Professional Documents
Culture Documents
System View
A. System View
Contents
A. System Overview ................................................................................................... 5
A1 System Specifications ............................................................................... 5
A2 System Components ................................................................................. 5
A2.1 Human Interface Stations (HIS) .......................................................... 5
A2.2 Engineering PC (ENG) ........................................................................ 6
A2.3 Field Control Station (FCS) ................................................................. 6
A2.4 Vnet/IP ................................................................................................ 6
A3 Graphic View ............................................................................................. 7
A3.1 Outline of the Graphic View ................................................................ 7
A3.2 Graphic View Attributes ....................................................................... 8
A3.3 Components of Graphic View ............................................................. 9
B. HIS Startup .......................................................................................................... 11
B1 Starting up HIS ........................................................................................ 11
B2 Starting up HIS Utility .............................................................................. 12
B3 Test Function ........................................................................................... 12
B3.1 Virtual test functions .......................................................................... 12
B3.2 Target test functions .......................................................................... 13
B4 HIS Startup .............................................................................................. 13
C. System Message ................................................................................................. 15
C1 System Message Banner ........................................................................ 15
D. PROCESS ALARM VIEW .................................................................................... 16
D1 Toolbar of the Process Alarm Window ..................................................... 16
D2 Message Display Area of the Process Alarm Window ............................. 17
D3 Status Bar of the Process Alarm Window ................................................ 18
E. SYSTEM ALARM VIEW ....................................................................................... 19
E1 Toolbar of the System Alarm Window ...................................................... 19
E2 Message Display Area of the System Alarm Window .............................. 20
E3 Status Bar of the Process Alarm Window ................................................ 21
F. OPERATOR GUIDE WINDOW ............................................................................ 22
F1 Toolbar of the Operator Guide Window ................................................... 22
F2 Message Display Area of the Operator Guide Window ........................... 23
F3 Status Bar of the Operator Guide Window .............................................. 23
G. MESSAGE MONITOR WINDOW ........................................................................ 25
G1 Toolbar of the Message Monitor Window ................................................ 25
G2 Message Display Area of the Message Monitor Window ........................ 26
G3 Status Bar of the Message Monitor Window............................................ 27
H. USER LOGIN FUNCTION ................................................................................... 28
I. INSTRUMENT FACEPLATE ................................................................................ 29
I1 Components of Instrument Faceplate .......................................................... 29
I2 Operations on Instrument Faceplate ............................................................. 33
I3 PROPERTIES OF A TAG .............................................................................. 35
I3.1 SECURITY LEVEL ............................................................................ 35
I3.2 ALARM HANDLING LEVEL .............................................................. 35
I4 TRACKING .................................................................................................... 37
I4.1 Output tracking.................................................................................. 37
I4.2 Input tracking .................................................................................... 38
J. Browser Bar ......................................................................................................... 39
J1 Overview Toolbox .......................................................................................... 39
J1.1 View tab ............................................................................................ 39
J1.2 Trend tab .......................................................................................... 41
J1.3 Plant hierarchy tab ............................................................................ 42
J1.4 Favorites ........................................................................................... 42
J1.5 Search .............................................................................................. 42
J2 Preset Menu Toolbox .................................................................................... 43
J3 Tool Button Toolbox ...................................................................................... 43
A. System View
J4 Name Input Toolbox ...................................................................................... 44
J5 Window History Toolbox ................................................................................ 45
K. Operation Keyboard............................................................................................. 46
K1 Mode Selection Key ................................................................................ 46
K2 Function Keys ......................................................................................... 46
K2.1 Commands Assignable to Function Keys .......................................... 47
K2.2 LED Flashing Conditions .................................................................. 48
K2.3 Authority to Change Function Key Assignments ............................... 48
K3 One-Touch Keys on Operation Keyboard ................................................ 49
K3.1 Window Calling Keys ........................................................................ 49
K3.2 Operation Control Keys ..................................................................... 50
K3.3 Other Keys ........................................................................................ 50
L. WINDOW SIZE .................................................................................................... 52
L1 Operation Screen Mode .......................................................................... 52
L1.1 Types of the Operation Screen Mode ............................................... 52
L2 Display Size of Operation and Monitoring Windows ................................ 53
L2.1 Relationship between the Display Sizes of the Operation and
Monitoring Windows and Operation Screen Modes ...................................... 53
M. TREND FUNCTION....................................................................................... 56
M1 Structure of Trend Recording .................................................................. 56
M2 Utilizing Trend Data ................................................................................. 56
M3 Types of Trend Data Acquisition .............................................................. 57
M3.1 Continuous-Rotary Type ................................................................... 57
M3.2 Batch-Stop Type ............................................................................... 57
M3.3 Batch-Rotary Type ............................................................................ 57
M3.4 Other-Station-Reference Type .......................................................... 58
M4 Sampling Period and Recording Time Span ............................................ 58
M5 Trend View .............................................................................................. 59
M5.1 Data Displayed in Trend View ........................................................... 59
M5.2 Components of Trend View .............................................................. 59
M6 Trend Point View ..................................................................................... 63
M6.1 Calling up a Trend Point View ........................................................... 63
M6.2 Calling up Hierarchy Windows of Trend Point View .......................... 64
M7 Clipboard Copy ....................................................................................... 64
N. TUNING VIEW ..................................................................................................... 66
N1 Outline of the Tuning View ...................................................................... 66
N2 Components of Tuning View ................................................................... 66
N2.1 Toolbar of Tuning View ...................................................................... 66
N2.2 Parameter Display Area of the Tuning View ...................................... 68
N2.3 Tuning Trend Display Area of Tuning View ....................................... 69
N2.4 Instrument Faceplate of the Tuning View .......................................... 69
N2.5 Status Bar of the Tuning View ........................................................... 69
N3 Logic Chart View ..................................................................................... 70
N3.1 Toolbar of the Logic Chart View ........................................................ 70
N3.2 Logic Chart Display Area of the Logic Chart View ............................. 71
N4 Sequence Table View .............................................................................. 71
N4.1 Toolbar of the Sequence Table View ................................................. 72
N4.2 Sequence Table Display Area ........................................................... 73
O. PROCESS AND HISTORICAL REPORT ............................................................. 75
O1 PROCESS REPORT WINDOW .............................................................. 75
O1.1 Toolbar of the Process Report View .................................................. 75
O1.2 Status Bar of the Process Report View ............................................. 76
O1.1 Tag Report Search and Display ........................................................ 76
O1.2 I/O Report Search and Display ......................................................... 78
O2 Historical Message Report Window ........................................................ 79
O2.1 Menu Bar in the Historical Message Report Window ........................ 79
A. System View
O2.2 Toolbar of the Historical Message Report Window............................ 80
O2.3 Status Bar of the Historical Message Report Window ....................... 81
O2.4 Searching for a Historical Message .................................................. 81
P. SYSTEM STATUS OVERVIEW WINDOW .......................................................... 86
P1 Components of System Status Overview ................................................ 86
P1.1 Toolbar of the System Status Overview ............................................ 86
P1.2 Status Display Area of System Status Overview ............................... 87
P2 HIS Setup Window .................................................................................. 88
P2.1 Call HIS Setup Window ..................................................................... 88
P2.2 Station Tab ........................................................................................ 89
P2.3 Printer Tab......................................................................................... 90
P2.4 Buzzer Tab ........................................................................................ 92
P2.5 Display Tab ....................................................................................... 93
P2.6 Window Switching Tab ...................................................................... 94
P2.7 Alarm Tab .......................................................................................... 95
P2.8 Preset Menu Tab ............................................................................... 96
P2.9 Equalize Tab ..................................................................................... 97
P2.10 Function Keys Tab ............................................................................ 98
P2.11 Operation Mark Tab .......................................................................... 99
P2.12 Multimedia Tab .................................................................................. 99
P2.13 Browser Bar Tab ............................................................................. 100
P2.14 Trend Tab ........................................................................................ 101
P2.15 Long-Term Tab ................................................................................ 102
P2.16 External Recorder Tab .................................................................... 103
P2.17 OPC Tab ......................................................................................... 104
P2.18 Report Tab ...................................................................................... 104
P2.19 Process Management Tab .............................................................. 105
P2.20 Multiple-Monitor Tab ........................................................................ 106
Q. FFCS-L Status Display View .............................................................................. 107
Q1 Elements of the FFCS Status Display View ........................................... 107
Q2 FFCS Node Status Display Dialog Box ................................................. 110
Q3 Adjust Time Dialog Box ......................................................................... 112
A. System View
A. System Overview
A1 System Specifications
A2 System Components
The HIS is mainly used for operation and monitoring – it displays process variables, control
parameters, and alarms necessary for users to quickly grasp the operating status of the plant.
It also incorporates open interfaces so that supervisory computers can access trend data,
messages, and process data.
Hardware Requirements
Runs on a general-purpose personal computer which meets the following requirements:
CPU: Intel Core Duo 2.13GHz/Xeon Dual Core 2.0GHz
(In case of [XP, 2003 Server]:(Normal PC) Intel Pentium4 2.8GHz/(Industrial PC) Intel
Pentium-M 1.6GHz)
Main Memory: More than 2GB/(In case of [XP, 2003 Server]:More than 1GB)
Hard disk: More than 40GB (Space Disk: more than 20GB)
CRT display: SXGA(more than 1280*1024 more, True color)/WXGS (more than 1440*900 more, True
Graphic Board: Graphic memory: Min 128MB,DirectX9 with WDDM driver
Expansion slot: Uses one PCI/PCIE slot for control bus interface (VI701/2)
A. System View
Software Requirement
Support target OS below:
•Windows Vista Business Edition Service Pack 1, 2
•Windows XP Professional Service Pack 2, 3
•Windows Server 2003 Service Pack 2
•Windows Server 2003 R2 Service Pack 2
•Windows Server 2008 Standard Edition Service Pack 2
The PC with engineering functions used to perform CENTUMVP system generation and
maintenance management. Generally speaking, it’s the same as HIS but the software installed is
different.
FCS performs process control, and manages communication with subsystems such as PLCs. The
control station is used to generate the control function where the process variables are read and
control calculation is carried out in the processor cards to determine the control output to be sent to the
field.
FFCS-L field control unit is a model of CENTUMVP field control station (model name:
AFV10S/AFV10D) that applies Vnet/IP to the control bus.
Model Type
AFV10S Field Control Unit (for Vnet/IP, for FIO, 19-inch rack mountable)
AFV10D Duplexed Field Control Unit (for Vnet/IP, for FIO, 19-inch rack mountable)
Table Model Names of FFCS-L Components
Name Field control unit Duplexed field control unit
AFV10S AFV10D
Power supply module (100-120 V AC) PW481 1 or 2ps PW481 2ps
Power supply module (220-240 V AC) PW482 1 or 2ps PW482 2ps
Power supply module (24 V DC) PW484 1 or 2ps PW484 2ps
Processor module CP451 1ps CP451 2ps
External interface unit 1ps 1ps
ESB bus coupler module EC401 1 or 2ps EC401 2ps
ESB bus interface module (*1) SB401 1 or 2ps SB401 2ps
ER bus interface master module (*2) EB401 1 or 2ps EB401 2ps
ER bus interface slave module (*3) EB501 1 or 2ps EB501 2ps
*1: Installed in ESB bus node unit (local node)
*2: Installed in ESB bus node unit (local node) or field control unit
*3: Installed in ER bus node unit (remote node)
A2.4 Vnet/IP
The “Vnet” part represents Vnet compatibility and the “IP” indicates an internet protocol for
general-purpose communication. This new control network incorporates general communication
function without losing highly reliable, real-time, and stable communication. The Vnet/IP is a 1-Gbps
control network that is functionally compatible with existing CENTUMVP control network (Vnet).
A. System View
A3 Graphic View
The Graphic Views may be attributed into three categories: graphic attribute, overview attribute and
control attribute.
Graphic View with Graphic Attribute
A Graphic View with graphic attribute may be called up from the graphic button or the graphic key on
the operation keyboard. The alarm status originated in the Graphic View with graphic attribute is
monitored in View tab of Overview toolbox of Browser bar or in Overview. When an alarm occurs in the
Graphic View, the display color of the icon for the View appearing in the View tab of Overview toolbox
of Browser bar or the Overview changes, allowing the operator to visually figure out from which View
the alarm is generated.
This button calls up the dialog box for assigning instrument faceplate.
This button can only be used when an instrument faceplate is assigned to the Graphic view.
The assignment of the instrument faceplate may be modified temporarily in the instrument Faceplate
Assignment dialog box. However, even if the assignment of the instrument faceplate is modified, the
size of the displayed instrument faceplate will remain unchanged. The instrument faceplate assignment
defined here will be the definition specific to the HIS for which the assignment is changed. If the
graphic function is downloaded by the builders, this instrument assignment will become invalid. The
contents defined by the Graphic Builder will take priority.
A. System View
B. HIS Startup
It is necessary to start up the HIS operation and monitoring functions before commencing the plant
operation and monitoring.
B1 Starting up HIS
B3 Test Function
The test functions allow combinations of monitoring/operation and control functions to be tested before
being put into operation.
Virtual test uses an FCS simulator instead of an actual FCS. The FCS simulator simulates the
functions and operation of the FCS and runs under an HIS.
A. System View
B3.2 Target test functions
Target test uses an actual FCS. When there are no I/O modules and I/O test devices, an FCS input
and output can be simulated by using the I/O Disconnect and Wiring Functions.
B4 HIS Startup
Exercise Start a Virtual Test Function of Project TRAIN2 based on the following steps:
1. Click Start Programs YOKOGAWA CENTUM System View
2. In System View, select FCS0102 from TRAIN2. From the pull-down menu, choose Test
Function.
3. Select the HIS station for emulation.
A. System View
At this stage, the FCS simulation will start based on the chosen FCS and HIS station.
4. The FCS simulation box called Test Function will appear. Minimize the box without closing it.
5. Minimize the System View window and the Virtual Test Function HIS monitoring and operation
window is ready for testing.
A. System View
C. System Message
The System Message Banner is always displayed at the top of the display, and expresses the
alarm occurrence status visually. The alarm acknowledgement operation can be done promptly
when an alarm occurs.
System Message Banner is a window to show the operator whether any alarms have occurred in the
plant. It is always displayed at the top of the HIS display, indicating the alarm occurrence status.
The alarm occurrence status is shown by colors and flashing of operation buttons, and the message
display. Among the most recent process alarms and system alarms, three unacknowledged alarm
messages are displayed.
When an alarm occurs, the corresponding button flashes with the buzzer sounding.
The operator stops the buzzer, and can display the alarm view or the individual acknowledgment
window by clicking the flashing button to acknowledge the alarm.
The same operation can be done upon generation of an operator guide message.
System Message Banner will never be hidden behind other windows, so that the user does not miss a
process or system alarm even when the user is using Windows general applications.
His Isolated
A. System View
The Process Alarm window displays process alarms in the order they are generated, starting
with the most recent alarm.
A Process Alarm window displays process alarm messages and annunciator messages in the order
that the most recent message appears on the top. When a message is generated, an alarm starts to
buzz and the LED of the button in the System Message window and the key on the operation keyboard
starts to flash to notify the operator.
This button prints out all process alarm messages and annunciator messages occurred.
This button acknowledges the process alarm messages and annunciator messages.
When all the process alarms are acknowledged, the Process Alarm window call button will change
from flashing to lit. When all the alarms are deleted, the color of the button will return to the normal
display color.
While this button is pressed down, only the high priority alarms are displayed. All the
alarms are displayed when the button is released.
When this button is pressed down, the present process variable of the analog data is
displayed with the engineering unit symbol. At this point, the alarm status is also displayed. When the
button is released, these displays disappear.
The alarm message display is retained for 5 seconds without being updated. Click this
button again may restart display update.
This button calls up the Filter dialog. In the Filter dialog, the filter conditions of the
A. System View
Process Alarm window, such as displaying the alarms of a specific control station or function block,can
be specified.
This button calls up the dialog box for setting the display properties in the process alarm
view. The items of the messages to be displayed in the process alarm view are customizable
When an alarm occurs in ProSafe-RS SCS (Safety Control Station), the color of the
button changes to indicate that the alarm has become active.
Clicking this button, the alarm messages filtered by the keyword “Safety Control Station” will be
displayed. If other keywords are already set to the filter, the filter will be reverted to “Safety Control
Station.”
Laboratory D
Q2. State the two types of messages displayed in the Process Alarm Window.
Q3. How many process alarm messages (maximum) can be displayed before the oldest messages are
deleted?
A. System View
The System Alarm window is an overview window that displays the system alarm messages to
notify the user of system hardware errors (FCS down, card error, etc.) and communication
errors.
The System Alarm window displays system alarm messages in the order with the most recent ones
first. When an alarm occurs, the alarm starts to buzz, and at the same time the button in the System
Message window and the LED for the key on the operation keyboard begin to flash to notify the
operator.
A maximum of 100 alarm messages are saved. If the number of system alarms generated exceeds
100, the messages will be deleted starting from the oldest system alarm message that has been
acknowledged. When there are no acknowledged system alarm messages, the oldest messages that
are unacknowledged are deleted first.
The figure below shows the system alarm message window.
This button prints out all system alarm messages that are occurring.
System alarm messages are acknowledged with this button.. When all the system alarm
messages are acknowledged, the button for calling up the System Alarm window stops flashing.
* The alarm message acknowledgment method can be set in the HIS Setup window of the system
maintenance window.
This button calls up the Help dialog box which explains the system alarm message.
The system alarm message display is retained for 5 seconds without being updated.
Click this button again may restart display update.
This button calls up the Filter dialog. In the filter dialog, filter conditions for System Alarm
windows, such as displaying system alarm messages of a specific control station, can be specified.
This button calls up the dialog box for setting the display properties in the system alarm
message window. The items of the messages to be displayed in the System Alarm view are
customizable.
When an alarm occurs in ProSafe-RS SCS (Safety Control Station), the color of the
button changes to indicate that the alarm has become active.
Clicking this button, the alarm messages filtered by the keyword “Safety Control Station” will be
displayed. If other keywords are already set to the filter, the filter will be reverted to “Safety Control
Station.”
The following items are displayed on the System Alarm view status bar:
Display range of the window selected in the Filter dialog box
Number of displayed messages, number of messages occurred
Laboratory E
Exercise Q1. Explain what causes system alarm and the significance of the message color.
Q2. How many system alarm messages (maximum) can be displayed before the oldest messages are
deleted?
A. System View
Operator guide messages are used to prompt the operator’s acknowledgment for certain
operation during certain progress of the process.
The operator guide messages that have occurred are displayed in order from the latest messages, in
the Operator Guide Window Message Display area.
When a message is initiated, a message buzzer is activated and the LED for the button in the System
Message window or the key on the operation keyboard starts to flash to notify the operator.
This button prints out all operator guide messages that occurred.
This button acknowledges the guide message. When all the operator guide messages
are acknowledged, the Operator Guide window call button will change from flashing to lit. When all the
operator guide messages are deleted, the color of the button will return to the normal display color.
This button deletes the guide messages that have been already acknowledged from the
operator guide messages.
Select a dialog type message then click this button may call up an Operator Guide
Individual Acknowledgment window which prompts for the operator ’s confirmation. An entry dialog box
is called up if any data entry is required to acknowledge the message. Upon completion of operation
in this window, the message mark for the corresponding operator guide message displayed in the
operator guide window stops flashing.
This button may halt the updating of the operator guide message display for 5 seconds.
Click this button again may restart display update.
This button calls up the Filter dialog. In the Filter dialog, the filter conditions of the
Operator Guide window, such as displaying Operator guide messages from a specific control station or
function block can be specified.
A. System View
The following items are displayed in the Operator Guide view status bar.
•Window display range selected in the Filter dialog
•Number of displayed messages, number of generated messages
A. System View
Laboratory F
Q3. How many process guide messages (maximum) can be displayed before the oldest messages are
deleted?
A. System View
The Message Monitor window displays time series operation record messages.
Previously, acknowledgment of the operation record messages required these messages to be output
to a printer, or to be searched for using the Historical Message Report. Only specified messages are
acquired and displayed in the Message Monitor window for real time acknowledgment of the
occurrence of these messages.
NOTE: Specifying too large a number increases the load; the specified number should be the default
setting of 200 or lower.
This button may halt the updating of the operator guide message display for 5 seconds.
Click this button again may restart display update.
This button calls up the Filter dialog. The Filter dialog box is used to specify the filter
conditions for displaying a message for a specific control station or an arbitrary message in the
Message Monitor window.
A. System View
This button calls up the Message Registration dialog box. The Message Registration
dialog box is used to register the type of a message to be displayed in the Message Monitor window
and the number of messages to be stored.
Window
The status bar in the Message Monitor window displays the following items:
•Window display range selected in the Filter dialog box
•The number of messages to be displayed and the number of messages that have occurred
Laboratory G
Q2. How many monitoring messages (maximum) can be displayed before the oldest messages are
deleted?
A. System View
The operators performing the operation and monitoring functions are classified based on their privilege
level (authority). This classification is called user. The following attributes are assigned to each user:
User name
Password
Comment
User group name. The users are classified into groups based on their operation and monitoring
scopes.
Function security level. An attribute called “security level” is assigned to the function blocks.
Automatic user-out. When an automatic user out-time is defined, the user automatically
changes to the OFFUSER when the automatic user-out time elapsed.
This function calls up the User-In dialog box. Registering or changing passwords, switching users
(user-in), users log-out, and shutting down Windows may be done in the User-In dialog box. The figure
below shows an example of the User-In dialog box.
I. INSTRUMENT FACEPLATE
The instrument faceplate displays the status and data of a function block, an instrument or
contact I/O graphically and compactly on a window. The Faceplate window displays instrument
faceplates, which indicate the status of a function block in the form of a window.
The Faceplate window is used not only for monitoring but also for changing or setting of parameters
and changing modes by operating the instrument faceplate.
The instrument faceplates are displayed on a Graphic window or a Faceplate window. When displayed
on a Graphic window, the instrument faceplate may be displayed in normal format or in compact
format.
The following operations may be performed on the instrument faceplates displayed in the active
window.
SV Operation-Right Transition Operation
Block mode change Operation
Data INC/DEC Operation
Data Entry Operation
I3 PROPERTIES OF A TAG
There are 2 major properties of a tag that will affect its monitoring and operation functions.
Security level
Alarm Handling level
The alarm handling level of a tag is defined in the Function Block Detail Builder.
The alarm processing level is defined for each function block. The output operation for each alarm
priority can be selected. The HIS performs alarm output action according to the alarm processing level.
The Operation and Monitoring executes the following alarm processing according to the alarm
priority:
A. System View
Table Designating the Alarm Priority (Default)
Display Printout Log Repeated Operation upon
Alarm Buzzer Alarm flashing
Status in a to a to a warning returning to
priority sound action
window printer file alarm normal
Alarm Dependent on the
High- Y Y Y Y Lock type Y
initiated alarm in action
priority
alarm System Dependent on the
Y Y Y Y Lock type Y
recovered alarm in action
Alarm
Medium- initiated Y Y Y Y Lock type N N
priority
alarm System
Y Y Y Y Lock type N N
recovered
Alarm
Low- Y Y Y Y Non-lock type N N
initiated
Priority
alarm System
Y Y Y Non-lock type N N
recovered
Self-acknowledge
Alarm
N Y Y type N N
initiated
Logging (system-fixed)
alarm Self-acknowledge
System
N Y Y type N N
recovered
(system-fixed)
Self-acknowledge
Alarm
N N type N N
initiated
Referen (system-fixed)
ce alarm Self-acknowledge
System
N N type N N
recovered
(system-fixed)
Y: Yes
N: No
Blank: The function is unavailable.
Alarm Flashing Action
Basically, the alarm flashing action starts upon receiving a message that indicates occurrence of an
alarm. The action stops upon receiving a message that indicates returning to a normal status, or when
acknowledgment operation is performed by the operator. The alarm actions are classified into the
following types based on the flashing actions that correspond to alarm occurrence, returning to a
normal status and acknowledgment operation:
Lock type (for high-priority and medium-priority alarms)
Non-lock type (for low-priority alarms)
Self-acknowledge type (for logging alarms)
1. Lock Type Until the operator performs acknowledgment operation, flashing continues even after
the alarm status returns to normal (NR).
Figure Time Chart of Flashing Actions of the Self-Acknowledge Type (Self Recovery Type)
I4 TRACKING
There are 2 types of tracking function which can be assigned to a function block:
Output tracking
Input tracking
The output tracking is a function that forces the output value to match the value of the output
destination or the value of the tracking-input signal.
For a cascade connection, when the downstream is opened and closed again to regain control, the
manipulated output value (MV) may change abruptly. To prevent this, the MV is forced to be equal (or
to track) to the value of the output destination while the control action stops. This enables the block
mode switch that causes no abrupt change in the manipulated output value (MV).
In a controller, when switching from the manual (MAN) mode to automatic mode, the existence of a
large deviation is harmful as it makes the manipulated output change (dMV) very large. With
measurement or input tracking, the setpoint value (SV) is forced to agree with the process variable (PV)
in manual mode operation via process variable tracking, abrupt Control Action can be avoided when
the mode switches to automatic (AUT).
Laboratory I
Exercise
Practice
1. Display tag FIC100 and change the mode of control to CAS MAN and AUT mode
Note: the change in colors of the SV and MV indicators and explain the significance.
2. Next, in AUT mode, change the SV of FIC100 to 50. In MAN mode, change the MV of FIC100 to
70.
3. Each time you login as OFFUSER, ONUSER and ENGUSER, display the user defined window
“SECURITY”. Note the number of tags displayed for each different user login. Use
Tag/Function Block Security Table I1.2 to verify.
4. Each time you login as OFFUSER, ONUSER and ENGUSER, display the user-defined window
“SECURITY”. Try to change the settings of each tag and note the differences.
5. Display the user defined window “IMPORTANCE” and make the following changes:
11T101 - Change the control mode to MAN and change the MV to 60.
11T102 - Change the control mode to MAN and change the MV to 60. *Note the differences
in operation.
6. Display the tag “NTRACK” and make the following changes:
Change the control mode to MAN
Change the MV to 70 and Observe the SV indicator and note if there is input tracking.
7. Display the tag “TRACK” and make the following changes:
Change the control mode to MAN
Change the MV to 70 and Observe the SV indicator and note if there is input tracking.
8. Display the tags LIC100 and FIC100 and make the following changes:
Change the control mode of FIC100 to AUT.
Change the SV of FIC100 gradually and observe how the MV indicator of LIC100 changes.
A. System View
J. Browser Bar
The Browser Bar is displayed in the left or right side of the screen, and has the role as the
launcher to call up various operation and monitoring windows. It also helps the user to have a
general view of the system by showing the tree structures of the operation and monitoring
windows and the plant organization.
J1 Overview Toolbox
The organization of the operation and monitoring window of the system is displayed hierarchically.
In the View tab, the following operation can be done.
Window Hierarchy Display
Status Display of Windows
Calling up Windows
Window Hierarchy Display
The View tab displays the organization of the windows in a tree structure.
A. System View
The Trend tab displays the trend blocks, trend groups, and the trend acquisition pens (tag name. item
name) based on the trend acquisition definition.
1. Trend Acquisition Definition Display
Trend block names, trend group names, and "tag name. item name" (this represents trend pens) are
displayed in a tree structure based on the trend acquisition definition.
A. System View
The plant hierarchy definition information set with the builders is displayed in a tree structure.
Double-clicking a node on the tree can call up the corresponding window.
J1.4 Favorites
The shortcuts to the frequently-used windows shown in the hierarchical trees displayed in the View,
Plant hierarchy, and Trend tabs can be registered as "favorites".
J1.5 Search
From the information displayed on each tab, the items that match the specified search condition can be
searched for.
A. System View
J2 Preset Menu Toolbox
The frequently used functions can be registered in the preset menu and executed easily.
Buttons for calling up views and operating windows are displayed in the Tool Button toolbox.
The following two display formats can be switched by the format select buttons.
Icons: Displays tool buttons only.
List: Displays tool buttons and the description.
The figure below is an example of the Tool Button toolbox.
Calls up the hierarchy windows of the active window in ascending order of the sequence
defined in the window hierarchy.
Calls up the upper window of the active window.
Calls up the hierarchy windows of the active window in descending order of the sequence
defined in the window hierarchy.
Calls up the System Status Overview.
Calls up the Help window for the active operation and monitoring window.
Calls up the control drawing builder for the active operation and monitoring window.
Some windows may not be called up depending on the privilege level of the user.
By entering a window name or tag name, the corresponding operation and monitoring window can be
called up.
A. System View
K. Operation Keyboard
K2 Function Keys
There are function keys on the operation keyboard. User can assign predetermined commands to
function keys.
Each function key is provided with an LED and a label. The LED blinks to notify operator of an alarm or
to prompt operator to take a required action. The label is for showing an assigned function.
You can assign commands to the function keys on the Function Key Assignment Builder or in the
Function Key tab sheet of the HIS Setup window.
The alphabetic character in the parentheses is the command character used on the Function Key
Assignment Builder for assigning the command.
•Call Window (O)
Calls up a specified operation and monitoring window. From specific types of operation and monitoring
windows, you can call up their associated builder by adding “BDR” as the function parameter to the
window name. (*1)
•Call Frame (G)
In full-screen mode, calls up a frame in the main window.
•Execute System Function Key (K)
Runs a predefined system function key command.
•Execute Command for the Specified Monitor (L)
In a multiple-monitor environment, executes a system function key command on a specified monitor.
•Start/Stop/Resume Trend (T)
Starts, stops, or resumes batch trend data acquisition.
•Flash/Light/Turn OFF the LED (E)
Flashes, lights or turns off the LED on each function key.
•Execute a Program by File Name (F)
Runs a program of the specified name.
•Play/Repeat/Stop Multimedia File (X)
Plays a multimedia file of the specified name.
•Send Event to ActiveX Control (D)
Sends an event to the ActiveX control of a graphic view.
•Execute Panel set (P)
Calls up a predefined panel set.
•Call Window to Other Station (S)
Calls up an operation and monitoring window on a specified HIS.
•Clear Window on Other HIS (S)
Clears the windows displayed on a specified HIS.
•Call a faceplate on faceplate frame (C)
This command calls a faceplate on the right-hand side a faceplate frame of main window.
Note: *1:“BDR” is only valid when the Standard Builder Function package or Configured Information
Reference package is installed on the HIS computer.
*2: This command can be used to call a built-in type faceplate only when it is defined with HIS
Menu Editor. If this command is defined for the other purposes (such as for a graphic push-button), this
command will function in the same way the window call command (O).
You can specify a name or window name as the condition for triggering flashing of LED on the function
key.
•A tag name or an annunciator message.
•A window name. (Graphic view, Process Alarm view, Operator Guide Message view, System
Alarm view)
Figure Setting LED Flashing Conditions on the Function Key Assignment Builder
Whether or not the function key assignment can be changed in the HIS Setup window is specified by
setting one of the following security levels for each function key. Combination of the security level set
for the function key and the privilege level (S1, S2, S3) of the user determines if the user can change
the function assigned to the function key.
•General
•Important
•System operation
Relation of the security level of each function key and the privilege level of a logged-in user is as
follows:
•A user with privilege level S1 is allowed to change the function assignment of function keys with
“general” security level.
•A user with privilege level S2 is allowed to change the function assignment of function keys with
“general” and “important” security levels.
•A user with privilege level S3 is allowed to change the function assignment of any function keys.
A. System View
However, operation and monitoring related authorities for the function keys are defined as follows:
•Monitoring: None
•Operation: Authority to change function assigned to the function keys
Various one-touch keys are provided on the operation keyboard to facilitate operation.
The following figure shows how the window calling keys are arranged.
Call up the System Status Overview. The LED on this button indicates whether any
system alarm message has been generated, acknowledged, or not generated.
•Flashing in red
System alarm message has been generated but not acknowledged yet.
•Lit in red
System alarm messages were generated and all the messages have been acknowledged.
•Unlit
No system alarm message has been generated.
Switches the layers of the operation and monitoring windows and windows of the
general-purpose Windows applications back to front and vice versa.
Show the User-In dialog box and Browser Bar. In the upper half of the Browser Bar, Tool
Button Toolbox is shown and in the lower half of the Browser Bar, Preset Menu Toolbox is shown.
Pressing the keys [ALT] + [CTRL] + [F12] at the same time has the same effect as the AUX key.
Call up a Help window showing help messages related to the active window.
Calls up a Process Alarm view. The LED on this button indicates whether any process
alarm message has been generated, acknowledged, or not generated.
•Flashing in red
Process alarm message has been generated but not acknowledged yet.
Lit in red
Process alarm messages were generated and all the messages have been acknowledged.
•Unlit
No process alarm message has been generated.
Calls up an Operator Guide view. The LED on this button indicates whether any operator
guide message has been generated, acknowledged, or not generated. If CAMS for HIS is enabled,
CAMS for HIS Message Monitor is shown.
•Flashing in green
An operator guide message has been generated and is unacknowledged.
•Lit in green
Operator guide messages were generated and all the messages have been acknowledged.
•Unlit
No operator guide message has been generated.
Open the Browser Bar. The Browser Bar shows the Overview Toolbox showing the View
tab sheet.
Calls up the hierarchy windows of the active window in ascending order defined in the
window hierarchy.
Calls up the hierarchy windows of the active window in descending order defined in the
window hierarchy.
In manual mode (MAN), switches the data for operation from the manipulated output
value (MV) to the setpoint value (SV).
Increase the target data. While the INC key is being pressed, the data increases by
1 % of the full scale every 0.2 second. Therefore, it takes 20 seconds for the SV or MV pointer in the
faceplate to move over the full stroke.
Decrease the target data. While the DEC key is being pressed, the data decreases
by 1 % of the full scale every 0.2 second. Therefore, it takes 20 seconds for the SV or MV pointer in the
faceplate to move over the full stroke.
In INC/DEC operation for analog-type data, pressing this key and the INC key or
DEC key at the same time quadruples the rate of increase or decrease.
This button is use to change the block mode to the cascade mode (CAS) or
semiautomatic mode (SEMI). Press the AUT key and this key at the same time changes to the cascade
mode. Pressing the MAN key and this key at the same time changes to the semiautomatic mode.
Move the cursor up, down, left, or right in the active window.
Opens the Browser Bar and shows the Name Input Toolbox.
Close a dialog box or other windows. Same function as the ESC key.
When this key is used in combination with the [1] to [0], [-] and [=] keys, the functions
corresponding to the [F1] to [F12] keys on a computer keyboard can be executed.
For example, [↑] + [1] execute the F1 function. The [0], [-] and [=] keys correspond to the [F10] , [F11] ,
and [F12] keys, respectively.
A. System View
L. WINDOW SIZE
The HIS provides two operation screen modes, so that the operator can control the plant by utilizing an
interface that best suits the operation environment.
Full-Screen Mode
In this mode, the operation and monitoring windows are displayed over the entire screen.
Four types of display size can be specified for the operation and monitoring windows: Large Size (-SL),
Medium Size (-SM), Special Size (-SC), and Default Size (-SS).
When no display size is specified or - SS is specified, the operation and monitoring window is
displayed in the same size as the calling window (in the large size when the calling window cannot be
identified) though there are some exceptions.
Full-screen mode
When large (-SL) size is specified: 100 % (displayed in the primary window)
When medium (-SM) size is specified: 50 % (displayed in a pop-up window)
When special (-SC) size is specified: Displayed in the default size of each window (displayed in a
pop-up window)
Window mode
When large (-SL) size is specified: 80 %
When medium (-SM) size is specified: 50 %
When special (-SC) size is specified: Displayed in the default size of each window
Note that the HIS desktop area differs according to the display style of the Browser Bar.
Table How to Call up Operation and Monitoring Windows
Window Window Display size Display
Function parameter
type name -SL -SM -SC -SS position
None
{Generic name set name}
{Generic name = initial value}
User-defined {Generic name set name,
Graphic window generic name = initial values} x x x xx
name
{Generic name 1 = initial
value1,
generic name 2 = initial
value2 , ...}
Graphic with
control Tag name CONTROL x x x xx
attribute
Graphic with
graphic Tag name GRAPHIC x x x xx +X
attribute coordinate
+Y
User-defined
coordinate
window None
Trend name x x xx
Tag name TREND
Tuning Tag name TUN x x xx
Faceplate Tag name None xx
None
Tag name
Operator
.OG Control station name
guide
Plant hierarchy name x x x xx
[Recipe group number.]batch ID
Process None
.AL
alarm Tag name
A. System View
Control station name
Plant hierarchy name
[Recipe group number.]batch ID
Tag name
SFC SFC
Unit name x x xx
SEBOL Tag name SEBOL +X
Logic chart Tag name LOGIC x x x xx coordinate
+Y
Sequence
Tag name TABLE x x xx coordinate
table
Control
Tag name DRAW x x x xx
drawing
None
Tag name
Help window .HW Window name – – – – –
U.user-defined help number
M.message number
None +X
Process Tag [.sheet name] coordinate
.PR x x xx
Report IO [.control station +Y
name.element type] coordinate
None
Historical Tag name
message .HR Control station name xx x
report
Plant hierarchy name
[Recipe group number.]batch ID
System None
status +X
.SO x x xx
overview Domain number coordinate
display +Y
System None coordinate
.SA x x x xx
alarm Control station name
Advance None
.AF – – – – –
alarm filter Filter ID
HIS setup .SH None – – – – –
BCV status
.SF Station name
display
FCS status +X
.SF Control station name
display coordinate
x x xx
HIS status +Y
.SF Local station name coordinate
display
FCU status
.SF Control unit name
display
Image .IM None – – – – –
None
Product
.RO Recipe group number [.train
overview
name]
Batch ID
.RM Recipe group number.batch ID +X
[.train name] coordinate
Product x x xx
+Y
control Batch ID coordinate
Recipe group number.batch ID [.train name]
Unit nameΔPRODUCT
Recipe
.RP Recipe group number.batch ID
procedure
A. System View
Unit recipe Recipe group number.batch ID.
.RP
procedure unit recipe number
Tag name
Window
Builder name BDR – – – – –
Trend group
name
Control
drawing Tag name BDRDR – – – – –
builder
[ ]: Can be omitted.
Xx: Default size when size specification is omitted.
X: Can be specified.
Blank: Cannot be specified.
A. System View
M. TREND FUNCTION
The Trend Recording acquires process data such as temperature, pressure and flow rate gathered by
an HIS, as the function block’s tuning parameter and displays changes in the acquired data in a graph
(trend graph).
Data acquired via the Trend Recording can be utilized in the following functions.
Report
Long-term data archive
General-purpose Windows applications
A. System View
M3 Types of Trend Data Acquisition
The type of trend data acquisition is defined for each trend block in the Properties sheet of the
Trend Acquisition Pen Assignment Builder.
Trend data acquisition can be specified for the following 4 types:
Continuous-Rotary Type
Batch-Stop Type
Batch-Rotary Type
Other-Station-Reference type (Other Station Acquisition Trend)
Using this type, trend data acquisition starts and stops according to the received commands. If no stop
command is received, the data acquisition will stop automatically after acquiring the maximum number
of samples.
Start, stop, and resume commands can be issued by the following means:
Buttons on the toolbar of the Trend View
Operation on the Graphic View, Function Key or Preset Menu
Sequence Messages Request function
Using this type, trend data acquisition starts and stops according to the received commands. Once
started, the data acquisition continues until a stop command is received. If the maximum number of
samples is reached before receiving a stop command, older data are overwritten with new data.
Start, stop, and resume commands can be issued by the following methods:
Buttons on the toolbar of the Trend View
Operation on the Graphic View, Function Key or Preset Menu
Sequence Messages Request function
A. System View
Using this type, the trend data acquired by other HIS are referenced in trend block units.
On the Trend Acquisition Pen Assignment Builder, the station names of the referenced HIS and the
referenced trend block number should be defined.
The sampling period of trend data is defined for each trend block in the Properties sheet of the Trend
Acquisition Pen Assignment Builder. The sampling period can be selected from among 1 second, 10
seconds, 1 minute, 2 minutes, 5 minutes, and 10 minutes. The number of trend blocks specified for
the sampling periods of 1 minute, 2 minutes, 5 minutes, or 10 minutes is 18 in total. The number of
trend blocks specified for the sampling periods of 1 second or 10 seconds is 8 in total.
Note that the sampling periods that allow specification of the closing processing are 1 minute, 2
minutes, 5 minutes and 10 minutes.
The Recording Time is determined by the specified sampling period. The recording span is the time
taken to acquire data for the maximum number of samples with the specified sampling period. The
maximum number of samples is 2880 (fixed).
The table below shows the relationship between trend sampling periods and recording span:
Table Trend Sampling Periods and Recording Time Span
Sampling period 1 second 10 seconds 1 minute 2 minutes 5 minutes 10 minutes
Recording Span 48 minutes 8 hours 2 days 4 days 10 days 20 days
For example, if the sampling period is 1 minute, the time span is as follows.
1 minute x maximum number of samples (2,880) = 2,880 minutes = 48 hours = 2 days
Thus, two days of data are recorded.
A. System View
M5 Trend View
This button outputs the image of the currently displayed Trend View.
This button is used to call up the Trend Pen Assignment dialog box. In the
dialog box, trend pen assignment for the continuous-type trend, change of display attributes, and
registration of the batch trend reference pattern are performed.
These buttons reduce or enlarge the data-axis scale of the trend graph.
In the standard scale, the trend graph is displayed on a scale from 0 % to 100 %. By changing the
data-axis scale, the trend graph display may be enlarged or reduce with the center (50 %) as the
reference point. Each time the button is clicked, the scale changes to 1/2, 1, 2, 5 and 10 times.
The data-axis scale is shown in the left bottom of the trend graph.
When this button is pressed down, the pen number is displayed on the trend graph.
To hide the pen number, release the button to normal.
This button switches display modes. The menu is displayed when this button is
clicked, and standard mode, various tile modes or zoom mode can be selected.
When trend data and reference patterns are superimposed in the graph, this button
selects the target of scrolling. From the menu displayed by clicking this button, trend data only,
reference patterns only, or both trend data and reference patterns can be selected to be scrolled.
When the trend data to which reference patterns are assigned are displayed, this
button selects whether to show or hide the trend data and reference patterns.
The data to be shown is chosen from the menu displayed by clicking this button.
Trend data only, reference patterns only, or superimposed display of trend data and reference patterns
can be selected.
The trend data acquisition continues even while the trend data are hidden.
This button calls up the trend point view of the selected pen.
When the trend graph scales have been changed, clicking on this button returns the
trend graph display to the initial state.
This button moves the main index mark to its initial position (position of the latest
data).
A. System View
This button saves the trend data displayed in the Trend View in a file.
This button displays the data saved in a Long-Term Data Archive File.
From the menu displayed by clicking this button, select [Specify file] to open the dialog box to select an
archived file. After selecting a file, clicking this button and selecting [Specify time] from the displayed
menu can specify the time of the first data to be read and the number of samples for display.
This button is displayed when the Long-Term Data Archive package is installed and a long-term data
archive period is set.
Clicking this button displays the data of the previously archived file with respect to
the currently displayed archive file. If this button is clicked while the Trend View is displaying
real-time data, the data of the most recently archived file are displayed.
This button is displayed when the Long-Term Data Archive package is installed and a long-term data
archive period is set.
Clicking this button displays the data of the next archived file with respect to the
currently displayed archive file. If the next file does not exist, the Trend View returns to real-time
data display.
This button is displayed when the Long-Term Data Archive package is installed and a long-term data
archive period is set.
The Trend Point View can be called up only from the Trend View.
To call up a Trend Point View, select a trend pen from the legend area of the Trend View, and click the
Trend Point View call-up button on the toolbar.
The eight Trend Point Views corresponding to each eight pens displayed in a Trend View are in the
relation of hierarchy windows (windows at the same level in the window hierarchy).
If the hierarchy window call-up button in the Tool Button Toolbox of the Browser Bar is clicked or the
hierarchy window call-up key on the operation keyboard is pressed while a certain Trend Point View is
active, the appropriate Trend Point View is called up in the ascending or descending order of the pen
number.
M7 Clipboard Copy
The trend data values of the scope displayed in the Trend View are copied.
The data copied onto the clipboard can be used by incorporating it to the spreadsheet software etc.
The following information is copied:
For each trend pen: the number of copied data points, tag name, data item, tag comment, low limit
value, high limit value, number of decimal point digits, and engineering unit
For each of the copied data points: date and time, data value, and data status
A. System View
Laboratory M
Exercise
Practice
4. Save the trend data as a trend file into the hard disk.
5. Retrieve the saved trend data and display it on the current trend window.
N. TUNING VIEW
The Tuning View displays a detailed control status for individual function blocks. This view can be used
for monitoring and be used to change tuning parameters. It is also used for adjusting the settings for
various set points and control parameters, as well as for attaching and removing operation marks.
The Tuning view is automatically created when a function block is created on the Function Block
Overview Builder.
To call up the tuning view, 1) Display the faceplate of the instrument. 2) Use the toolbox to call its
tuning window. OR
1) Call the tuning window using the window name input by entering for example FIC100 TUN
The Tuning view consists of a toolbar, parameter display area, tuning trend display area, instrument
faceplate, and status bar.
This button outputs the image of the Tuning view currently displayed.
This button acknowledges the alarm generated in the function block that is
A. System View
displayed.
When this button is pressed down, the tuning trend data continues to be collected
even when the Tuning view is closed; and the tuning trend is displayed when the Tuning view is
called up the next time.
This button can be used when the tuning trend is displayed.
When this button is pressed down, the tuning trend display pauses. To resume
updating the display, return the button to its original state.
When the button is returned to the original state, the tuning trend display resumes from the
present time. Note that data acquisition continues even when the display is paused.
This button can be used when the tuning trend is displayed.
When this button is clicked, the tuning trend graph is reduced or enlarged
in the direction of the time axis (horizontal direction), with the right edge (latest time) of the graph
as the reference point.
This button can be used when the tuning trend is displayed.
When this button is clicked while the tuning trend graph is displayed in an
analog format, the data axis display scale can be reduced or enlarged with respect to the
displayed trend graph.
This button can be used when the tuning trend is displayed.
Clicking this button may change the function block to the primary direct block mode.
When this button is clicked, a dialog box appears to prompt for the operator’s confirmation. To
return to the original mode, double-click the mode display string in the parameter display area to
call up the Data Input dialog box, then enter the mode name.
This button is displayed when the Tuning view is for a function block that supports the primary
direct mode.
Clicking this button may change the function block mode to the AOF mode to
suppress alarms.
When this button is clicked, a dialog box appears to prompt for the operator’s confirmation. To
return to the original state, click this button again.
This button is displayed when the Tuning view is for a function block that supports the AOF mode.
Clicking this button may change the data status to calibration status.
When this button is clicked, a dialog box appears to prompt for the operator’s confirmation. To
return to the original state, click this button again.
This button is displayed when the Tuning view is for a function block that supports the calibration
mode.
The present values of the function block parameters are displayed in the parameter display area of the
Tuning view. The types of displayed parameters vary with the type of function blocks.
The function block process data is plotted as the tuning trend in the Tuning view.
The instrument faceplates in the Tuning view graphically indicate the present value of process data and
other data in the function block. By operating the instrument faceplate, parameter setting and changes
as well as mode changes can be performed.
The tuning trend’s time-axis display span and the reducing/enlarging rate of the data axis scale of
tuning trend are displayed in the Tuning view status bar.
A. System View
The Logic Chart view displays a logic chart defined using the Logic Chart Builder, and the completion
status of a logic circuit.
This button outputs the image of the displayed Logic Chart view.
This button calls up the dialog box for setting zoom levels.
A. System View
N3.2 Logic Chart Display Area of the Logic Chart View
The Sequence Table view displays the detailed mechanism programmed in a sequence table block,
and the operation status of that sequence program.
This button outputs the image of the current Sequence Table view.
This button calls up the Faceplate view displaying the sequence table block from
which originally called up.
When the extended sequence table is being displayed, the Faceplate view called up is the one for
the original sequence table.
This button changes the comments displayed in the comment column for the
condition signal or operation signal in the sequence table display area. Either the signal comment
or tag comment is displayed in the comment column.
This button is used when changing the page in the extended sequence table.
The sequence table of the previous page of the Sequence Table view currently being displayed is
called up.
This button can be used when there is an extended sequence table.
This button is used when changing the page in the extended sequence table. The
sequence table of the next page of the Sequence Table view currently being displayed is called
up.
This button may be used when there is an extended sequence table.
A. System View
N4.2 Sequence Table Display Area
The comment for condition and action signals and tag comment are defined with the
Function Block Detail Builder.
Condition Rule, Action Rule
The condition and action rules are displayed in Y/N patterns. A condition is satisfied if the result of
condition testing for the condition signal matches the pattern (Y: satisfied; N: not satisfied) in the
condition rule. The action rule is processed when the result of the next condition rule is received.
Processing is performed according to the pattern specified in the same rule for which conditions are
satisfied.
The status of whether these rules are satisfied is displayed in distinct colors, and the pattern colors
change.
•Red: Condition satisfied
•Cyan: Condition not satisfied
In a sequence table with a step label display, only the color of the pattern for the rule being executed
changes.
Display of Status for whether Condition Satisfied
The satisfied status of the condition is displayed using the background color of the step label.
•Red: Condition satisfied
•Green: Condition not satisfied
•Yellow: Non-executing (in the case of a sequence table with a step label display), or the
sequence table block is in MAN or O/S mode.
A. System View
Next Step Label
The label of the next step to advance to is displayed.
In the THEN label area, the next step to advance to upon satisfaction of the condition is shown. The
label of the step to advance to upon non-satisfaction of the condition is shown in the ELSE label.
Extended Table Label
When there is an extension destination sequence table or extension origin sequence table in the
sequence table that is displayed, the sequence table name is displayed.
Laboratory N
Exercise
Practice
1. Display the tuning panel of 11X101 by typing “11X101 TUN” in the window name input.
2. Assign an Operation Mark of “CAUTION” to the tag.
3. Preset the following to 11X101: Mode = AUT SV = 50 HH = 95 PH = 90 PL = 10 LL = 5 MH = 80
4. Set VL = 1.
Set SV to 70, observe the PV increase at a rate more than VL.
VEL+ alarm will be generated.
Acknowledge the alarm.
Set VL = 100, set SV = 50.
5. Set DL = 10.
Set SV to 70, note that DV > DL.
DV+ alarm will be generated.
Acknowledge the alarm.
Set DL = 100, set SV = 50.
6. Set SV = 80.
Bring SV to 85, Observe what happens when MV reaches MH.
Acknowledge the alarm.
Set MH = 100, Set SV = 50.
A. System View
The process report is to collect information on the system operating status and displays it in a window
or prints to a printer depending on the user’s request. The current status will be displayed or printed.
The following two types of reports are available in the Process Report view.
Tag report
I/O report
To call up the process report window:
1) Use the toolbox to call the process report window.
2) Use the operator keyboard to call the process report window.
This button prints out the most recent status of the report that is displayed.
This button displays the tag reports that meet the search conditions set in the Tag
Report Search dialog box. The tab selected in the Tag Report Search dialog box will be the object
A. System View
of the search.
Clicking this button again while a tag report is shown displays the updated report with the same
conditions.
This button displays the I/O reports that meet the search conditions given in the I/O
Search dialog box.
The following items are displayed on the status bar of the Process Report view.
•Name of tab selected in the Tag Report Search dialog box (when the tag report is displayed)
•Element type selected in the I/O Report Search dialog box
In a tag report, various statuses such as the function block alarm status, mode and present value of
process data are displayed for each element. A tag report can be searched by station name, tag name
or alarm status.
Tag names of the following elements can be the object of a tag report.
•Function block (%BL)
•Annunciator (%AN)
•Common switch (%SW)
•Process I/O (*1)
•Global switch (%GS)
The tag report search is done using the Tag Report Search dialog box.
There are five tabs in the Tag Report Search dialog box. Once the search conditions is set, the
previous values will be displayed again as it is. Therefore, it is convenient to set frequently used search
conditions beforehand.
Click the [OK] button after setting search conditions to start the search. The results of the search will be
displayed in the Process Report view.
Also, the tab selected at the time the Tag Report Search dialog box is closed with the [OK] button, will
be used as the search conditions the next time the tag report is displayed.
A. System View
In the I/O report, the I/O status is displayed as a digital value for each element. An I/O report can be
searched by station name or element type.
The following elements can be the objects of an I/O report:
•Annunciator (%AN)
•Common switch (%SW)
•Communication I/O (%WB)
•Process I/O (%Z)
The I/O report search is done using the I/O Report Search dialog box.
The station name or element type of the control station can be set as the search conditions for the I/O
report in the I/O Report Search dialog box.
Click the [OK] button after setting search conditions to start the search. The results of the search will be
displayed in the Process Report view.
Also, the search conditions set at the time the I/O Report Search dialog box is closed with the [OK]
button, will be used for the search conditions the next time the I/O report is displayed.
The figure below shows an example of the I/O Report Search dialog box.
The results of the search in the I/O Report Search dialog box are displayed in the Process Report view
(I/O report).
When the data is ON, “1” is displayed.
When the data is OFF, “.” (Period) is displayed.
Data is periodically refreshed in the I/O report display.
The figure below shows an example of a Process Report view (I/O report).
A. System View
The Historical Message Report window displays an overview of historical messages such as the history
of each alarm message type or the operator’s operation history.
To call up the historical message report window:
1) Use the toolbox to call the historical message report window.
2) Use the operator keyboard to call the historical message report window.
The menu bar of the Historical Message Report window consists of the same menu items as toolbar
buttons and the ones that modify printer settings and window display style.
The menu items same as the toolbar buttons are shown in the table below.
Table Menu Items with the Same Function as Toolbar Buttons
Menu item Toolbar button
Open
File Save
Find
Edit
Pause
A. System View
View Redraw
This button calls up the File Select dialog box. This is the same as [Open] in the
File menu.
Historical messages are saved separately according to the message type. In the file selection
dialog box, the user can select the type of historical message to display; a folder name can be
specified when saving a historical message file into a folder other than the standard folder.
This button refreshes the displayed historical messages to the latest status.
It is the same as [Redraw] in the View menu.
This button calls up the search dialog box for setting the search conditions.
It is the same as [Find] in the Edit menu.
This button aborts the historical message search being executed. This button can
be used after the search is begun.
It is the same function as [Pause] in the Edit menu.
This button outputs the currently displayed historical message to a file. It is the
same as [Save] in the File menu.
Clicking this button calls up the following dialog box. Specify a file name and a storage location,
and then click the [Save] button to output the historical message to the specified text file in the
CSV format.
A. System View
The number of historical messages retrieved is displayed in the status bar of the Historical Message
Report window.
The items shown below can be used as keywords for a search in the HIS historical message report.
•Specifying a time interval using date and time
•Specifying message type
•Specifying message origin
•Specifying user name
•Specifying arbitrary character
To call up the Search dialog box from the toolbar, use the toolbar button
The figure below shows an example of the Search dialog box used when searching for a historical
message by specifying the date.
A. System View
Laboratory O
Exercise
1. Display the Process Report of Process I/O. Call up %Z012204S0101 from the window name input
and observe the changes in the Process Report Window when the DO is turned on.
2. Display the Historical Report Search Dialog. Search messages of the following conditions:
Message Type : Operation Messages
Date : Past 5 hours
Direction : Backwards
A. System View
The System Status Overview displays the statuses of all stations and the communication devices
within the domain in a list. The System Status Overview displays the statuses of all stations and the
communication devices within the domain in details by various icons. From here, the windows of
system maintenance can be called up.
Clicking this button may change the Status Display area to List-Style / Icon-Style.
This button is for calling the System Status Overview of the domain connected through
the bus converter.
This button calls up the System Report dialog, which displays the system information.
The contents of the dialog display can be printed or output to a file.
This button is for disabling the System Status Overview (Grayed Out).
This button calls up the HIS Status Display view for the current station.
This button is displayed on the console type HIS.
BCV: ABC11D-V
Equalization is a process to equalize the items defined by builders and the database in the current
station. The creation dates of the database in the control station or builders and of the database of the
current station are compared at the time HIS is activated. If there is an inconsistency, the equalization
request dialog is displayed in the System Message banner. In this case, perform the equalization in the
Equalization tab.
By clicking this button, the user can call up the System Alarm view and acknowledge the
alarm contents. The button status also indicates the status of the system alarm message.
•Constant red: System alarm message occurred.
•Others: No system alarm message has occurred.
This button cannot be used in the LFCS Status Display view. The node status display
dialog box is used to load the IOM.
This button calls up the FCS Report dialog box, which displays station information.
The contents of the dialog box display can be printed out or output to a file.
This button may start up a stopped control station in the status display view.
Click this button may call up a dialog box to prompt for acknowledgment.
This button calls up the HIS Status Display view of the current station.
This button is displayed on the console type HIS.
A. System View
Status Display Area of the FFCS Status Display View
Figure Symbol indicating abnormality (in the case of battery temperature abnormality)
A. System View
•Air in temperature
•Air out temperature
•Battery temperature
•Battery status
Station Configuration Display
The following status is displayed as the station status of the control station:
•Start Condition
[AUT]: Restart
[MAN]: Initial cold Start
[TIM]: Restart after momentary power failure, and initial cold start after prolonged power failure
•CPU status
A colored character string and symbol are used to indicate the status of each CPU. The
character string is displayed in green when normal, in red when abnormal, in yellow when in
standby, in blue when hardware is ready (Hard Ready state), and in cyan during maintenance.
Also, the character string [COPY] flashes in white while a program is being copied.
A colored bus number and symbol are used to indicate the status of each SB (ESB).
•Power Supply status
The status of each power supply unit is displayed in green when normal and in red when
abnormal.
ESB Bus Status Display
The ESB bus number is displayed in green when normal and in red when abnormal.
Node Status Display
The following status is displayed as the node configuration of the control station: When the node
configuration display area is double-clicked, the Node Status Display dialog box is called.
•Node number
•Node Connection
[RMT] is displayed if the connection form of the node is remote. Nothing is displayed if the
connection form of the node is local.
•Communication status
The communication status of each node is displayed by the character string [COM]. [COM] is
displayed in green for normal communication state and in red for abnormal communication
state. Nothing is displayed for node 1.
•Power supply status
The power supply status of each node is displayed by the character string [PSU]. [PSU] is
displayed in green for normal power supply state and in red for abnormal power supply state.
•I/O Module status
The abnormal state of the I/O module is displayed. If the I/O module is abnormal, [I/O FAIL] is
displayed in red. If it is normal, nothing is displayed.
Figure FFCS-L Node Status Display Dialog Box (for the I/O Module Section of the FCU)
A. System View
The date and time set in the dialog box are applied to the machines shown below.
•All the control stations in the same domain
•All HIS in the same domain
The time change in the time setup dialog box also changes the HIS time due to equalization is
executed by other HIS in the control bus.
Also, the date and time set will also be reflected in the date and time of the Windows system.