You are on page 1of 6

Gigabit Interface Converter Transceiver

SFP LX SM 1310

Features:
• Up to 1.25 Gb/s NRZ
• Single +3.3V Power Supply
• Hot-Pluggable SFP footprint
• Metal enclosure, for lower EMI
• Duplex LC connector
• TTL signal detect indicator
• 1310nm Fabry-Perot laser transmitter

Applications:
• 1.25Gb/s 1000Base-LX Ethernet
• Gigabit Fibre Channel
• High Speed I/O for File Servers

MemoryDealers LX/LH SFP family is a high performance and cost effective transceiver for serial
optical data communication applications. The interface converters meet the SFP Multi-Source
Agreement (MSA) specifications. This module is designed for single mode fiber operation at the
wavelength of 1310nm /1550nm or multi-mode fiber operation at the wavelength of 850nm / 1310nm.
The transmitter section incorporates an advance FP / DFB laser for single-mode or VCSEL for
multi-mode, with temperature compensation and automatic power control circuit (APC). The receiver
section incorporates an efficient InGaAs/InP PIN photodiode, with AGC for wide dynamic range.

The family is a duplex LC connector transceiver, designed for use in Gigabit Fiber Channel and
Gigabit Ethernet and to provide an IEEE-802.3z compliant link at 1.25Gbps applications. The
transceiver are hot-pluggable, the characterization is performed in accordance with Bellcore
specification TA-NWT-000983. All of them are housed in a stainless package and the combination
produces a component of high reliability.

Specifications:

I. Absolute Maximum Ratings


Parameter Symbol Min Typ Max Units Notes/Conditions
Maximum Vmax -0.5 4.5 V
Supply
Voltage
Storage Ts -40 85 °C
Temperature
Operating Top 0 70 °C Case Temperature
Temp
Eye Safety -- CDRH and IEC-825 Class 1 Laser Product
Gigabit Interface Converter Transceiver
SFP LX SM 1310

II. Electrical Characteristics


Parameter Symbol Min Typ Max. Units Notes
Supply Voltage Vcc 3.10 3.50 V
Supply Current Icc 250 mA
Input Impedance Rin 75 Ohm
Transmitter ±TX_dat 650 2000 mVpp peak to peak
Differential Input Volt
Receiver Differential ±RX_dat 0.4 2000 mV Peak to peak
Output Vlot
TX_Disable Vtd 0 0.8 V
TX_Enable Vte 2.0 Vcc V
RX_LOS fault Vlosf 0 0.8 V Loss signal is LVTTL
RX_LOS Normal Vlosn 2 Vcc V Loss signal is LVTTL

III. Transmitter Optical Characteristics (Top=0 to 70 °C, Vcc=3.10 to 3.50 Volts)


Parameter Symbol Min Typ Max Units Notes/Conditions
Data Rate BR 1250 Mb/sec
Optical λ 1270 1310 1355 nm
Wavelength
Spectral Width Δλ 2.8 nm RMS
Optical Output Pout -9.5 -3.0 dBm 1000BASE-LX
Power
Extinction Ratio Er 10 dB
Max. Pout Poff -35 dBm
TX-disable
Asserted
Output Eye Compliant with IEEE802.3z
Diagram

IV. Receiver Optical Characteristics (Top=0 to 70 °C, Vcc=3.10 to 3.50 Volts)


Parameter Symbol Min Typ Max Units Notes/Conditions
Date Rate BR 1250 Mb/sec
Optical Center λc 1100 1310 1600 nm Single-mode
Wavelength
Maximum Input Pmax -3 0 dBm
Power
Average Rx Psen -20 -22 dBm PRBS 27-1 at 10-12 BER
Sensitivity (SM)
Signal Detect PH-L -35 dBm
Threshold PL-H -26 dBm
Gigabit Interface Converter Transceiver
SFP LX SM 1310

V. Time Characteristics
Parameter Symbol Min Typ Max Units Notes/Conditions
Transmitter Rise/Fall Time tr/tf 260 ps Unfiltered, 20-80%
TX_disable Assert Time t_off 3 10 µsec
TX_disable Negative Time t_on 0.5 1 ms
Time initialize t_int 30 300 ms Include reset of TX_fault
TX_fault t_fault 20 100 µsec From fault to assertion
TX_disable t_reset 10 µsec Time to start reset
Receiver Loss of Signal Ta, 100 µsec Off to On
Asset Time RX-loss
Receiver Loss of Signal Td, 100 µsec On to Off
Asset Time RX_loss

VI. Block Diagram of Transceiver

+Tx_ DAT
LD
-Tx_ DAT Driver LD

Tx_ Disable
Tx_ Fault
Optical Duplex LC
MOD_DEF(0 Sub-assembl Receptacle
MOD_DEF(1
MOD_DEF(2 MOD DE

+Rx_ DAT
Post- Pre-
-Rx_ DAT Amp Amp
Rx
Gigabit Interface Converter Transceiver
SFP LX SM 1310

VII. Pin Assignment


VeeT 20
1 VeeT
TD- 19
2 TXFault
TD+ 18
3 TX Disable
VeeT 17
4 MOD-DEF(2) Towards
Towards ` VccT 16
5 ASIC
Bezel MOD-DEF(1)
15
VccR
6 MOD-DEF(0)
VeeR
14
7
Rate Select 13
8 RD+
Los 12
9 RD-
VeeR 11
10 VeeR
VeeR

Pin out of Connector Block on Host Board


Pin Description:
Plug
Pin Signal Name Description Notes
Seq.
1 VEET Transmitter Ground 1
Logic high, open collector.
2 TFAULT Transmitter Fault Indication 3 Compatible , 4.7K to 10K Ohm pull
up to VDDT on host
3 TDIS Transmitter Disable 3 Module disables on high or open
4.7K to 10K Ohm pull up to VDDT on
4 MOD_DEF(2) SDA Serial Data Signal 3
host
4.7K to 10K Ohm pull up to VDDT on
5 MOD_DEF(1) SCL Serial Clock Signal 3
host
6 MOD_DEF(0) Module Definition 0 3 TTL low
Select between full or reduced
7 Rate Select No connection required 3
receiver bandwidth
Logic high, Open collector
Loss of Signal indication, Logic 0
8 LOS 3 compatible 4.7K to 10K Ohm pull up
indicate normal operation
to VDDT on host.
9 VEER Receiver ground 1
10 VEER Receiver ground 1
11 VEER Receiver ground 1
12 RD- Receiver Inverted DATA out 3 Differential PECL, at AC couple
13 RD+ Receiver Non-inverted DATA out 3 AC Coupled
14 VEER Receiver ground 1 Differential PECL, at AC couple
15 VCCR Receiver Power Supply 2
16 VCCT Transmitter Power Supply 2
17 VEET Transmitter Ground 1
18 TD+ Transmitter DATA in 3 Differential PECL, AC couple
19 TD- Transmitter Inverted DATA in. 3 Differential PECL, AC couple
20 VEET Transmitter Ground 1
Gigabit Interface Converter Transceiver
SFP LX SM 1310

VIII. Recommended Circuit

4.7K 4.7K 4.7K 4.7K


LOS
8 LOS

1 VeeT
TTL LOW
9 VeeR

Serial Clocks Signal 6 MOD_DEF(0)

5 MOD_DEF(1)
Serial Data Signal
4 MOD_DEF(2)
TX_DISABLE
3 TX_DSABLE

10 VeeR

11 VeeR

TX FAULT
2 TX_FAULT

14 VeeR
Inv. Received Data Out ZO=75-OHM
12 RD-
Received Data Out ZO=75-OHM
13 RD+
Undefined
7 Rate Select

15 VccR

16 VccT
Transmitter Data In ZO=75-OHM 17 VeeT
Inv. Transmitter Data In ZO=75-OHM
18 TD+
VCC
4.7μH 19 TD-

20 VeeT
10μF 4.7μH 100 nF 100 nF

100 nF GND
GND
GND 100 nF GND
GND GND
Gigabit Interface Converter Transceiver
SFP LX SM 1310

IX. Mechanical Dimensions

X. For more information


Memorydealers.com, Inc.
3350 Scott Blvd. Building 32
Santa Clara, CA 95054
Toll Free: 1.877.486.5650
Phone: 1.408.486.5650
Fax: 1.408.486.5653
Email: sales@memorydealers.com

You might also like