This document summarizes the technical details of a balancing service performed on a compressor screw weighing 9 kg. The screw rotated at 1800 RPM and was balanced dynamically. It had an initial imbalance of 1.8 g and 2.6 g on plans 1 and 2, respectively. After balancing, the imbalance was reduced to 0.220 g and 0.180 g on each plan, within the allowed tolerance of 1 g. The service was performed on January 19, 2024 by Wischral Balanceamento e Manutenção LTDA.
This document summarizes the technical details of a balancing service performed on a compressor screw weighing 9 kg. The screw rotated at 1800 RPM and was balanced dynamically. It had an initial imbalance of 1.8 g and 2.6 g on plans 1 and 2, respectively. After balancing, the imbalance was reduced to 0.220 g and 0.180 g on each plan, within the allowed tolerance of 1 g. The service was performed on January 19, 2024 by Wischral Balanceamento e Manutenção LTDA.
This document summarizes the technical details of a balancing service performed on a compressor screw weighing 9 kg. The screw rotated at 1800 RPM and was balanced dynamically. It had an initial imbalance of 1.8 g and 2.6 g on plans 1 and 2, respectively. After balancing, the imbalance was reduced to 0.220 g and 0.180 g on each plan, within the allowed tolerance of 1 g. The service was performed on January 19, 2024 by Wischral Balanceamento e Manutenção LTDA.