Professional Documents
Culture Documents
Ans:
Command: RECTANGLE
Command: P
PAN
Command: *cancel*
Command:
Command: _.erase
1 found
Command: RECTANGLE
Command: P
PAN
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command: *cancel*
Command: EXT
EXTRUDE
1 found
Command: UCS
Command: RECTANGLE
Command:
Command: _.erase
1 found
Command: RECTANGLE
Command: EXT
EXTRUDE
1 found
Select entities or [MOde]:
Command: UCS
Command: RECTANGLE
Command: EXT
EXTRUDE
1 found
Command:
Command: _.erase
1 found
Command: RECTANGLE
Command: EXT
EXTRUDE
1 found
PAN
Command: *cancel*
Command: UCS
Command: P
PAN
Command: *cancel*
Command: RECTANGLE
Command: L
LINE
Command: EXT
EXTRUDE
1 found
Command: UCS
Command: RECTANGLE
Command:
Command: _.erase
1 found
Command: RECTANGLE
Command: *cancel*
Command: EXT
EXTRUDE
1 found
Command: *cancel*
Command:
Command:
Command: _shademode
Command: C:\Users\vamsi\AppData\Local\Temp\Drawing2_zws48967.zs$
Command:
_SHADEMODE
Command:
Command:
_SHADEMODE
Command:
Command:
Command: *cancel*
Command: '_matchprop
Current active settings: Color Layer Ltype Ltscale Lineweight Transparency Thickness PlotStyle Text
Dim Hatch Polyline Viewport Table
Command:
Command: _shademode
Command: COL
COLOR
Command:
Command:
Command: *cancel*
Command:
Command:
Command: _shademode
Command:
Command: _.PSELECT
Select objects:
0 found
Select objects:
1 found
Select objects:
1 found, 2 total
Select objects:
1 found, 3 total
Select objects:
1 found, 4 total
Select objects:
1 found, 5 total
Select objects:
Select objects:
Command: COL
COLOR
Command: COL
COLOR
Command:
Command:
Command:
Command:
Command:
Command:
COLOR
Command: COL
COLOR
Command:
Command:
Command: _shademode
Command: COL
COLOR
Command:
Command:
Command:
Command:
Command:
Command:
COLOR
Command:
Command:
Command:
Command: _saveas
Command:
Command:
Invalid window.
Command: *cancel*
Command:
Command: *cancel*
Command:
Command:
Command:
Command:
** STRETCH **
Command:
Command:
Command:
Command:
Command: `*cancel*
Command:
Command:
Command:
Command:
Command:
Command:
Command: C:\Users\vamsi\AppData\Local\Temp\Drawing2_zws48967.zs$
Command:
Command: *cancel*
Command: P
PAN
Command: *cancel*
Command:
PAN
Command: *cancel*
Command:
Command:
Command: _dimlinear
Command:
Command: _.erase
1 found
Command:
Command:
Command: _dimlinear
Command:
Command:
Command: _dimlinear
Command:
Command:
Command: _properties
Command: D
DIMSTYLE
Command:
Command:
Command:
Command:
Command:
Command: _ddedit
Command:
Command: _.erase
1 found
Command:
Command:
Command: _dimlinear
Command:
Command:
Command:
Command: _ddedit
Command:
Command:
Command: _dimlinear
Command:
Command:
Command:
Command: _ddedit
Command:
Command:
Command:
Command:
Command: P
PAN
Press ESC or ENTER to exit, or right-click to display shortcut menu.
Command: *cancel*
Command:
Command:
Command:
Command:
Command:
Command:
PAN
Command: *cancel*
Command:
Command:
Command: _dimlinear
Command:
Command:
_DIMLINEAR
Command: *cancel*
Command: *cancel*
Command: *cancel*
Command: *cancel*
Command: U
DIMLINEAR
Command: U
Modify Property
Command: U
DIMLINEAR
Command:
Command:
Command: _dimlinear
Command:
Command:
Command:
Command: _ddedit
Command:
Command: _.erase
1 found
Command:
Command:
Command: _dimlinear
Command:
Command:
Command:
Command: _ddedit
Current setting: Edit mode = Multiple
Command:
Command: _dimlinear
Command:
Command:
Command:
Command: _ddedit
Command:
Command: _dimlinear
Command:
Command:
Command:
Command: _ddedit
Command:
Command: _dimlinear
Command:
Command:
Command:
Command: _ddedit
Command:
Command: _dimlinear
Command:
Command:
Command: _dimlinear
Command:
Command:
Command:
Command: _ddedit
Command:
Command: _dimlinear
Command:
Command:
Command: _ddedit
Command:
Command: _dimlinear
Command:
Command:
Command: _dimlinear
Command: '_3dorbit
Command: *cancel*
Command:
Command:
Command: _dimlinear
Command:
Command:
Command: _dimlinear
Command:
Command:
Command: _dimlinear
Command:
Command:
Command: _dimlinear
Command:
Command:
Command: _dimlinear
Command:
Command:
Command: _dimlinear
Command:
Command:
Command: _dimlinear
Specify the origin of first extension line or <select entity>:
Command:
Command:
Command: _dimlinear
Command:
Command: _.erase
1 found
Command:
Command:
Command: _qdim
1 found
Command:
Command:
Command: _dimaligned
Command: U
DIMALIGNED
Command:
Command:
Command: _dimlinear
Command:
Command:
Command:
_DIMLINEAR
Command:
Command:
Command:
Command: _ddedit
Command:
Command: _dimlinear
Command:
Command: _.erase
1 found
Command:
Command:
Command: _dimlinear
Command:
Command:
Command:
Command:
Command: _ddedit
Command:
Command: _.erase
1 found
Command:
Command:
Command: _dimlinear
Command:
Command:
Command:
Command: _ddedit
Command:
Command: _dimlinear
Command:
Command:
Command:
Command: _ddedit
Command:
Command: _-view
Command:
Command:
Command: _-view
Command:
Command:
Command: _-view
Command:
Command:
Command:
Command: _ddedit
Command:
Command: _-view
Command: *cancel*
Command: *cancel*
Command: *cancel*
Command:
_-VIEW
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command: _dimlinear
Command: P
PAN
Command: *cancel*
Command:
Command:
Command:
Command: _ddedit
2) question
Ans
Command:
Command: Z
ZOOM
Command: '_pan
Command: C
CIRCLE
Specify the center point of circle or [3P/2P/Ttr (tangency tangency radius)]: 0,0
Command: C
CIRCLE
Specify the center point of circle or [3P/2P/Ttr (tangency tangency radius)]: 0,0
Command: C
CIRCLE
Specify the center point of circle or [3P/2P/Ttr (tangency tangency radius)]: 0,164
Command: C
CIRCLE
Specify the center point of circle or [3P/2P/Ttr (tangency tangency radius)]: 0,164
Command: L
LINE
Command: TR
TRIM
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]: cancel
Command:
Command: _.erase
1 found
Command: ARRAY
Select objects:
1 found
Select objects:
1 found, 2 total
Select objects:
1 found, 3 total
Select objects:
1 found, 4 total
Select objects:
Command: C
CIRCLE
Specify the center point of circle or [3P/2P/Ttr (tangency tangency radius)]: 0,0
Command: TR
TRIM
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]: '_pan
>>cancel
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
None found.
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]:
Select entity to trim, or press Shift and select entity to extend, or [Edge
mode/Fence/Crossing/Projection/eRase/Undo]: cancel
Command: D
DIMSTYLE
Command:
Command:
Command: _dimlinear
Dimension text = 30
Command:
Command:
Command: _dimradius
Command:
Command:
Command: _dimdiameter
Dimension text = 60
Command:
Command:
Command: _dimdiameter
Command:
Command:
Command: _dimdiameter
Command:
Command:
Command: _dimradius
No object selected.
Dimension text = 45
Command:
Command:
Command: _dimlinear
Specify the origin of first extension line or <select entity>:
Command:
Command:
Command: _dimangular
Command:
Command:
Command: cancel
Command:
Command:
Command: _dimarc