USB Type-C cable
- 2x Extention Pole Emlid
- 1x Tripod (Local)
- 1x Tribrach (Local)
- 1x Survey Pole (Local)
For more information about Halo Robotics training programs, please contact: enterprise@halorobotics.com