Professional Documents
Culture Documents
Fiberline Catalogue KADANT
Fiberline Catalogue KADANT
Kadant Inc. is a leading supplier of technology-based systems for the global pulp and
paper industry as well as other process industries. Our equipment plays a critical role
in nearly every stage of paper making and paper recycling, enhancing process
efficiency and product quality for our customers.
About Kadant
For more than a century, Kadant Inc. has been delivering smart and efficient solutions to process industries. As a global leader
in fiber processing, fluid handling, water management, and doctoring systems, we design and manufacture products used in
industries ranging from paper to plastics and textiles to tires.
At Kadant, we are proud to offer innovative products and technologies that help reduce energy consumption, improve water
management, and enhance efficiencies for long-term sustainability. Kadant brand products and services are sold to industries
worldwide through our subsidiaries located in more than 16 countries. Our approach is simple: know our customers,
understand their process, and use our specialized expertise to deliver the right solutions.
PRIMARY MARKETS
PETRO CHEMICAL
SYNTHETIC FIBER
TIRES / RUBBER
AUTOMOTIVE
ALTERNATIVE
CONVERTING
PROCESSING
ALUMINUM
KADANT PRODUCTS
MATERIAL
BUILDING
PLASTICS
TEXTILES
ENERGY
MINING
PAPER
FOOD
STEEL
AIR UNIONS
FILTERS
LIQUI-MOVER® PUMPS
PULPERS
ROTARY UNIONS
SCREENS
SCREW PRESSES
SHOWERS / NOZZLES
STEAM JOINTS
THERMOCOMPRESSORS
VACUUM BREAKERS
innovation
A component for a rotary union used for fluid transfer in the rubber and plastics
industries undergoes testing in a coordinate measurement machine to check that all
dimensions meet the precise specifications required for Kadant’s products used on
mixing and calendering applications.
Creating the future
While most suppliers are preparing for the future. Kadant is
creating it. Kadant’s research and development activities are the
force behind the patented technologies and innovative products
that we bring to papermaking and to other process industries
worldwide.
Research and
Development
With major R&D facilities in Europe and the USA, Kadant is
uniquely positioned to address process industry challenges and
needs for improved fiber processing, heat transfer, doctoring, and
fluid handling. In addition to internal product development
activities, our research centers allow customers to simulate their
own operating conditions and applications to identify and
quantify opportunities for improvement.
technology
Screening is a key step in the stock preparation process to remove contaminants
while improving sheet cleanliness and formation. The SPH screening system is a
high-efficiency centripetal design that leaves minimal deposits inside the screen and
virtually no stringing on the accept side. In addition, the low pulsation levels and
long basket life make the SPH series a highly preferred pressure screen in approach
flow applications.
Fiber processing
solutions
Stock Preparation
For more than 130 years, Kadant’s fiberline group has led the
industry in innovative fiber processing solutions. We are proud of
our heritage and ability to deliver cost-effective solutions for
recycling, approach flow, and dewatering systems. Our
comprehensive product mix of pulping, screening, cleaning,
deinking, and washing systems for quality fiber processing is
based on more than a century of expertise. And that means you
can count on Kadant’s know-how and application expertise to
deliver efficient solutions for your fiber processing needs.
pioneering
Effective doctoring results from using the right doctor blade, holder, blade angle,
pressure, and alignment in a particular position. Because of the wide variety of blade
materials available, the roll material and location of the roll in the process requires
deep application expertise to ensure proper blade selection for optimal doctoring.
Doctor blades, holders,
systems
Doctoring Systems
Building on the innovative brands of Vickery, Lodding,
and Web Systems, Kadant is recognized as a leader in the
development and manufacture of doctor blades, blade holders,
and doctor systems. We offer a wide range of patented metal and
synthetic blades for application-specific installations, and a full
line of profiling equipment for curl control and improved
moisture profiles during coating, laminating, printing, and
sheeting processes.
solutions
Rotary joints and unions are used in a variety of process industries to provide a
mechanical seal between a stationary supply pipe and a rotating drum or cylinder
to permit the flow of heat transfer media into and/or out of the rotating roll. Heat
transfer media typically used with rotary joints include steam, water, thermal oil,
hydraulic oil, and coolant.
Rotary joints, unions,
accessories
Kadant rotary joints, also referred to as rotating unions and
precision unions, are mechanical seals that connect rotating
Fluid Handling
cylinders to fixed piping to transport steam, water, thermal oil,
coolant, hydraulic oil, and other media into and out of the roll.
efficiency
VersaKleen™ traversing shower systems are designed for effective cleaning of forming,
pressing, and dryer fabrics. The high-pressure, low-volume nozzles provide thorough
and efficient cleaning using less water than full-width showers, minimize mist, reduce
water load in press nips, and eliminate wet streaks on dryer fabrics.
Shower, filtration, and
Water Management
forming systems
Cleaning, conditioning, filtration, and forming products make up
our water management product offerings. Kadant’s application
expertise in spraying technologies and liquid filtration provides our
customers with the products, services, and tools needed to address
manufacturing challenges.
expertise
Kadant’s MAC Cell flotation de-inking system uses air bubbles to float ink particles to
the cell surface for removal from the recycled material. The latest generation of the
MAC Cell de-inking system incorporates our patented bubble-washing process to lower
power consumption and reduce fiber loss.
Global coverage
Many suppliers have made a commitment to the international
marketplace, but few have taken that commitment as far as Kadant.
Our global presence means you can count on Kadant’s application
expertise and advanced technologies to help solve your manufacturing
challenges no matter where you are. And to assure product and service
Local Service,
availability wherever it’s needed, Kadant has established subsidiaries in
Asia, Europe, North America, and South America for a quick response
to your needs.
Worldwide
Kadant manufacturing centers
All Kadant brand products and services are made available through our
subsidiary companies. Visit www.kadant.com to find your local Kadant
business or for additional company or product information.
responsive
Kadant Inc.
One Technology Park Drive
Westford, MA 01886 USA
www.kadant.com
KAI-3000 03/2008
replaces: New
© 2008 Kadant Inc.
Kadant Inc. is a leading equipment manufacturer
for the worldwide papermaking and paper
recycling industries.
2
KADANT WORLDWIDE PRESENCE
Kadant has a worldwide presence and a global
strategy within the pulp & paper industry.
3
KADANT STRUCTURE
4
KADANT IN FACTS
• 2007 Revenue $ 366.5 m
• 2007 Operating Income $ 37.0 m
• R&D $ 3.0 m
• 2 000 people in 16 countries
• Trades in New York Stock Exchange
• A very sound financial situation
• www.kadant.com
5
KADANT LAMORT
IN FRANCE
6
KADANT LAMORT IN FACTS
7
KADANT LAMORT HISTORY
• 1750 PRINTER
• 1800 WALL PAPER MANUFACTURER
• 1810/1914 PAPER MANUFACTURER IN LUXEMBOURG & FRANCE
• 1908 E. & M. LAMORT CREATED FOR SELLING AND MANUFACTURING
THE FIRST SCREEN IN THE WORLD
• 1951 LICENSE FROM LODDING ACCESSORIES, ALL FOR PAPER
MACHINE IN EUROPE
• 1990 E. & M. LAMORT ACQUIRED BY THERMO ELECTRON
• 1991 THERMO ELECTRON CREATED THERMO FIBERTEK DIVISION.
E & M. LAMORT IS A DIVISION OF THERMO FIBERTEK
• 1994 ACQUISITION OF VICKERY BY THERMO FIBERTEK
• 1995 ACQUISITION OF AES BY THERMO FIBERTEK
• 1997 ACQUISITION OF BLACK CLAWSON BY THERMO FIBERTEK
• 2000 ACQUISITION BY LAMORT OF CYCLOTECH (CLEANERS)
• 2001 THERMO FIBERTEK IS SPAN OUT OF THERMO ELECTRON AND,
AS AN INDEPENDANT COMPANY, RENAMED KADANT; LAMORT AS
WELL AS OTHER COMPANIES RENAMED AS OF 2001 END
• 2005 ACQUISITION OF JOHNSON BY KADANT
8
KADANT PRODUCTS
Stock Preparation Products sold by Kadant Lamort
and Kadant Black Clawson
• Pulper high and low consistency
• Detrasher and reject compactor, cutting valve, Ragger
• Screening: medium consistency coarse screen, low consistency pressure
screen, reject / tailing screen, vibrating screen
• Screen Basket (holes / slots)
• Cleaning: high density cleaner, low consistency
forward/reverse cleaner, Gyroclean
• De-inking cell (Mac Cell)
• DNT washer
• Thickening: water extractor, Trommel, mould vat thickener, screw press
• Low-speed Disperger
• Propeller / Chest / HD tower
• Pump
• Reject handling and water treatment : compactor, dewatering screw,
Sand separator, Poseïdon PPM / Saturn Clarifier, in-line filter, Gravity
and vacuum strainer
• Disc Filter
9
KADANT PRODUCTS
Paper Machine Products sold by Kadant Lamort,
Kadant UK, Kadant Web Systems and Kadant AES :
• Doctoring
• Creping
• Conditioning
• Forming
• Profiling
• Filtration
10
KADANT LAMORT R&D
11
KADANT LAMORT WORKSHOP
12
KADANT LAMORT MANAGEMENT
A. SERRES
President
13
Fiberline
Kadant is the industry leader
Kadant Lamort is
Kadant Center for
Stock Preparation for
Virgin and Recycled
Cellulose Fibre used in
packaging, printing,
writing, tissue and
special grades.
Through an
international network,
Kadant Lamort has
become, within the
papermaking industry,
one of the key
participants in global
interchanges for stock
preparation equipment
and systems.
X X Hydrapulper
®
EU/REU • Batch or Continuous vertical pulper - typic. 4 to 6%
Pulping
®
X Hydrapulper DR • Continuous vertical pulper - typically 6 %
X Vorto rotor - Maximizer bedplates • OCC low-consistency continuous pulpers
X X X Helico Pulper • Batch pulper at high consistency - virgin pulp or waste papers
X X X Midcon Pulper • Batch pulper at medium consistency - typically 8 %
X X X Agi-PulperTM • Wet end cross shaft horizontal broke pulper
X X X KF DesintegratorTM • Wet end horizontal broke pulper
X X X SydrapulperTM • Single or dual rotor horizontal broke pulper
Working principle
The tangential inlet accelerates the stock and gives it a downward centrifugal motion.
Impurities with high specific gravity are forced to the outer wall of the cone and
downwards to be collected in a trap from where they are isolated and removed throught
a valved chamber with intermittent discharge.
The cleaned stock rises through the middle of the vortex towards the outlet.
Water injection at the base of the cone maintains the Vortex action and aids fibre
separation / revovery.
www.kadant.com
Contact us:
KADANT LAMORT
39, rue de la Fontaine Ludot
BP 30046
51302 Vitry-le-François cedex
Flow Inlet pressure Pressure drop France
Model a b c e f h ND1 ND2 ND3
(l/min) (bar) min.-max. (bar) min.-max.
Tel: +33 3 26 74 80 80
LA150-600 600 2 - 3,5 1,5 - 2 Fax: +33 3 26 72 08 33
370 1380 340 390 217 2677 150 150 250
LA150-800 800 2 - 3,5 1,5 - 2
info@kadant.com
LA200-1300 1300 2 - 3,5 1,5 - 2
280 1550 370 350 164 3157 200 200 300
LA200-1800 1800 2 - 3,5 1,5 - 2
©
Kadant 2008 - PP0012 rev. 0
The information in this document is subject to change
without notice.
MB-352-C
XTREME™ Cleaners
FEATURES/BENEFITS
XTREME™ Cleaners
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
MB-323-D
Accepts
Feed
FEATURES/BENEFITS
Rejects
3’’ Ultra-Clone™ Fine Forward Cleaner
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
MB-283-A
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
The Third Generation
Cleaner programme.
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
LiquidCyclone™ / Ruffclone™
APPLICATIONS
FEATURES / BENEFITS
LiquidCyclone™ / Ruffclone™
OPERATION
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
80-SBA
D N T washer
DIVISION
Kadant Lamort
33700 MERIGNAC France KADANT LAMORT
Tel. : +33 (0)5.57.92.16.00 B.P. 46
Fax : +33 (0)5.56.47.84.64 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
MB-355
www.kadanteurope.com
LaDIF Disc Filter
Kadant Lamort Disc Filter
Applications
Features
Inlet box
Dearation of the inlet flow is effectively carried out with
floating baffles, one for each disc
Centre shaft
Unique design to stand for the highest mechanical forces
Filtrate valve
Designed to create the highest possible vacuum. Safe
sealing against air leakage (super clean filtrate in option)
Shower System
C-nozzles used for pulp knock-off sluicing and cleaning
shower are cleanable during operation of the filter
Benefits
The LaDif 5,2 and 3.7 series are designed for both save all and Accessibility and environment
thickening applications and can be delivered with up to 1020 m² - By using the “during filter in operation” cleanable nozzle,
installed filtering area. Other series are available. the pulp is knocked off and the cleanness of the filter area is
maintained.
Kadant Lamort solutions of known problems are: These features give high accessibility and an environmental
Capacity friendly equipment.
- By optimising the dearation of the inlet pulp flow between
each disc with the new unique floating overflows, the air
content in the pulp suspension is kept to a minimum.
- By reducing the internal volumes of the disc sectors to the
optimum, they drain quickly during the drying of the pulp mat,
which allows higher rpm of the disc.
- By the new unique design of the filtrate valve, with separate
air removal, a high and stabile vacuum is achieved.
These features give the highest possible capacity.
Filtrate quality
- By optimising the distribution of the inlet pulp flow along the
whole length of the disc filter with a stationary
baffle, the pulp consistency is the same to all discs.
- With smaller internal volumes in the disc sectors, a smaller
volume of unclear filtrate is carried over from the cloudy to the
clear filtrate.
Dewatering
- By designing each centre shaft flow channel according to the
application and current flow, it is possible to create the best
process results.
These features give the cleanest possible clear filtrate.
Outlet consistency
- By making the internal volumes of the disc sectors smaller, they
empty quickly when they leave the suspension and drying of
the pulp mat is carried out, this gives a longer thickening time.
- By the new unique design of the filtrate valve, with separate
air removal, a high and stabile vacuum is achieved.
These features give the highest possible outlet consistency.
LaDIF 5.2
www.kadanteurope.com
Contact us:
KADANT LAMORT
39, rue de la Fontaine Ludot
BP 46
51302 Vitry-le-François cedex
France
Tel: +33 3 26 74 80 80
Fax: +33 3 26 72 08 33
informations@kadanteurope.com
©
Kadant 2007 – ref. PP0007 rev. 00
The information in this document is subject to change
without notice.
SCREW PRESS
TYPE VP 35 - VP 45 - VP 60 - VP 80 - VP 100
• Easy access.
FEATURES / BENEFITS
Hy-Tec™ Pressure Knotter
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
Kadant Black Clawson
DIVISION
Kadant Lamort
33700 MERIGNAC France KADANT LAMORT
Tel. : +33 (0)5.57.92.16.00 B.P. 46
Fax : +33 (0)5.56.47.84.64 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
LICENSOR QUALITE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
MB-352-C
Model D Hydrapulper®
Pulping Machine and D-Chord™
Baffle Retrofit
Model D Hydrapulper®
Pulping Machine and D-Chord™
Baffle Retrofit
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
Vorto & Maximizer
rotor bedplates
The Kadant VORTO rotor and MAXIMIZER bedplate combination offers an important
technological evolution for OCC pulping.
France
ASSURANCE
www.kadant.com
PPM Clarifier ®
SATURN Clarifier ™
Poseïdon license
APPLICATIONS
The Kadant Lamort Poseïdon PPM
Clarifier® and SATURN Clarifier™ provide
cost efficient water treatment for:
• Mill effluent
- primary treatment
- secondary treatment
• Fiber Recovery (Saveall)
• Deinking Greywater Kadant Lamort PPM Clarifier™
• Reject Clarification or Thickening
• White water & washer filtrate
• Micro Stickies and Wax Removal
• Filtrate Polishing
OPERATING PRINCIPLES
The Kadant Lamort Poseïdon A small portion (typically 10-20%) The modular design allows for
flotation units use, in a very innovative of the treated water is recirculated, tremendous operating flexibility and
and exclusive way, the well known and mixed with air and pressurised capacity an be increased by simply
principle of dissolved air flotation to to dissolve the air required for sepa- adding modules.
separate particles from water. The ration. The unique Kadant Lamort
raw water to be treated is fed to the Poseïdon method of dissolving air The Kadant Lamort Poseïdon PPM
unit and mixed with recirculated water produces very small microbubbles, Clarifier® and Saturn Clarifier™ utilise
containing all the microbubbles thereby ensuring that the buoyancy the principle of intermediate capture
required for the flotation. of particles of all sizes increases surface zones to obtain an extremely
Heavy, non-floatable particles settle uniformly. This characteristic, low overflow rate.
into sludge cones at the inlet of the achieved by the patented Poseïpump™, The low overflow rate (l/min per square
unit. Lighter particles are separated leads to efficiencies far exceeding meter of surface area) results in a
in two steps. Fast-rising particles rise conventional dissolved air flotation minimum polymer usage.
and form the sludge layer. Small, clarifiers performances.
slow-rising particles are intercepted ***DIMENSIONS ***WEIGHT (kg)
within the intermediate capture surface *MODEL
LENGTH WIDTH HEIGHT EMPTY FILLED
zone, where floc size and buoyancy PPM50B 50 to 75 4150 3040 3915 3200 16500
increase until they also rise to the
PPM100B 75 to 150 5750 3040 3915 4300 26000
sludge layer.
PPM200E 200 6770 3661 3915 3800 31600
The floated sludge is thickened using
PPM300E 300 8470 3661 3915 5000 45000
a unique system to greatly decrease
PPM400E 400 9970 3911 3915 6000 56000
its water content. An integral scraper
PPM500E 500 9970 4711 4095 7200 73200
removes the thickened sludge to a
PPM600E 600 10100 5380 3915 8000 75000
hopper.
PPM750E 750 12000 5380 3915 10500 110000
* Models larger than PPM 900 E available. Contact Kadant Lamort for details.
** Capacity depends on characteristics of water to be treated
*** Dimensions & weight are subject to change without notice. The Poseïpump™ is not included
in these dimensions.
HIGH PERFORMANCE
• High TSS capture rate (95% or better)
• High sludge consistency (up to 12%)
• High water yield (up to 98%)
• Easily handles upstream variations in flow
rate and feed concentration
• Capacity increases through addition of a
supplementary module
Conventional DAF
• Significant polymer savings Clarifier
Saturn Clarifiers™
Type S 600
DIVISION
Kadant Lamort
33700 MERIGNAC France KADANT LAMORT
Tel. : +33 (0)5.57.92.16.00 B.P. 30046
Fax : +33 (0)5.56.47.84.64 51302 VITRY-LE-FRANCOIS Cedex QUALITY
France
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Cyclotech, Sweden To find your local contact, refer to:
m
2100
210
R
S
3147 Kadant supplies a range of systems
3750 for stock preparation, sheet
formation, fabric conditioning,
2430 water filtration, and doctoring.
˜ 865
www.kadant.com
Contact us:
KADANT LAMORT
39, rue de la Fontaine Ludot
BP 30046
Motor 51302 Vitry-le-François cedex
Example for
Pipes France
SG 3000 M m
Tel: +33 3 26 74 80 80
Power 4 kW 15 W E Inlet 400 mm
Fax: +33 3 26 72 08 33
16’’
info@kadant.com
50 Hz - 1500 tr/min 50 Hz - 1500 tr/min 1175 X 950 mm
Speed S Outlet
60Hz - 1800 rpm 60Hz - 1800 rpm 47’’ x 38’’
575 x 2250 mm
Mounting B5 / R Rejects
23’’ x 90’’
Empty weight less motor : 2800 kg • Total weight in operation : 5300 kg
©
Kadant 2008 - PP0013 rev. 0
The information in this document is subject to change
without notice.
MB-328-B
M-14
M-15
FEATURES/BENEFITS
M14 and M15 Automatic Raggers
M-14
M-15
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
HYDRAPURGE™
Detrashing System
Ideal for medium
to large capacity systems
Features / Benefits
KADANT LAMORT
39, rue de la Fontaine Ludot
BP 30046
51302 Vitry-le-François cedex
France
Tel: +33 3 26 74 80 80
Fax: +33 3 26 72 08 33
info@kadant.com
©
Kadant 2008 - PP0014 rev. 0
The information in this document is subject to change
without notice.
MB-313-B
FEATURES / BENEFITS
Rag Rope Cutter
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
MB-295-B
FEATURES
• Low headroom requirements - minimal or no pit required when installed under paper
machine
• Available in two sizes - 33” / 36” for up to 500 t/d and 42“ / 45“ for up to 1 200 t/d of
machine production
• Can handle, without restriction, up to 30’ wide sheet under continuous full break
conditions; in most instances the need for chute extensions to cover span of existing
broke slots can be eliminated
• Ability to handle heavy weight slabbing with specially designed cross shaft fabrication
• Defibering vane split to facilitate replacement or repair without removing cross shaft
• Can be installed in a metal or tile chest either in the machine direction or across
machine direction
• Fabricated trough type tub design provides for minimum tub deflection
• Furnished with “eyebrow” baffle over the rotor to minimize splash and improve stock
submergence at rotor zone
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
MB-281-A
www.kadanteurope.com
MB-273-A
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
LAM' DEINKIT
A N A C C E N T O N I N N O VAT I O N
LAM' DEINKIT
FITTING OF HYPERFLOTATION
LAM' DEINKIT
DIVISION
Kadant Lamort
33700 MERIGNAC France KADANT LAMORT
Tel. : +33 (0)5.57.92.16.00 B.P. 46
Fax : +33 (0)5.56.47.84.64 51302 VITRY-LE-FRANCOIS Cedex QUALITY
France
ASSURANCE
LICENCIE QUALITE
FILIALES
Kadant Lamort GmbH, Allemagne
Kadant Lamort SA, Espagne
Kadant Lamort S.r.l., Italie
Kadant Lamort Ltda, Brésil
Kadant Cyclotech, Suède Pour trouver votre contact :
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
CLEANING POIRE
A N A C C E N T O N I N N O VAT I O N
CLEANING POIRE
CLEANING POIRE
Kadant Lamort
Poire Pulper
installed on a
vertical pulper
DIVISION
Kadant Lamort
33700 MERIGNAC France KADANT LAMORT
Tel. : +33 (0)5.57.92.16.00 B.P. 46
Fax : +33 (0)5.56.47.84.64 51302 VITRY-LE-FRANCOIS Cedex QUALITY
France
ASSURANCE
LICENCIE QUALITE
FILIALES
Kadant Lamort GmbH, Allemagne
Kadant Lamort SA, Espagne
Kadant Lamort S.r.l., Italie
Kadant Lamort Ltda, Brésil
Kadant Cyclotech, Suède Pour trouver votre contact :
DUMP TO PUMP
APPLICATIONS
FEATURES
• Batch Operation - works equally well on either partial or full batch. Perforated bedplate ex-
tends beyond the ends of the rotor vanes to facilitate dumping
• Perforations in bedplate can be any size (as small as 1/8”) commensurate with capacity
and defibering requirements.
• Batch stock consistencies up to 8% (higher on some furnishes) can be handled with ease.
SPECIFICATIONS
• Available in welded steel tub. Special corrosion resistant tubs of tile or stainless materials
can be furnished.
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
MB-230-B
The Kadant Black Clawson Sydrapulper™ is a low headroom pulper with the rotor
and bedplate mounted in the side of a steel, concrete, or tile tub or chest. It is
available for either batch or continuous operation and is particularly well suited for
use under the paper machine as a broke pulper.
Sydrapulper™ Side Driven Pulper
FEATURES
• BATCH OPERATION - provides fast, efficient defibering with the Vokes™ rotor-
bedplate combination; dumps through a single extraction plate in the bottom of the tub
• Bedplate perforations can be any size commensurate with capacity and defibering
requirements; perforations for broke pulping applications are usually 5/8” diameter
• Low headroom requirements - minimal pit depth; often no pit is required when installed
under a paper machine
• Can handle full machine break production on any size paper machine
• Vokes rotor or Powr Savr rotor unit assemblies, sized to meet any pulping requirement,
are available in 24”, 33”, 42“, 50” and 60” diameters depending upon application
• Unique eyebrow over rotors minimizes splash and improves stock submergence at
rotor zone
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
MB-318-D
FEATURES/BENEFITS
DETRASHING CYCLE
Hydrapurge™ III Batch Pulper
Detrashing System
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
MB-312-E
Hi-Con™ Pulper
Hi-Con™ Pulper
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
77-SBA
Excellence In
Disc Refiner Technology
DIVISION
Kadant Lamort
33700 MERIGNAC France KADANT LAMORT
Tel. : +33 (0)5.57.92.16.00 B.P. 46
Fax : +33 (0)5.56.47.84.64 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
LICENSOR QUALITE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
60-SBB
HYDRAFLAKER
Hydraflaker™ - Hydraulic Deflaker
Hydraflaker Dimensions
DIVISION
Kadant Lamort
33700 MERIGNAC France KADANT LAMORT
Tel. : +33 (0)5.57.92.16.00 B.P. 46
Fax : +33 (0)5.56.47.84.64 51302 VITRY-LE-FRANCOIS Cedex QUALITY
France
ASSURANCE
LICENSOR QUALITE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
MB-312-E
Hi-Con™ Pulper
Hi-Con™ Pulper
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
77-SBA
Excellence In
Disc Refiner Technology
DIVISION
Kadant Lamort
33700 MERIGNAC France KADANT LAMORT
Tel. : +33 (0)5.57.92.16.00 B.P. 46
Fax : +33 (0)5.56.47.84.64 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
LICENSOR QUALITE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
60-SBB
HYDRAFLAKER
Hydraflaker™ - Hydraulic Deflaker
Hydraflaker Dimensions
DIVISION
Kadant Lamort
33700 MERIGNAC France KADANT LAMORT
Tel. : +33 (0)5.57.92.16.00 B.P. 46
Fax : +33 (0)5.56.47.84.64 51302 VITRY-LE-FRANCOIS Cedex QUALITY
France
ASSURANCE
LICENSOR QUALITE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
MB-318-D
FEATURES/BENEFITS
DETRASHING CYCLE
Hydrapurge™ III Batch Pulper
Detrashing System
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
MB-344-D
FEATURES/BENEFITS
APPLICATIONS
OPERATION
UltraSorter™ Reject Processor
TYPICAL COARSE
SCREENING LOOP
(BROWN GRADES)
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
ECODRUM - CONICDRUM
PULPERS DETRASHING
A N A C C E N T O N I N N O VAT I O N
ECODRUM & CONICDRUM
PULPERS DETRASHING
ECODRUM is inclined, with the loading mouth directly in contact with the ditch of channel
for collecting the waste from one or several pulpers. Thanks to Ecodrum inclined position,
water drainage, contaminant washing, lifting and transport stages can be carried out
simultaneously, thus facilitating the feeding of the compactor(s).
CONICDRUM is horizontal, with the loading of the mouth connected directly to the base of the
pulper. Thanks to the special conical final shape, drum capacity is greater and the retention
of waste inside the drum is increased, allowing optimised washing and reduced fiber losses.
The type of machine to be installed depends on the existing plant layout and on available
space. Before any machine is supplied, it is necessary to study all required layout and
process parameters in order to define the most appropriate equipment and subsequent
sizing.
EXAMPLE OF
OPERATION
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex
Fax : +33 (0)5.56.47.84.64 France QUALITY
ASSURANCE
A N A C C E N T O N I N N O VAT I O N
ECOVIS
DEWATERING SCREW
There are perforated plates in the lower part of the collector, which allow the discharged water and
the impurities to drain away. A shaftless screw in very thick carbon steel is mounted inside the
collector.
Because the ECOVIS is so versatile, it will reduce the cost of constructing waste disposal systems
as it facilitates the feeding of the compactors which, in their turn, significantly reduce the volume of
contaminants and the amount of water they contain, making disposal costs considerably less.
The machine can be mountled either horizontally or inclined with a variable slope of up to 30° in a
fixed or adjustable position. Size and light weight imply that the ECOVIS can be installed in reduced
areas without specific requirement for foundation works.
The ECOVIS is supplied in different sizes and can be adapted to suit all types of installation and
working conditions. A detailed study is made for each application in order to adapt it to the plant
requirements.
The machine is delivered ready for operation and comes complete with a motorised reduction gear
and control panel with programmable operating functions.
Screw
Screw
Screw
Outlet
Charging
hopper
Basin with
perforated plate Motor
for water discharged
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex
Fax : +33 (0)5.56.47.84.64 France QUALITY
ASSURANCE
A N A C C E N T O N I N N O VAT I O N
ECOFILTER
SEPARATOR FILTER
Applications include:
For each application, different types of AISI 304 or 316 stainless steel wires are used in sizes that are
determinated by the type of liquid to be treated and the level of filtration required. A fixed or oscillating
spray with fan-effect nozzles fed by clarified water at 3 bar ensures that the wires are cleaned
perfectly.
ECOFILTER comes in two basic models and three different lengths, as shown in the table below:
• IS with a single drum, 1000 - 2000 - 3000 mm in length
• ID with a two drums, 2000 - 3000 mm in length
Construction in AISI 304 or 316 stainless steel, the device is supplied complete with pendulum reduction gear,
watertight support wheels and central greasing system.
On request, the device can be fitted with a collector for accumulated material and a collection bath for the
clarified waters.
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex
Fax : +33 (0)5.56.47.84.64 France QUALITY
ASSURANCE
• High consistencies
• Compacted material easy to transport and lift
• Easy to install even in particularly difficult locations
• Robust and simple construction
• High reliability and low maintenance
• Operation by hydraulic-oil pump unit
A N A C C E N T O N I N N O VAT I O N
ECOCOMPACT
WASTE COMPACTOR
There are three versions of the ECOCOMPACT which vary in compacting capabilities, compression
values and production levels, as shown in the table below. All models are build in sheet steel and
hot-galvanised carbon steel or in AISI 304L and 316L stainless steel.
The equipment is supplied complete with an hydraulic oil pump unit with two motors and two pumps for
the independent supply of the compacting and counterpressure circuits.
A control panel with all the electrical equipment required to operate the motors is supplied with a PLC
and keyboard for the management of the programmed work cycles.
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex
Fax : +33 (0)5.56.47.84.64 France QUALITY
ASSURANCE
www.kadanteurope.com A N A C C E N T O N I N N O VAT I O N
ECOREJECT-V
SCREW PRESS FOR REJECTS
A N A C C E N T O N I N N O VAT I O N
ECOREJECT-V
SCREW PRESS FOR REJECTS
Inlet
Reducer Inlet
Basket
Flap
Drive
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex
Fax : +33 (0)5.56.47.84.64 France QUALITY
ASSURANCE
www.kadanteurope.com A N A C C E N T O N I N N O VAT I O N
ECOSEWER
Removal of large contaminants from sewer waters
A N A C C E N T O N I N N O VAT I O N
ECOSEWER
Removal of large contaminants from sewer waters
DIVISION
Kadant Lamort
33700 MERIGNAC France KADANT LAMORT
Tel. : +33 (0)5.57.92.16.00 B.P. 46
Fax : +33 (0)5.56.47.84.64 51302 VITRY-LE-FRANCOIS Cedex QUALITY
France
ASSURANCE
AGENTS QUALITE
More than thirty agents all over the world Fax : +33 (0)3.26.72.08.33
informations@kadanteurope.com
SUBSIDIARIES www.kadanteurope.com
A N A C C E N T O N I N N O VAT I O N
SEPARSAND
SAND AND HEAVY MATERIAL SEPARATOR
The strainer water is then skimmed off and reused of subjected to further treatment.
SEPARSAND is built in AISI 304 or 316 stainless steel, whereas the screw is normally made in mild
steel. The drive system has a reducer gear with low revs output.
We propose three sizes based on the flow to be treated, as shown in the chart below.
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex
Fax : +33 (0)5.56.47.84.64 France QUALITY
ASSURANCE
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
SPH
Headbox screen
A N A C C E N T O N I N N O VAT I O N
SPH
Headbox screen
SPH
Headbox screen
SPH
Headbox screen
DIVISION
Kadant Lamort
33700 MERIGNAC France KADANT LAMORT
Tel. : +33 (0)5.57.92.16.00 B.P. 46
Fax : +33 (0)5.56.47.84.64 51302 VITRY-LE-FRANCOIS Cedex QUALITY
France
ASSURANCE
LICENSEE QUALITE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
ScreenONE™
Screening System
3-stage in ONE
Dilution R
Applications REJECT
Features
Benefits
ScreenONE™ is a flexible and compact fine slot screen Kadant’s patented Intermediate De-flocculation Device
with three stages in one machine. with Dilution™ (ID3™), the stage one reject reaches the
At medium consistency it develops a high efficiency at second zone under ideal conditions to optimise the
remarkable low reject rate and low energy consumption. screening operation in terms of throughput and
ScreenONE™ can operate on any type of furnishes, efficiency.
whether in stock preparation, broke application,
approach flow system at medium consistency without any The same principle is applied with a second ID3™
additional thickening. between the second and the third zone. Thanks to ID3™,
separation between fiber and contaminants is extremely
Applications efficient.
The ScreenONE™ concept and its specific control package The screen cylinder is a modular cylinder basket, allowing
make this 3-stage screening plant easy to operate under high flexibility in configuration.
continuously optimised conditions. The machine is fitted with our new design K closed rotor
which allows high sticky removal and very low energy
consumption.
Working principle
The pulp is fed from the bottom into the first stage, Maintenance
which is sized and designed to get the full use of the total The fine slot screen cylinder is a modular screen basket
basket length. with wedge-wire elements easily adaptable and
removable with extremely high flexibility in
configuration.
ScreenONE™ Screening System
www.kadant.com
Contact us:
KADANT LAMORT
39, rue de la Fontaine Ludot
BP 30046
51302 Vitry-le-François cedex
France
Tel: +33 3 26 74 80 80
Fax: +33 3 26 72 08 33
kadant.lamort@kadant.com
©
Kadant 2009 – ref. PP0002 rev. 01
The information in this document is subject to change
without notice.
K-TEK™ Screen Cylinder Screen Cylinders
www.kadant.com
Contact us:
KADANT LAMORT
39, rue de la Fontaine Ludot
BP 30046
51302 Vitry-le-François cedex
France The Best Choice in Screen Cylinders
Tel: +33 3 26 74 80 80
Fax: +33 3 26 72 08 33
CUSTOMER SERVICES HOTLINE kadant.lamort@kadant.com
Kadant invented pressure screening, so we understand Cylinder and Rotor Combinations… Engineered to
your process as well as your business. Back in 1939, Perform
Kadant (Black Clawson) patented the first pressure screen. The design of the rotor and cylinder set directly influences
the ultimate performance of the pressure screen. Our
Since then, we have developed more technological
engineers understand how to optimize a screening system
breakthroughs in screening than anyone else, including and have designed cylinders and
the most advanced screen cylinder rotors to meet any of your fiber and
designs available. When you pulp product quality needs. By the
buy K-TEK screen cylinders, you proper application of screen cylinders
own our engineering expertise, and rotors, we are able to get the PH LIQUI-FILTER UP PHC
our experience and the best performance that you require.
performance and runnability in the
business. Research & Development
We hold more screen cylinder
Technology Source patents than any of our
We have always designed and utilized our own patented competitors. In short, we are
screen cylinder technology in the pressure screens we have the origin of screen cylinder
supplied. Our cylinder designs are proven in our own pilot technology and development.
plant that uses full-scale pressure screens. We have completed literally PHL PHS PHP PS
thousands of screen trials
Value and demonstrations on every
We know that your cost of operations depends on getting conceivable type and variety of papermaking fiber. We
the best price from your vendors, but we also know that the continue to be committed to our research and development
cost of failure is much higher than the price of the product. program, believing that we have an ongoing responsibility
That is why the value of a Kadant cylinder to you is not the to lead the industry in the technology of pressure screening.
price you pay, but rather the service and process knowledge
you receive when you buy from us. Service and Support
Kadant field sales and service PSL PSP PSS COBRA
Ultra™ Screen
For Pulp and
Paper Mill Applications
Ultra™ Screen
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
FiberNET™
ID TECHNOLOGY INSIDE
Features
Benefits
Now, you can solve the dilemma between quality and fibre loss.
Directly derived from Kadant R&D work, FiberNET™ is Fibres from reject are then washed by water added in
a revolutionary combination of several highly advanced the second zone of the FiberNET™.
concepts and features, including IDD™ technology. This allows to operate with almost fibre free
continuous reject.
Applications FiberNET™ is a two stage screen with two accepts A1
FiberNET™, a multi-purpose two stages continuous reject and A2 due to high efficiency A1 and/or A2 accepts
screen, operating with fine slots at medium or low can be forwarded.
consistency, is concentrating contaminants in the reject The fine slot screen cylinder is a multi-life rigid cage
flow with minimal fibre loss. screen cylinder with wedge-wire elements easily
The remarkable FiberNET™ efficiency makes it suitable adaptable and removable with extremely high flexibi-
for use in position such as : lity in configuration.
The machine is fitted with a specifically designed Low
last stage in stock preparation or approach flow Energy K-Rotor for high sticky removal and very low
screening systems operating on furnish with high energy consumption.
contaminant content,
unique reject screen with two accepts, performing
high fibres and water saving, even with dirty long
fibre furnishes, and adding screening capacity to the
system,
single machine in a reject centralised line to recover
more than 90 % of fibers. Fibers obtained are cleaned
enough to be fed back in some last stage of stock
preparation process.
Working Principle
The pulp is fed into the first stage which is sized
and designed to get the full use of the total basket
length.
Thanks to Kadant’s new patented concept, “the
Intermediate De-flocculation Device with Dilution
(ID3™)”, the separation between fiber and
contaminants is extremely efficient. The reject arrives
in the second zone under ideal conditions to optimise FiberNET™ ID3 cylinder & rotor
the screening in terms of throughput and efficiency.
FiberNET™
C
V
E
O F
R A1
B
D
A2
E
Or O
©
Kadant 2009 – ref. PP0003 rev. 00
The information in this document is subject to change
without notice.
MB-329-A
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
MB-256-D
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
MB-243-A
60 NP Selectifier Screen
60 NP Selectifier Screen
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
ID2 Screen cylinder
& Rotor Technology
SCREENING
Patented Technology
APPLICATION
OPERATION
BENEFITS
• Increases considerably the capacity of your
existing screen at the same quality level and Standard
Screen Benefits of the ID2 Retrofit
reduces reject rate. Benefits Slots
of the ID2 Retrofit
Capacity Power
Standard
• Smaller slots can be utilised in your existing increase
width
Slots
Screen Capacityreduction
saving
Power
screens while capacity, consistency and long fibre Power
increase
width
reduction
saving
passage are improved. Consumption
100 133 100 70
Power
• Highest quality from your slot screening because Consumption
100 133 100 70
of finer slots and/or lower actual passing speed. Capacity 100 200 100 100
• Energy saving of 30% at the same capacity. Capacity 100 200 100 100
much
• Increased fibre yield, especially, long fibre means Quality same
higher
higher
* please see in the back of this page for instruction how to convert your existing slotted screens to KADANT LAMORT‘s new ID2 screening technology.
f The improvements, listed in the table above, you desire from your screening system
DIVISION
Kadant Lamort KADANT LAM ORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ISO 9001
Tel. : +33 (0)3.26.74.80.80 ASSURANCE
LICENSEE QUALITE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden AN ACCENT ON INNOV ATION
FOR TERRITORIAL RESPONSIBILITY,
Kadant BC Lamort UK, England REFER OUR WEBSITE
®
K-TEK basket & K-ROTOR
Low Maintenance, K-TEK baskets for centripetal screens
High Efficiencies
Applications
Features
Benefits
A robust basket and rotor combination for improved performance and lower costs
K-TEK® baskets and the K-ROTOR are combined for high-performance screening
applications. The advanced concept is designed for maximum screening efficiency and
lower reject rates.
©
Kadant 2008 – ref. PP0006 rev. 02
The information in this document is subject to change
without notice.
CH
Horizontal screen with enclosed rotor
CH 5
A N A C C E N T O N I N N O VAT I O N
CH
Horizontal screen
Stock reaches a chamber ensuring thick or heavy-weight bodies • Working consistencies between
are not forced between rotor and screen basket - normal flow of 2 and 4 % with a drilled screen
stock to be treated - thus avoiding any damage to the unit basket, and up to 3.5 % with a
(fig. 1). slotted basket, depending on
its calibration.
Foils on the rotor drive the stock at high speed, so that it • No fractionating of
approaches the screening surface at a very sharp angle relative contaminants.
to the tangent line of the screen basket (fig. 2), ensuring
excellent screening and sorting quality. • Special design of enclosed
rotor, avoiding any string
formation.
EXEMPLES OF APPLICATIONS
CHARACTERISTICS CONSTRUCTION
SPACE REQUIREMENT
DIVISION
Kadant Lamort
33700 MERIGNAC France KADANT LAMORT
Tel. : +33 (0)5.57.92.16.00 B.P. 46
Fax : +33 (0)5.56.47.84.64 51302 VITRY-LE-FRANCOIS Cedex QUALITY
France
ASSURANCE
LICENSEE QUALITE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
Designed to Perform For applications where high debris levels exist, an optional top
cover is available featuring a center rejects outlet and integral
dilution port. Working together, the rejects outlet and dilution
Kadant’s Ultra-V screen is designed to meet today’s rigid
port provide optimized reject control, i.e. consistency and rate.
standards of efficiency, capacity and durability. Our engineers
The contoured styling of this cover also reduces the opportunity
use the most advanced digital technology in Computational
for wear to occur due to orbiting debris. The Ultra-V’s overall
Fluid Dynamics (CFD) and Finite Element Analysis (FEA) to test
body design, coupled with its well-proven performance,
each element of the screen’s operation and construction. This
provides unparalleled reliability and efficiency.
attention to detail translates into the most innovative designs
in body style, rotor options and screen cylinder contours. In
The latest cylinder and rotor design technologies are available
short, the Ultra-V is designed to bring optimum performance to
with the Ultra-V screen line to suit any application requirement.
your screening operation in all applications.
A wide range of screen cylinder contours and opening sizes are
available in both drilled hole and slotted designs. Also, multiple
Many contaminants found in the papermaking slurry are
adjustable rotors are available – standard foils, low pulse, low
lightweight particles. Other vertical screens are fed at the
power (LP-I) and, non-stringing (NS-III). The correct rotor, when
top and rejects are discharged at the base of the screen body.
mated with the proper screen cylinder option, provides a high
In such screens, the lightweight contaminants remain in the
quality pulp with proven screen performance.
screening area far too long, and could potentially be accepted
before they move downward to the reject chamber. Heavy
contaminants passing through the screening area can also catch
in the rotor mechanism, causing serious damage to the screen
cylinder and rotor.
MAXIMIZED SCREENING ZONE • PATENTED UP-FLOW DESIGN • POSITIVE HEAVY REJECT REMOVAL
Vertical Pressure Screen
Design Features
Inlet pipe at bottom, discharge pipe
at top – eliminates any pipe crossing
and lowers installation costs
Heavy, rugged base with open
design provides easy access to belts,
sheaves and retainer bolts and makes
maintenance easier
Heavy duty drive and mechanical
seal assembly can be removed as
a unit and reduces downtime for
maintenance
Cylinder and rotor are easy to access
for cleaning, adjustment, inspection
and removal
Long lasting 316L stainless
construction for all wetted parts
Units ruggedly designed for 125 psi
operating pressure
Benefits
Heavy debris rejected to junk box
in bottom, preventing wear and
damage to rotor/screen cylinder
– saves downtime
Lightweight debris and air removed
immediately through top reject
– better quality pulp
More efficient debris removal
– contaminants remain in screening
zone for less time, substantially
lowering the possibility of
recirculation
Lower inlet pressure requirements
lowers the cost of operation
All screen cylinder designs, i.e.
smooth, contoured, holed, slotted,
etc., can be used.
NS-III Non-Stringing
LowPulse Rotor LPH LowPower Rotor Foil Rotor Adjustable Rotor
Ultra-V Vertical Pressure Screen
www.kadant.com
Contact us:
KADANT LAMORT
39, rue de la Fontaine Ludot
BP 30046
51302 Vitry-le-François cedex
France
Tel: +33 3 26 74 80 80
Fax: +33 3 26 72 08 33
info@kadant.com
©
Kadant 2008 – ref. PP0010-0
The information in this document is subject to change
without notice.
Diabolo®
Pressurized auxiliary reject screen
High-Efficiency
Reject Processing
Benefits
Examples of Application
www.kadant.com
Diabolo®
Tel: +33 3 26 74 80 80
Fax: +33 3 26 72 08 33
info@kadant.com
©
Kadant 2008 – ref. PP0011 rev. 00
The information in this document is subject to change
without notice.
59-SBB
Wandel Screen
Vibrating Screen
Wandel Screen
Wandel Screen
Capacity and consistency vary with type of fiber and hole or slot size.
DIVISION
Kadant Lamort
33700 MERIGNAC France KADANT LAMORT
Tel. : +33 (0)5.57.92.16.00 B.P. 46
Fax : +33 (0)5.56.47.84.64 51302 VITRY-LE-FRANCOIS Cedex QUALITY
France
ASSURANCE
LICENSOR QUALITE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
FibreWall™ Screen Cylinder
High-Efficiency Screening
Ap p l i ca ti o ns
F e a ture s
Be ne fi ts
Unique construction
The FibreWall basket is a fabricated wedge wire basket made without structural
welding or rolling processes. The wire clamping is made mechanically using an
innovative process that eliminates welding and other processes that can permanently
deform the cylinder shape.
The basket is not rolled, and offers excellent roundness with no distortion. This allows
for a uniform gap between the cylinder and the rotor to achieve optimum screening
performances. The basket also offers dimensional stability over time due to the
absence of residual stress caused by welding or rolling processes. The FibreWall basket
is a rugged and robust design that can be used in the most adverse conditions.
KADANT LAMORT
39, rue de la Fontaine Ludot
Customer testimonials BP 30046
We have run the FibreWall cylinder for three years without any breakages. We were 51302 Vitry-le-François cedex
extremely impressed by the performance on stickies removal. Our efficiency went from France
60% to more than 90% on average.
Tel: +33 3 26 74 80 80
Recycle Superintendent, DIP mill, USA
Fax: +33 3 26 72 08 33
We were about to order new screens to replace non-performing screens in our DIP kadant.lamort@kadant.com
line. FibreWall was our last hope to improve the existing inflow screens. We installed a
FibreWall unit on a tertiary screen and immediately we noticed that the accept quality in
terms of stickies was better than the quality of the primaries accept. We tested a second
FibreWall screen cylinder on one of our primary screens and the stickies level was reduced
by a factor of three.
Recycle Superintendent, DIP mill, Canada
FibreWall-1000 (KLT) 09/2010
© 2010 Kadant Inc.
Research & Customer Services
Development Centre
Pilot Plant Testing
Kadant offers pilot plant testing in its Fiberline research and testing facility in
Field Service
Vitry-le-François - France.
Projects, large or small, are tailored to a mill’s individual needs, and can be run on full scale, Inspection Service
mill-sized equipment. By simulating operating conditions in a pilot plant environment, we
assist our customers in evaluating their own system’s potential to produce a higher quality
pulp, more economically. All trial work is performed by seasoned engineers, technicians
Repairs & Rebuids
and mechanics with years of applications experience in the pulp and paper industry. Tests
results are evaluated in fully equipped wet labs using a broad spectrum of analytical and test Maintenance Programs
instrumentation to assure the most reliable test data.
Tap into Kadant’s knowledge and expertise for your next process trial or system evaluation. Spare Parts
A technological centre to suit the need of papermakers
1250 sq. m. of expertise Process Consulting
Our pilot plant is geared towards stock preparation, and in particular recycling, an area
in which our know-how is hightly regarded throughout the world. Our machines are
of industrial size and concept, so offering a testing ground that will compare with your
production process.
This centre is also an efficient test base for our own R&D team.
A friendly meeting-place within Kadant’s industrial complex
The Kadant centre is at your disposal. You will be assisted by several specially trained
technicians led by a research engineer.
A full-scale centre incorporating pioneering solutions for recycling
You will be able to work with the latest in recycling machinery. We have gathered
together in our Trial Centre, experiences gained worldwide from several decades at the
forefront of papermaking technology.
A training centre for paper recycling techniques
CUSTOMER SERVICES HOTLINE
A line with different modules combining all of the Kadant innovations:
Tel : +33(0) 326 748 022
Fax: +33(0) 326 748 899
kadant.lamort@kadant.com
Rupulping &
storage
www.kadant.com
Control Room
Waste Water
treatment Contact us:
KADANT LAMORT
39, rue de la Fontaine Ludot
BP 30046
51302 Vitry-le-François cedex
France INNOVATIVE SOLUTIONS BY PROVEN EXPERTS
Tel: +33 3 26 74 80 80
Fax: +33 3 26 72 08 33
CUSTOMER SERVICES HOTLINE kadant.lamort@kadant.com
for a rotor
Kadant Inspection services include:
Inspection and evaluation of current condition
Detailed report with value assessment K-TEK® baskets K-TEK® baskets
Maintenance needs report for centripetal screens for centrifugal screens
Fast-track quote on recommended repairs
Upgrade recommendations
Severe wear recommendations
BEFORE AFTER
Spare parts recommendations
Equipment history by serial number
Original engineering documents
Assembly drawings at time of inspection
No. MB-246-F
FEATURES / BENEFITS
APPLICATIONS
Hydradenser™ Inclined Screen Thickener
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
WATER EXTRACTOR
• No water consumption
Extensive production
range with 4 models
A N A C C E N T O N I N N O VAT I O N
WATER EXTRACTOR
WATER EXTRACTOR
WATER EXTRACTOR
WATER EXTRACTOR
WATER EXTRACTOR
SPACE REQUIREMENT
DIVISION
Kadant Lamort
33700 MERIGNAC France KADANT LAMORT
Tel. : +33 (0)5.57.92.16.00 B.P. 46
Fax : +33 (0)5.56.47.84.64 51302 VITRY-LE-FRANCOIS Cedex QUALITY
France
ASSURANCE
LICENCIE QUALITE
FILIALES
Kadant Lamort GmbH, Allemagne
Kadant Lamort SA, Espagne
Kadant Lamort S.r.l., Italie
Kadant Lamort Ltda, Brésil
Kadant Cyclotech, Suède Pour trouver votre contact :
DIVISION
Kadant Lamort KADANT LAMORT
33700 MERIGNAC France B.P. 46
Tel. : +33 (0)5.57.92.16.00 51302 VITRY-LE-FRANCOIS Cedex QUALITY
ASSURANCE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
Kadant BC Lamort UK, England www.kadanteurope.com
GYROCLEAN ®
LIGHT REJECT ROTARY CLEANER
CTP / KADANT LAMORT licence
A N A C C E N T O N I N N O VAT I O N
GYROCLEAN®
LIGHT REJECT ROTARY CLEANER
CTP / KADANT LAMORT licence
WORKING PRINCIPLE
APPLICATIONS
• Wood pulp : removal of plastic beads
• Annual plant pulp : removal of polypro-
pylene beads and wires, e.g. bagasse,
cotton linters, etc.
• Waste paper pulp : removal of plastic
beads, polystyrene, polyethylene films,
some adhesives, hot-melt fragments
- the so-called stickies, etc.
• Deinked pulp for newsprint, printing,
and writing, tissue, etc.
• Approach flow : fine grades, currency
The Gyroclean operating in a deinked stock system paper, coating base, etc.
CONSTRUCTION
MAIN FEATURES
DIVISION
Kadant Lamort
33700 MERIGNAC France KADANT LAMORT
Tel. : +33 (0)5.57.92.16.00 B.P. 46
Fax : +33 (0)5.56.47.84.64 51302 VITRY-LE-FRANCOIS Cedex QUALITY
France
ASSURANCE
LICENSEE QUALITE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
ADS
Double separation screen
WORKING PRINCIPLE
APPLICATIONS RESULTS
SPACE REQUIREMENT
DIVISION
Kadant Lamort
33700 MERIGNAC France KADANT LAMORT
Tel. : +33 (0)5.57.92.16.00 B.P. 46
Fax : +33 (0)5.56.47.84.64 51302 VITRY-LE-FRANCOIS Cedex QUALITY
France
ASSURANCE
LICENSEE QUALITE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
A N A C C E N T O N I N N O VAT I O N
MAC CELL
Deinking cell
APPLICATIONS
FUNCTION
MAC CELL
Deinking cell
ADVANTAGES PERFORMANCE
MAC CELL
Deinking cell
* This data is given for information only. It may be modified, without notice, according to design changes in the equipment.
DIVISION
Kadant Lamort
33700 MERIGNAC France KADANT LAMORT
Tel. : +33 (0)5.57.92.16.00 B.P. 46
Fax : +33 (0)5.56.47.84.64 51302 VITRY-LE-FRANCOIS Cedex QUALITY
France
ASSURANCE
LICENSEE QUALITE
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
Kadant Cyclotech, Sweden To find your local contact, refer to:
FEATURES / BENEFITS
Liqui-Filter™ Pressurized Fiber Filter
DIVISION
Kadant Lamort
KADANT LAMORT
33700 MERIGNAC France
B.P. 46
Tel. : +33 (0)5.57.92.16.00
51302 VITRY-LE-FRANCOIS Cedex QUALITY
LICENSOR
Fax : + 33 (0)3.26.72.08.33
Kadant Black Clawson Inc.
informations@kadanteurope.com
www.kadanteurope.com
AGENTS
More than thirty agents all over the world
SUBSIDIARIES
Kadant Lamort GmbH, Germany
Kadant Lamort SA, Spain
Kadant Lamort S.r.l., Italy
Kadant Lamort Ltda, Brazil
To find your local contact, refer to: A N A C C E N T O N I N N O VAT I O N
Kadant Cyclotech, Sweden
Kadant BC Lamort UK, England www.kadanteurope.com
Product
bulletin
MB-377
K-WAVE BENEFITS
• High slot accuracy
• Precise slot distribution
• Rugged, high mechanical strength
Frequency (%)
APPLICATIONS
• OCC processing
• Deink fine screening
• Approach flow screening
Slot Width Deviation (in)
7312 Central Parke Boulevard, Mason, OH 45040 USA 513.229.8100 Fax: 513.229.8194 www.kadantbc.com
Float Purger™
Stock Screening System Rejects
Features / Benefits
Energy efficient
The Float Purger™ Stock Cleaning System operates on the primary screen reject flow in
the coarse screening loop of any long fiber furnish that is heavily contaminated. This
field proven machine incorporates three basic functions:
The action of the bottom rotor sets up a strong vortex forcing light contaminants
to the center of the air core. The reverse dish at the top of the unit insures that the
contaminants are removed at the lowest pressure point, providing high removal
efficiency.
A defibering action occurs between the bottom rotor and the extraction plate. The
accepted pulp usually is returned to the pulper tub.
Kadant supplies a range of systems
3. Collection and removal of heavy grit for stock preparation, sheet forma-
tion, fabric conditioning,
Centrifugal force pushes heavy contaminants into a tapered reject channel around the water filtration, and doctoring.
periphery of the extraction plate. This debris is removed through a continuous bleed. Our website has more details on
our products and services.
www.kadant.com
Contact us:
KADANT LAMORT
39, rue de la Fontaine Ludot
BP 30046
51302 Vitry-le-François cedex
France
Tel: +33 3 26 74 80 80
Fax: +33 3 26 72 08 33
info@kadant.com
©
Kadant 2008 - PP0009rev. 0
The information in this document is subject to change
without notice.
E W
Float Purger™ N
NEW : now rejects on drum with slots Rejects
Features / Benefits
Energy efficient
Low maintenance
The Float Purger™ Stock Cleaning System operates on the primary screen reject flow in
the coarse screening loop of any long fiber furnish that is heavily contaminated. This
field proven machine incorporates three basic functions:
Contact us:
KADANT LAMORT
39, rue de la Fontaine Ludot
BP 30046
51302 Vitry-le-François cedex
France
Tel: +33 3 26 74 80 80
Fax: +33 3 26 72 08 33
kadant.lamort@kadant.com
©
Kadant 2010 - PP0017 rev. 0
The information in this document is subject to change
without notice.
TOP-FINER
MODEL "A", "B" PULP & BROKE DEFLAKER
The Top-Finer is a high speed deflaker, used primarily for defibering a market pulp and
various kinds of brokes. To obtain high quality product and better strength characteris-
tics, the pulp and broke must be perfectly deflaked before refining.
With the Top-Finer, fiber bundles and flakes are completely deflaked into individual fibers
by hydro-dynamic shock waves created with specially designed fillings which rotate at a
high speed of 1800 to 3600 r.p.m. 60 Hz and 1500 to 3000 at 50 Hz.
Since the fibers are never cut nor damaged, the freeness drop is small (20 to 30 C.S.F.).
KADANT LAMORT
B.P. 30046
51302 VITRY-LE-FRANCOIS Cedex
SISTER COMPANY
France
QUALITY
ASSURANCE
Wet End
Filtration
Showering
Cleaning & Conditioning
Doctoring
Tail Cutting
Dry End
Chemical Application
Yankee Doctoring
Calender/Reel Doctoring
2
The new ScreenONE™
is a complete
screening system in
one machine
Cyclotech™ cleaners
provide high
efficiency removal of
small particles such as
dirt specks
Stock Preparation
& Approach Flow
Kadant supplies cost effective stock High density cleaners: early in the
preparation and approach flow system to remove heavier debris such
systems for both virgin and recycled as stones, paper clips, course sand
pulp, assuring highest quality and and wire etc.
return on investment.
Small diameter, high centrifugal force,
cyclones: later, for the removal of
smaller lighter contaminants such as
dirt, inks, fine sand and some stickies.
Pulping
High Consistency Pulping Reverse cleaners: to remove lightweight
particles such as wax and most stickies.
Helico pulpers provide excellent
defibering by reducing good fiber losses Kadant supplies equipment to satisfy
and saving heat, energy and chemicals. the above requirements.
Further advantages include superior ink
detachment from white waste paper and • Kadant EPE and Kadant Liquid
better physical properties for virgin fiber. Cyclones for high density
application
The Kadant HeliPoire combines the best • Kadant Cyclotech Cleaners for
features of the Helico pulper and the fine cleaning
Dumping Poire or Batch Scavenger. It is • Kadant Ultracones and Gyrocleans
an efficient detrashing system for for the reverse cleaning
contaminant removal without breaking
up non-fibrous materials – often Screening removes contaminants
eliminating the need for course screens. defined by size: course screens for
large debris and fine slotted
Low and Medium Consistency Pulping screens for very small.
4
Wet End
Crescent Former
5
Showering Mist Elimination
Kadant offers advanced oscillating and Mist around tissue machines can lead
high-pressure showers designed to production loss due to extra clean-
specifically for the demands of up time, sheet breaks and poor sheet
high-speed tissue machines. Along with quality. Kadant’s Mist EliminatorTM is
increased production efficiencies, a mist-free high pressure cleaning
the effective use of showers delivers: system that provides:
6
Felt Cleaning & Conditioning Doctoring
As the use of recycled fiber increases, Wet end doctoring is critical to sheet
the cleaning of forming, press and formation and quality. If ignored,
dryer fabrics becomes even more debris on wire/felt return rolls can
critical. This fiber source causes cause sheet defects and reduce
greater contamination throughout machine clothing life. Selection of
the process and is more difficult correct blade material is important
to remove than contaminants for roll cleaning and efficient
associated with virgin fiber. removal of water/fines for overall
Therefore, cleaning systems must reduction in roll wear.
be used on a continuous basis and
Couch and suction roll doctoring
include the use of chemicals for
enhances sheet consistency, reduces
successful contaminant removal.
variation in moisture profile.
Specific blade materials such as
Kadant solutions for more difficult
Softek® have been developed for
cleaning applications may include:
doctoring soft, wet end rolls.
High efficiency wet end doctoring
• Fabric brush assemblies with
results in:
integrated rotating fabric brush
and brush cleaning shower
assemblies that are highly • Cleaner rolls
effective for removing • Better sheet formation
surface contaminants from • Longer blade and roll life
machine fabrics • Enhanced felt and wire life
• Vacuum suction box and suction
pipe assemblies that provide
custom dewatering and high
efficiency exhausters specific to
your needs
7
Double Doctoring Tail Cutting
The single most important wet end Where appropriate, wet end tail
doctors used on tissue machines are cutters speed up the process of
for couch, suction press and pressure threading the sheet to the Yankee.
rolls. Double doctoring in these Wet end tail cutters are equipped
positions has revolutionized water with variable positioning. These can
removal on these rolls. Traditional be operator controlled or set to
rubber wipes used extensively in pre-defined positions. It is important
these positions actually hinder water to have good sheet edge quality to
removal. Double doctors not only avoid costly downtime related to
remove the excess water/fines but edge breaks during threading.
significantly improve moisture A high pressure nozzle with a precise
profiles, fabric life, vacuum efficiency jet ensures quick thread up times.
and sheet consistency. Sheet
rewetting in these positions can • Ease and speed of threading.
be easily prevented with double • Reduced downtime.
doctors. • Variable positioning aids
different trim widths.
• Cleaner roll surfaces.
• Cleaner holes in roll shells.
• Reduced wear on vacuum box
seal strips.
8
Dry End
9
Cut-Off
Creping
Cleaning
w w w. k a d a n t . c o m
ISSUE 1 2005
Kneader
TL 1 - TL 2 - TL 2SC -TL3
Hot Dispersion System
A N A C C E N T O N I N N O VAT I O N
KNEADER
TL 1 - TL 2 - TL 2C - TL 3
The Kadant Lamort Kneader is mainly composed of a shaft which is fitted with a feed screw and kneading
cogs of special design, as well as of a body with stationary kneading cogs on its inner surface. During the
operation of the unit the cogs of shaft rotate between those belonging to the body.
The space between the stationary and rotating cogs permits to avoid any detrimental cut of contaminants
and any jamming of the unit.
Expanded steam is fed into the Kneader body through several orifices divided on its whole length.
The developed mechanical friction force to which the stock is submitted between the stationary and
rotating cogs is already sufficient to bring the temperature up to 50 °C. The additional action of steam - in
the range of 50 to 100 °C, depending upon application - has the purpose to produce the total dispersion
or to favour the softening of certain contaminants for their ulterior final elimination.
As to the capacity and the length of the Kneader, they were designed so that the stock is submitted to an
intensive friction during a sufficient space of time.
The stock leaves the unit through an adjustable air-operated pressure trap of which the control could be
combined with the absorbed power. This pneumatical trap will, if necessary, delay the outflow of
processed stock to permit the extension of dwell time in the Kneader.
A special control device permits to submit the steam output to the selected working temperature.
The stock after treatment, is generally carried into a mixing chest where it undergoes a dilution to 5 % or
into a small cycling chest fitted with a disintegration device.
Kneader type TL 2
www.kadanteurope.com
A N A C C E N T O N I N N O VAT I O N