Professional Documents
Culture Documents
user documentation
2068394-008 paper
© 2013-2016 General Electric Company.
All rights reserved.
Due to continuing product innovation, specifications in this manual are subject to change without notice.
For technical documentation purposes, the abbreviation GE is used for the legal entity names, GE Medical Systems Information Technologies,
Inc. and GE Healthcare Finland Oy.
The D19KT VER01 display provides a Trim Knob control and indicates a power failure alarm by a continuous
beep. The display integrates audible (B850 only) and visual alarms, and provides USB connectivity.
Acquisition modules
With software version 2.0.7 or later with the Respiratory Module License the following
statement applies:
● The module interface is disabled when the NICU software package is selected with
other E-modules than E-NSATX or E-MASIMO or CARESCAPE Respiratory Modules
(E-sCAiO, E-sCAiOV, E-sCAiOVX, E-sCAiOE, E-sCAiOVE, E-sCO, E-sCOV, and E-sCOVX).
Gas exchange measurement with CARESCAPE respiratory modules is not available
for neonatal patients.
For earlier software versions, or version 2.0.7 or later without the Respiratory Module
License the current manual statement applies:
● The module interface is disabled when the NICU software package is selected with
other E-modules than E-NSATX or E-MASIMO.
Equipment symbols
The following symbols have been added to the table or their explanations have changed.
Every device has a unique marking for identification (UDI). The UDI marking appears
on the device label.
Date of manufacture. This symbol indicates the date of manufacture of this device.
The first four digits identify the year, the following two digits identify the month, and, if
indicated, the last two digits identify the day.
CAUTION U.S. Federal law restricts this device to sale by or on the order
of a physician.
The characters used in the UDI marking represent specific identifiers. In the example above:
Device identifier:
● (01) = GS1 global trade item number (GTIN) of the device.
● 1234567891234 = Global trade item number.
Production identifiers:
● (21) = GS1 application identifier for the serial number of the device.
● SJN14241237HA = Serial number.
● (11) = GS1 application identifier for the manufacturing date of the device.
● 150628= Manufacturing date: year-month-day (YYMMDD).
Note that for some product types the production identifier can have other elements instead of the ones
listed above:
● (10) = GS1 application identifier for the batch or lot number, followed by the batch or lot number.
● (17) = GS1 application identifier for the expiration date of the device, followed by the expiration date.
Symbol Explanation
This symbol has been replaced by the general warning sign in software version 2.0.8 or later.
General warning sign. Displays when the priority setting for Tachy/Brady PR High/Low or HR/PR
high/low, or SpO2 Low has been set to low.
Displays in the:
● Upper left corner of the screen
● Lower part of the parameter menus’ Alarms tab
● Priority column of the selected alarm in the Alarm Setup > Alarm Priorities.
According to what has been allowed in the Care Unit Settings, the selectable priorities
are:
● Escalating, High, Medium, Low, Informational, or
● Escalating, High, Medium, Low, or
● Escalating, High, Medium, or
● Escalating, High, or
● Escalating,Informational , or
● Low, Informational, or
The following menu selections apply to software version 2.0.7 or later. For earlier
software versions the explanation in the manual is still valid.
12SL-ACS is an optional higher-sensitivity analysis for the detection of acute ischemia
and acute infarction designed for a higher risk population with a higher prior
probability of having these conditions. When this setting is enabled, you will get
ACS-specific statements in addition to the diagnostic statements.
1. Select the HR parameter window.
2. Select 12 Lead Analysis.
3. Select Settings > Diagnostic Tool.
4. Select ACS or Off.
You can select the waveform filter to best suit your needs. Filter selection will affect
the waveform view and the printouts of the selected report.
Select the upper limit for the filter band:
1. Select the HR parameter window.
2. Select 12 Lead Analysis.
3. Select Filter.
4. Select a filter from the Low-pass list:
● 20 Hz
● 40 Hz
● 100 Hz
● 150 Hz.
Entropy warning
The following warning has been updated.
WARNING E-ENTROPY module is defibrillation proof up to 3 kV. Ensure
that the sensor is placed on the patient’s forehead according
to the instructions. Placing the sensor in a way other than
instructed might result in risks during patient defibrillation.
1. Paper out indicator: Illuminates when you need to replace the recorder paper.
2. Power on indicator: Illuminates when connected to power.
3. GRAPH STOP key: Press to stop printing.
4. M-port connector: Connect to the CARESCAPE Monitor B850.
5. Power switch: Press to turn on or turn off the recorder.
6. Power connector: Connect the recorder’s power cable.
Permitted disinfectants
● Ethanol max. 99.7% by volume for surfaces, excluding B850 CPU, USB remote,
M-port keypad surfaces.
● Ethanol max. 70% by volume for B850 CPU, USB remote, M-port keypad surfaces.
● Isopropyl alcohol (max. 60% by weight).
● Chloramine (max. 5% by volume).
● Glutaraldehyde (max. 2% by volume).
● Phenol (max. 2% by volume).
● Tartaric acid (75 mg per 100 ml solution).
● Sodium hypochlorite (max. 5.25% by volume mixed with H2O in ratio of 1:10). Do
not use this disinfectant for touch screen panels.
This product contains Lithium-Ion batteries. At the end of their service life, batteries
in this product must be recycled or disposed in accordance with local or national
regulations. Do not dispose of batteries as trash or unsorted municipal waste.
Requirements and services for recycling of batteries vary between countries.
● USA: You may follow the battery manufacturers instructions on the battery
to recycle it. Alternatively, you may return GE product batteries to GE for
recycling. For information about returning batteries to GE, contact your authorized
GE Service representative or contact GE Equipment Services at 1-800-437-1171.
● Canada: Contact the approved battery stewardship program in your province for
information on recycling your batteries.
● Other countries: Recycle batteries through your local, regional or national collective
scheme in accordance with your local or national regulations.
The broadcasted message NIBP MANUAL has been replaced by the message NIBP
STOPPED.
Input devices
The list of compatible devices has been updated and a list of supported devices has been
added.
The monitor is compatible with the following devices:
● 2031239-001 USB Bar Code Scanner
● 2093421-001 USB Barcode Reader and Mount
● 2022144-002 USB Mouse
● 2077698–001 USB Mouse
● 2045488-0xx USB Washable Keyboard
● 2077699–0xx USB Washable Keyboard
● 2042854–001 M-Port Keypad (B850 only)
● CARESCAPE D19KT VER01 19-inch, medical-grade display touchscreen
● CARESCAPE D19KT 19-inch, medical-grade display touchscreen
● CARESCAPE D15K 15-inch, medical-grade display keyboard
● 2039040-0xx USB Remote Control (ENG, GER, FRE, SWE, SPA, ITA, DUT, DAN, NOR, POR,
POL, CZE, FIN)
The monitor supports the following devices:
● 2030126–001 GDS 15” Touchscreen (B850 only)
● 2028679–001 USEI/DIVA 15” Touchscreen (B850 only)
● 2025280–001 USEI/DIVA 19” Touchscreen (B850 only)
The specification information regarding the supported remote clients on the CARESCAPE
Network has been modified.
Bands 2.4 GHz: The available channels for 802.11b/g operation are
channels 1 to 14 (2.4 to 2.5 GHz).
5.1 GHZ: The available channels for 802.11a operation are
channels 34 to 165 (5.15 to 5.85 GHz).
The range of 802.11b/g and 802.11a channels allowed for use in a
given country are limited by firmware.
Protocols Radio support 802.11 abg
ECG heart rate response time PDM, E-PSM, E-PSMW, E-PSMP, and E-PSMPW modules indicate a
new heart rate for a simulated step increase of 80 bpm to 120
bpm or decrease of 80 bpm to 40 bpm in < 10 s
The ST tolerance information has been added to ST numeric accuracy for software version
2.0.5 or later.
ST numeric accuracy PDM, E-PSM, E-PSMW, E-PSMP and E-PSMPW modules per EC57
(ESC database):
● ST Mean Absolute Difference < 100 µV
● ST Mean Difference (Mean error) < 50 µV
● Correlation coefficient > 0.90
● ST tolerance ±0.4 mm or 20%, whichever is greater
The PDM specifications have been updated for PDM v2.4 when used with monitor software
version 2.0.7 or later. For earlier versions, the specifications in the manual are still valid.
Pacer pulse rejection of fast ECG signals (according to PDM modules:
the test defined in ANSI/AAMI EC13 section 4.1.4.3)
● 11.1 V/s with Sensitive pacemaker detection
● 23.3 V/s with Normal pacemaker detection
E-PSM, E-PSMW, E-PSMP, and E-PSMPW modules:
● 0.5 V/s with Sensitive pacemaker detection
● 1.2 V/s with other pacemaker detection options
Admit/discharge settings
The following row in the table has been modified.
Select Monitor Setup > Parameter Setup > ECG > Advanced to adjust the following factory
default settings for the current patient.
Select Monitor Setup > Parameter Setup > Gases > CO2 > Setup to adjust the following
factory default settings for the current patient.
Select Monitor Setup > Parameter Setup > Spirometry/Gas Exchange > Setup to adjust
the following factory default settings for the current patient.
Select Monitor Setup > Parameter Setup > Spirometry/Gas Exchange > Paw Alarms to
adjust the following factory default settings for the current patient.
Select Monitor Setup > Parameter Setup > Spirometry/Gas Exchange > MV/Vent Alarms to
adjust the following factory default settings for the current patient.
Select Care Unit Settings > Telemetry to define the telemetry (combination monitoring)
settings for the care unit. The following table lists the factory default settings.
Select Care Unit Settings > Roving to define the roving settings for the care unit. The
following table lists the factory default settings.
Select Monitor Setup > Parameter Setup > ECG > Setup > 12 Lead Analysis > Settings to
adjust the following factory default settings for the current patient. The following settings
are only available with software version 2.0.7 or later.
Select Monitor Setup > Parameter Setup > ECG > Setup > 12 Lead Analysis > Filter to adjust
the following factory default setting for the current patient. The following setting is only
available with software version 2.0.7 or later.
Select Monitor Setup > Parameter Setup > SpO2 > Setup or Monitor Setup > Parameter
Setup > ECG > Setup to adjust the following factory default settings for the current patient.
Other accessories
Part Number Accessory Description Approved for use with
2009828–205 Thermal recorder paper, width 50 mm/2 in., pkg of 20 rolls PRN 50–M, PRN 50–M+,
B650, B450
www.gehealthcare.com