MEG 205 TUTORIAL 3 — EQUILIBRIUM OF RIGID BODIES
(1)_ Two crates each of mass 350kg are placed as shown in the bed of a 1400kg pick-
up truck. Figure QI. Determine the reactions at each of the 2 (a) rear wheels A (b)
front wheels B. Repeat this if crate D is removed and the position of crate C is
unchanged. (VM4.1/2) Ans: A = 6.065KN each, B= 4.23KN each.
Repeat: A = 4,892KN each, B = 3.691KN each.
(2) A 2100N tractor is used to lift 900N of gravel as shown in Figure Q2. Determine
the reactions at each of the 2 rear wheels A and front wheels B. (VM4,3).
Ans: A= 325N each, B = 1175N each.
(3) For the beam and loading shown in Figure Q3, determine the reaction at A and
the tension in cable BC. (VM4.4). Ans: A = 245N, Tac = 140N.
(4) A hand truck is used to move two kegs each of mass 40kg as shown in Figure Q4.
Neglecting the mass of the hand truck, determine the vertical force P which should be
applied to the handle to maintain equilibrium when a = 35° and the corresponding
reaction at each of the two wheels B. (VM4.7/8). Ans: P= 37.92N, B = 373.4N each,
(5) Determine the reactions at A and B when a= 180mm in Figure Q5. (VM4.61).
Ans: A= 400N, B= SOON at -53.13°.
(6) The man in Figure Q6 is holding the 200N drum in equilibrium at the point
(2, 1)m with a force parallel to the plane at the point of contact. If friction is
negligible, determine the force exerted by the man. Ans: 141.4N.
(7) A 2m rod of uniform cross section is held in equilibrium as shown in Figure Q7
with one end against a frictionless, vertical wall and the other end attached to a cord.
Determine the length of the cord. Ans: 2.645m,Q 2°05 Tutor 2 sreTcHes
—— x 9 —— 3 Bow
=
c Ir
Mee
711 C oferr
Le
Rpt Qh
| Poon)
aN
\
4
|
See, 7 eH
Pee Se af
Kyun Q2 : :
\br) Don)
5 b5n or \S5N
6-8 sleek le 6-5}
&
TF Cc
1
hypore QsToler fe
oe NT RL PE EOE A ee
ial :