Professional Documents
Culture Documents
Signature/Date
1.0 Purpose:
This is to provide standard guidelines for the measurement of the mass of substances using the
analytical balance.
2.0 Scope:
This procedure is applicable to the determination of the mass of substances in the
chemical laboratory of Quality Control department using the analytical weighing balance.
3.0 Responsibility: Chemist, Microbiologist, Quality Control Officer
4.0 Accountability: Quality Control Manager and General Manager
5.0 Procedure:
5.1 Put on the mains
5.2 Set the balance on a leveled surface by adjusting the leverage stand while taking note of the liquid to
centralize it within the circle.
5.3 Set the reading to zero using the tare button
5.4 Place the materials to be measured on the pan
5.5 Close all the slides to prevent interference with the environment
5.6 Take the reading on the balance and record
5.7 Remove the materials from the pan
5.8 Clean up and turn off the mains
DISCLAIMER: Document Soft Copies on the Server and Hard Copies having the Official Company Stamp and Signature of
Quality Control Head are ‘Controlled and Valid’, all others are ‘Uncontrolled and Invalid’.
Page 1 of 1
HMA MEDICAL LTD
Plot 9, Block 4, Transit Camp Road, Ilorin, Kwara State,
Nigeria.
STANDARD OPERATING PROCEDURE
Title: Effective Date:
Department: Review Date:
No.: HMA//SOP000-00 Supersede: Page no.: See below
DISCLAIMER: Document Soft Copies on the Server and Hard Copies having the Official Company Stamp and Signature of
Quality Assurance Head are ‘Controlled and Valid’, all others are ‘Uncontrolled and Invalid’.
Page 2 of 2