Professional Documents
Culture Documents
Intervention Plan No. 05 - 03
Intervention Plan No. 05 - 03
7 Plan:
Shift
Intervention Expected Cutting Wheel Working Working Deco. Time
Ring no.
No. Date Station Pressure Time Time w/o
overlap
29 th OF
Intervention
JANUARY 1+460 m 262 1.9 bar 140 min 85 min 155 min
# 05
2024
1- Ensure that TBM slurry pipes are enough to advance at least 2 advances.
2- Retracting the cutting wheel 3 cm from the face.
3- Follow the procedure and prepare the bentonite filter ca2ke.
4- Retracting the cutting wheel 2 cm from the face.
5- Draw down the level and ensure the face stability.
Open the door at 12 O`clock and keep the bolts in the side metal box.
Wear the safety harness before you get out of the doors.
Install the platforms.
Clean the cutting wheel and measure the discs, knifes and buckets with clear photos arm by arm.
Continue cleaning the cutting wheel and measure the discs, knifes and buckets with clear photos
arm by arm.
Clean the center discs and any remaining clogging.
Install the platform at the center of cutter head.
Make sure to complete tightening the 1st rippers box with the correct torques.
Rotate the CW until you make sure ARM3 vertical at 12 o`clock.
Shift Plan no. # 06:
Dismantle center ring discs cutters No. #7 & No. # 5.
Dismantle center ring discs cutters No. #3 & No. #1.
Open the doors at 9 O`clock and keep the bolts in the side metal box.
Rotate the CW until you make sure ARM02 horizontal at 9 o`clock.
Install the plate forms.
Dismantle the Bucket RHS & LHS (Arm no. 02)
Dismantle ring disc cutters No. 36A / 35A (Arm no. 02)
Dismantle and Install new ring disc cutters No. 33B/34B (Arm no. 04)
Dismantle and Install new ring disc cutters No. 33A/34A (Arm no. 08)
Dismantle and Install new ring disc cutters No. 27/28 (Arm no. 01)
Dismantle and Install new Cutting Knife No. # 11 RHS & LHS (Arm no. 01)
Dismantle and Install new Cutting Knife No. # 13 RHS (Arm no. 01)
Install ring disc cutters No. 29/30 (Arm no. 05) at Box No. 21/22 (Arm no. 05)
Dismantle and Install new ring disc cutters No. 25/26 (Arm no. 05)
Dismantle and Install new Cutting Knife No. # 11 RHS & LHS (Arm no. 05)
Dismantle and Install new Cutting Knife No. # 13 LHS (Arm no. 05)
Dismantle and Install new Cutting Knife No. # 13 RHS (Arm no. 05)
Install the Bucket RHS & LHS (Arm no. 05).
Install the Bucket RHS & LHS (Arm no. 06).
Dismantle the Bucket RHS & LHS (Arm no. 04) & (Arm no. 03) and put them out.
Dismantle and Install new Cutting Knife No. # 8 RHS (Arm no. 02)
Dismantle and Install new Cutting Knife No. # 10 RHS (Arm no. 02)
Dismantle and Install new Cutting Knife No. # 12 RHS (Arm no. 02)
Dismantle and Install new Cutting Knife No. # 13 RHS (Arm no. 03)
Dismantle the wear detector no. 4 (WD_04) (Arm no. 03)
Dismantle and Install new Cutting Knife No. # 8 RHS (Arm no. 04)
Dismantle and Install new Cutting Knife No. # 12 RHS (Arm no. 04)
Shift Plan no. # 27:
Dismantle and Install new Cutting Knife No. # 14 RHS (Arm no. 04)
Install the wear detector no. 4 (WD_04) (Arm no. 03)
Install the Bucket RHS & LHS (Arm no. 04) & (Arm no. 03)
Dismantle the Bucket RHS & LHS (Arm no. 07) & (Arm no. 08) and put it out.
Install the wear detector no. 2 (Arm no. 07)
Dismantle and Install new Cutting Knife No. # 8 LHS (Arm no. 06)
Dismantle and Install new Cutting Knife No. # 10 LHS (Arm no. 06)
Dismantle and Install new Cutting Knife No. # 12 LHS (Arm no. 06)
Dismantle and Install new Cutting Knife No. # 14 RHS & LHS (Arm no. 06)
Dismantle and Install new Cutting Knife No. # 11RHS & LHS (Arm no. 07)
Dismantle and Install new Cutting Knife No. # 13 RHS & LHS (Arm no. 07)