Name of the Staff : Vishala I L, Dr Sudir P DATE: 17-12-2023
SUBJECT : Multimedia Communication (18EC743) SEM/SEC: VII A/B/C
Q No Questions Marks CO Bloom’s
levels 1. Using block diagram explain H-261 video encoder principle. 10 CO3 L2 2. Explain MPEG encoder and decoder principles with neat 10 CO3 L2 diagram 3. Explain with the help of diagram for the signal encoder and 10 CO3 L2 decoder and explain how better sound quality for the same bit rate can be obtained using a sub-band coding ADPCM. 4. Using block diagram explain H-263 error tracking scheme. 10 CO3 L2 5. Solve a digitized video to be compressed using the MPEG-1 standard, assuming a frame sequence of: IBBPPBBPPBBI….. average compression ratios of 10:1 (I), 20:1 (P), and 50:1 (B), 10 CO3 L3 drive the average bit rate that is generated by the encoder for both the NTSC and PAL digitization format 6. Explain video streaming architecture with neat diagram. 10 CO3 L2 7. Explain the different instances that may cause the end to end 10 L2 CO2 delays in ATM networks. 8. Explain CSMA/CD With Neat Diagram 5 CO2 L1 9. Using neat block diagram how distortion is measured in terms 10 CO2 L2 of quantization parameter in R(D) model. 10. Explain LAN Protocols and protocol frame work. 10 CO2 L2 11. Describe the operation of ARP and RARP. CO2 12. Explain fragmentation and reassembly in the internet in detail. CO2 13. Explain in detail token ring configuration, frame formats, 10 CO2 L2 transmission and reception with priority operation. 14. Derive the maximum obtainable throughput and maximum CO2 access delay for the following three ring configuration assume a TTRT of 4ms has been chosen for each configuration i) 2km ring with 20 stations. 10 L3 ii) 20km ring with 200 stations. iii) 100km ring with 500 stations.