Specify next point or [Undo]: Specify next point or [Undo]: Specify first extension line origin or
Specify next point or [Undo]: *Cancel* <select object>: *Cancel*
*Cancel* Command: Command: Command: Command: _.erase 1 found Command: _dimangular Command: _.erase 1 found Command: Select arc, circle, line, or <specify Command: Command: _.erase 1 found vertex>: Command: _.erase 1 found Command: Select second line: Command: Command: _.erase 1 found Specify dimension arc line location Command: _.erase 1 found Command: or [Mtext/Text/Angle/Quadrant]: Command: Command: _.erase 1 found Dimension text = 120 Command: _.erase 1 found Command: Command: Command: Command: Command: Command: Command: _line Command: Command: _line Specify first point: Command: Specify first point: Specify next point or [Undo]: Command: _dimangular Specify next point or [Undo]: Specify next point or [Undo]: Select arc, circle, line, or <specify *Cancel* *Cancel* vertex>: Command: Command: Select second line: Command: Command: Specify dimension arc line location Command: _line Command: or [Mtext/Text/Angle/Quadrant]: Specify first point: Command: _line Dimension text = 135 Specify next point or [Undo]: Specify first point: Command: Specify next point or [Undo]: 70 Specify next point or [Undo]: 30 Command: _.erase 1 found Specify next point or [Close/Undo]: Specify next point or [Undo]: 15 Command: Specify next point or [Close/Undo]: Specify next point or [Close/Undo]: Command: *Cancel* Specify next point or [Close/Undo]: Command: _dimangular Command: *Cancel* Select arc, circle, line, or <specify Command: _.erase 1 found Command: vertex>: Command: Command: Select second line: Command: _.erase 1 found Command: _dimlinear Select second line: Crossing Lasso Press Spacebar to Specify first extension line origin or Specify dimension arc line location cycle options <select object>: or [Mtext/Text/Angle/Quadrant]: Command: _.erase 11 found Specify second extension line origin: Dimension text = 120 Crossing Lasso Press Spacebar to Specify dimension line location or Command: cycle options [Mtext/Text/Angle/Horizontal/ Command: _.erase 1 found Command: _.erase 1 found Vertical/Rotated]: *Cancel* Command: Command: Command: Command: Command: Command: Command: _dimangular Command: _line Command: _dimaligned Select arc, circle, line, or <specify Specify first point: Specify first extension line origin or vertex>: Specify next point or [Undo]: 30 <select object>: Select second line: Specify next point or [Undo]: 18 Specify second extension line origin: Specify dimension arc line location Specify next point or [Close/Undo]: Specify dimension line location or or [Mtext/Text/Angle/Quadrant]: 10 [Mtext/Text/Angle]: Dimension text = 120 Specify next point or [Close/Undo]: Dimension text = 15 Command: <Ortho off> Command: Command: Specify next point or [Close/Undo]: Command: Command: _dimangular 20 Command: _dimaligned Select arc, circle, line, or <specify Specify next point or [Close/Undo]: Specify first extension line origin or vertex>: 50 <select object>: Object selected is not a line, arc or Specify next point or [Close/Undo]: Specify second extension line origin: circle. 20 Specify dimension line location or Select arc, circle, line, or <specify Specify next point or [Close/Undo]: [Mtext/Text/Angle]: vertex>: 15 Dimension text = 15 Object selected is not a line, arc or Specify next point or [Close/Undo]: Command: circle. 25 Command: Select arc, circle, line, or <specify Specify next point or [Close/Undo]: Command: _dimaligned vertex>: *Cancel* 15 Specify first extension line origin or Command: Specify next point or [Close/Undo]: <select object>: Command: *Cancel* Specify second extension line origin: Command: _dimangular Command: Specify dimension line location or Select arc, circle, line, or <specify Command: [Mtext/Text/Angle]: vertex>: *Cancel* Command: _line Dimension text = 15 Command: Specify first point: Command: Command: _.erase 1 found Specify next point or [Undo]: Command: Command: Command: _dimaligned Command: _.erase 1 found Command: Command: Command: Command: Command: Command: Command: _dimangular Command: _dimlinear Command: Select arc, circle, line, or <specify Specify first extension line origin or Command: vertex>: <select object>: ** STRETCH ** Select second line: Specify second extension line origin: Specify stretch point or [Base Specify dimension arc line location Specify dimension line location or point/Copy/Undo/eXit]: or [Mtext/Text/Angle/Quadrant]: [Mtext/Text/Angle/Horizontal/ Command: Specify opposite corner Dimension text = 120 Vertical/Rotated]: or [Fence/WPolygon/CPolygon]: Command: Dimension text = 30 Command: Command: Command: ** STRETCH ** Command: _dimangular Command: Specify stretch point or [Base Select arc, circle, line, or <specify Command: _dimlinear point/Copy/Undo/eXit]: *Cancel* vertex>: Specify first extension line origin or Command: Select second line: <select object>: Command: Specify dimension arc line location Specify second extension line origin: Command: _.undo Current settings: or [Mtext/Text/Angle/Quadrant]: Specify dimension line location or Auto = On, Control = All, Combine = Dimension text = 45 [Mtext/Text/Angle/Horizontal/ Yes, Layer = Yes Command: Vertical/Rotated]: Enter the number of operations to Command: _.erase 1 found Dimension text = 70 undo or Command: Command: [Auto/Control/BEgin/End/Mark/Bac Command: Command: k] <1>: 1 Grip Edit Command: _dimangular Command: _dimlinear Command: Select arc, circle, line, or <specify Specify first extension line origin or Command: vertex>: <select object>: Command: _.undo Current settings: Select second line: Specify second extension line origin: Auto = On, Control = All, Combine = Specify dimension arc line location Specify dimension line location or Yes, Layer = Yes or [Mtext/Text/Angle/Quadrant]: [Mtext/Text/Angle/Horizontal/ Enter the number of operations to Dimension text = 135 Vertical/Rotated]: undo or Command: Specify opposite corner Dimension text = 18 [Auto/Control/BEgin/End/Mark/Bac or [Fence/WPolygon/CPolygon]: Command: k] <1>: 1 Grip Edit Command: _.erase 21 found Command: Command: Specify opposite corner Dimension disassociated. Command: _dimlinear or [Fence/WPolygon/CPolygon]: Command: Specify opposite corner Specify first extension line origin or Command: or [Fence/WPolygon/CPolygon]: <select object>: Command: Command: _.erase 1 found Specify second extension line origin: Command: _copyclip 20 found Command: Specify dimension line location or Command: _.erase 20 found Command: [Mtext/Text/Angle/Horizontal/ Command: Command: _dimlinear Vertical/Rotated]: Command: Specify first extension line origin or Dimension text = 50 Command: _pasteclip Specify <select object>: Command: insertion point: Specify second extension line origin: Automatic save to C:\Users\CUC\ Command: Specify dimension line location or AppData\Local\Temp\AUTOCAD Command: [Mtext/Text/Angle/Horizontal/ COORDENADAS_1_4940_7b4f1f88.s Command: _.undo Current settings: Vertical/Rotated]: v$ ... Auto = On, Control = All, Combine = Dimension text = 25 Command: Yes, Layer = Yes Command: Command: Enter the number of operations to Command: Command: undo or Command: _dimlinear Command: _dimlinear [Auto/Control/BEgin/End/Mark/Bac Specify first extension line origin or Specify first extension line origin or k] <1>: 1 INTELLIZOOM INTELLIPAN <select object>: <select object>: INTELLIZOOM Specify second extension line origin: Specify second extension line origin: Command: Specify dimension line location or Specify dimension line location or Command: [Mtext/Text/Angle/Horizontal/ [Mtext/Text/Angle/Horizontal/ Command: _.undo Current settings: Vertical/Rotated]: Vertical/Rotated]: Auto = On, Control = All, Combine = Dimension text = 50 Dimension text = 45 Yes, Layer = Yes Command: Command: Specify opposite corner Enter the number of operations to Command: or [Fence/WPolygon/CPolygon]: undo or Command: _dimlinear Command: [Auto/Control/BEgin/End/Mark/Bac Specify first extension line origin or Command: k] <1>: 1 PASTECLIP GROUP <select object>: Command: _copyclip 20 found Command: Specify second extension line origin: Command: Command: Specify dimension line location or Command: Command: _pasteclip Specify [Mtext/Text/Angle/Horizontal/ Command: _pasteclip Specify insertion point: Vertical/Rotated]: insertion point: Command: Specify opposite corner Dimension text = 65 Command: or [Fence/WPolygon/CPolygon]: Command: Command: Command: _scale 20 found Specify base point: Specify scale factor or [Copy/Reference]: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Command: Command: Command: _move 20 found Specify base point or [Displacement] <Displacement>: Specify second point or <use first point as displacement>: Checking 1176 intersections... Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Command: Command: Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes, Layer = Yes Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Bac k] <1>: 1 INTELLIZOOM INTELLIPAN INTELLIPAN INTELLIZOOM INTELLIPAN INTELLIPAN INTELLIPAN INTELLIZOOM INTELLIPAN INTELLIZOOM Command: Command: Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes, Layer = Yes Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Bac k] <1>: 1 MOVE GROUP Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Command: Command: Command: _scale 20 found Specify base point: Specify scale factor or [Copy/Reference]: Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: Command: Command: Command: _copyclip 20 found Command: _.erase 20 found Command: Command: Command: _pasteclip Specify insertion point: Command: _pasteclip Specify insertion point: Command: Command: Command: _QSAVE Command: Command: Command: _QSAVE