Professional Documents
Culture Documents
Content
About Us 4
TEGO Additives 8
Deaerators 10
Defoamers 11
Wetting and Dispersing Additives
for Pigment Concentrates 12
Wetting and Dispersing Additives for Direct Grind 13
Surface Control Additives 14
Radiation-Curing Multifunctional Additives 15
Substrate Wetting and Anti-Cratering Additives 16
Hydrophobing Agents 17
Anti-Graffiti Additives 18
Others 19
TEGO Co-Binders 20
TEGO® VariPlus 22
TEGO® AddBond 23
TEGO Nanoresins 32
Silica Nanocomposites 34
ALBIDUR® 36
ALBIFLEX® 37
Basic functions
Functionalities
· Deaerators
· Defoamers
· Wetting and Dispersing Additives
· for Pigment Concentrates
· for Direct Grind
· Surface Control Additives
· Radiation-Curing Multifunctional Additives
· Substrate Wetting and Anti-Cratering Additives
· Hydrophobing Agents
· Anti-Graffiti Additives
· Others
Deaerators
Polyester/melamine
UV PU/waterborne
2-pack solvent-free
Alkyd/melamine
Styrene acrylic
Unpigmented
2-pack epoxy
Solventborne
Waterborne
Acid-curing
UV acrylate
High solids
PU/acrylic
Pigmented
2-pack PU
Acrylate
Alkyd
UPE
NC
UV
Product
TEGO® Foamex N ▯ ▯ ▯ ▯ ▯ ▯
1
silicone-free
Let-down stage
Styrene acrylic
Grinding stage
Unpigmented
2-pack epoxy
Vinyl acetate
foam formation during production and
PU/acrylic
Pigmented
2-pack PU
Polyester
application of waterborne coatings and
Acrylate
Others
Alkyd
printing inks. Pre-existing foam is de-
PU
Product
stroyed and air inclusions are prevented.
TEGO® Foamex 1488 ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯
1
silicone-free
2-pack solvent-free
Inorganic pigments
Non-polar solvents
Universal pigment
Binder-containing
Organic pigments
stabilization. They prevent floating, flood-
Carbon blacks
Polar solvents
concentrates
Waterborne
ing, and settling of pigments so that color
Binder-free
coverage and intensity remain consistent
Fillers
during storage. They ensure maximum Product
color yield for the pigment, while also
TEGO® Dispers 650 ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯
minimizing the number of milling steps.
Because these additives lower viscosity, TEGO® Dispers 652 ▯ ▯ ▯ ▯ ▯ ▯ ▯
well with TEGO® Dispers 656, 670, and TEGO® Dispers 760 W ▯ ▯ ▯ ▯
Inorganic pigments/
Mixed pigmentation
2-pack solvent-free
Organic pigments/
Styrene acrylic
Solventborne
Carbon black
(inorg./org.)
Vinyl acetate
Waterborne
High solids
copolymer
Acrylate
2K PU
2K EP
Fillers
Alkyd
PES
UV
PU
Product Remark
Anti-blocking/scratch resistance
tives, TEGO® Glide and TEGO® Flow,
improve the flow/leveling and reduce
cratering. They prevent pigment flooding
and flotation. Slip and anti-blocking of a
coating can be adjusted.
Solventborne
Low foaming
Waterborne
Compatible
Recoatable
Leveling
Slip
Product UV Remark
1
silicone-free
Low foaming
Compatible
linkable, acrylate additives for radiation-
Recoatable
Wetting
Release
curing formulations. These multifunctional
Flow
Product
Solventborne
Low foaming
Waterborne
TEGO® Wet and TEGO® Twin substrate
Anti-crater
Dynamic
wetting and anti-cratering additives ena-
Static
ble uniform wetting for coatings and
UV
Product
printing inks, even on very low energy or TEGO® Twin 4000 ▯ ▯ ▯ ▯
contaminated surfaces. Good wetting is
TEGO® Twin 4100 ▯ ▯ ▯ ▯ ▯ ▯
a fundamental prerequisite for optimum
adhesion. Defects in the coating surface – TEGO® Twin 4200 ▯ ▯ ▯ ▯ ▯ ▯ ▯
1
silicone-free
Impregnation
Printing inks
Waterborne
and plasters
and plasters
strong early
TEGO® Phobe 1650 ▯ ▯ ▯ ▯ ▯ water resistance
Hydrophobing Weather
resistance
coatings with anti-graffiti and easy-to- for matte, unpigmented and/or pigmented formulations,
clean characteristics. This range of prod- TEGO® Protect 5000 N 1–3% especially good release properties
ucts can be used in solvent or waterborne for clear coats, marked water-beading effect, high
coatings. TEGO® Protect 5001 2–5% solvent resistance
Reduced drying-up
Hammer finish
Solventborne
Solvent-free
Waterborne
Anti-static
UV
Product
ADDID® 240 ▯ ▯ ▯ ▯
ADDID® 900 1
▯ ▯ ▯ ▯
1
containing silicone
Anti-static Adhesion
· TEGO® VariPlus
· TEGO® AddBond
TEGO® VariPlus products are widely Several TEGO® VariPlus products can be
compatible hard resins used as co-binders used as pigment concentrate resins for
in paints, lacquers, printing inks, and the most diverse pigments. This enables
Anti-settling Drying speed Flow character-
other inks. They not only increase the excellent gloss to be obtained even at istics
solids content and accelerate drying high pigment loading.
speed, but they also improve numerous
properties: hardness, gloss, and film Resins such as TEGO® VariPlus SK and
build. Adhesion on various substrates is TEGO® VariPlus CA which contain Gloss Hardness Pigment wetting
increased, which – combined with its re- hydroxyl groups are also used for modifi-
sistance to hydrolysis – enhances corro- cation of (for example PUR) binders.
sion protection.
Appearance
TEGO® VariPlus
Pigment wetting and stabilization
increased solids content
Viscosity reduction/
Adhesion to plastic
Adhesion to metal
Solventborne
Waterborne
Drying time
Hardness
Gloss
UV
Product Remark
The TEGO® AddBond range of products products are frequently used in primers
comprises special, widely compatible pol- (to increase, for example, corrosion pro-
yester resins which improve the adhesion tection).
of the most diverse coating and printing Adhesion Corrosion
protection
Appearance
TEGO® AddBond
Fixation of aluminum pigments
Adhesion on plastic
Adhesion on metal
Solventborne
Waterborne
Flexibility
Hardness
UV
Product Remark
· Silicone-Epoxy Resins
· Silicone Resins
· Silicone-Polyester Resins
· High Solids Silicone Hybrid Resins
· Silicone-Modified Polyurethane Emulsion
· Reactive Silicone-Based Resin Components
The product group SILIKOPON® and the Product Non-volatile content Remark
Silicone Resins
Curing systems
SILIKOPHEN® P 80/X 80 % solventborne, good air drying, for low VOC formulations
high solids, solventborne, ambient curing, good flexibility during the heating
SILIKOPHEN® AC 900 90 % and the cooling process
solvent-free, ambient curing, good flexibility during the heating and the
SILIKOPHEN® AC 1000 100 % cooling process
With products of the SILIKOFTAL® brand, with those of polyesters (such as low
Evonik offers a wide range of aromatic thermoplasticity, high flexibility, and good
silicone-polyester resins tailored to meet pigmentability).
Heat resistance Appearance
specific customer requirements. The
building blocks of the SILIKOFTAL® prod- The SILIKOFTAL® products comply with
uct range are chemically linked. FDA/BfR* regulations, making them par-
ticularly suitable for inner / outer coatings
This brand combines the properties of sil- for cooking utensils and bakeware.
icones (such as heat resistance, weather-
ing resistance, and low surface tension)
Silicone-Polyester Resins
retains hardness from room temperature to 150 °C; long-term heat resistance
SILIKOFTAL® HTT 80 % to 250 °C; good detergent resistance. (FDA/BfR)*
SILIKOFTAL® HTL 2 50 % high gloss, low thermoplasticity, good detergent resistance. (FDA/BfR)*
very good yellowing resistance up to 200 °C, very good boiling water
SILIKOFTAL® HTL 3 30 % resistance. (FDA/BfR)*
* U.S. Food and Drug Administration/German Federal Institute for Risk Assessment
SILIKOTOP® resins are aliphatic silicone SILIKOTOP® E 900 and SILIKTOP® E 901 ized by their flexibility and mechanical
hybrid resins with high solids content. are low viscosity, isocyanate-crosslinking stability. In addition, both products offer
These resins provide excellent properties silicone polyester resins used for corro- excellent processability and good appear-
for the formulation of coatings with low sion protection in top coat applications. ance.
VOC content in general industrial appli- Both products provide chemical and
cations. weather resistance. They are character-
1
new
The TEGOMER® range of products The use of TEGOMER® products as reac- binder. With the addition of the
consists of linear, reactive polydimethyl tive co-binders or coatings additives TEGOMER® products, the properties of
siloxanes with various terminal functional enables unique siloxane properties – flexi- the coating can be further optimized.
groups. These are specially developed for bility, water repellency, dirt repellency,
modifying binders such as polyurethanes, weather resistance, and slip – to be incor-
acrylic resins, polyesters, and epoxides. porated into the profile of the organic
· NANOCRYL®, NANOPOX®
and NANOPOL®
· ALBIDUR®
· ALBIFLEX®
Technical Data
NANOPOX® C 620 EEC cycloaliphatic epoxy resin for cationic curing 40 4,000
Scratch Appearance
resistance
Technical Data
NANOPOX® C 680 50 TMPO 232 200 reactive diluent for cycloaliphatic systems
Scratch Appearance
resistance
Technical Data
Dynamic viscosity,
Product Characterization SiO2-content [w/w%] 25 °C [mPa · s]
Scratch
resistance
Technical Data
mers:
• the epoxy component provides excel-
lent adhesion to numerous substrates,
high mechanical strength, and good
chemical resistance
Technical Data
This online initiative enables you to obtain For a detailed overview of seminars,
important and useful information on our conditions of participation and
products and their dynamic functionalities. registration, please visit our homepage
Participants can communicate directly at www.tego.us – Seminars.
with our experts via a chat function while
keeping the user’s identity hidden. The You are cordially invited to take part
platform gives you and your team direct in our free web seminars!
access to information and training from
the location you deem most convenient.
All you need is a PC and an Internet
connection.
Masthead
Published by
Evonik Corporation
P.O. Box 34628
Richmond, VA 23234
USA
Design
MERZ Werbeagentur, Düsseldorf
TEGO®, SILIKOFTAL®, SILIKOPHEN®, SILIKOPON®, SILIKOPUR®, SILIKOTOP®, ADDID®,
Copyright
TEGOMER®, NANOCRYL®, NANOPOX®, NANOPOL®, ALBIFLEX®, ALBIDUR® The editorial matter, pictures or text,
are registered trade marks of Evonik Industries AG or one of its subsidiary c ompanies and may not be reproduced without the
are written in capital letters. publisher’s prior permission.
Contact
Further information you can find under www.tego.us asktego@evonik.com
TEGO Hotline +1 888 ask-tego
Americas Canada Europe
Evonik Canada, Inc.
USA Phone +1 905 319-4186 Germany
Evonik Corporation Fax +1 905 633-7553 Evonik Industries AG
Phone +1 804 727-0700 Phone +49 201 173-2222
Fax +1 804 727-0845 Colombia Fax +49 201 173-1939
INCOPACK S.A.
Argentina Phone +57 4 313-0164
Mayerhofer Argentina S.A. Fax +57 4 313-4988 Asia
Phone +54 11 4555-4003
Fax +54 11 4554-3915 Mexico P.R. China
Evonik Industries de México, Evonik Degussa Specialty
Brazil S.A. de C.V. Chemicals (Shanghai) Co.,
Evonik Degussa Brasil Ltd. Phone +52 555 483-1004 Ltd. Shanghai Branch
Phone +55 11 3146-4124 Fax +52 555 673-6649 Phone +86 21 6119-1000
Fax +55 11 3146-4140 Fax +86 21 6119-1149
Evonik Corporation
P.O. Box 34628
Richmond, VA 23234
USA
This information and all further technical advice are based on
phone +1 804 727-0700 our present knowledge and experience. However, it implies
no liability or other legal responsibility on our part, including
fax +1 804 727-0845 with regard to existing third party intellectual property rights,
www.tego.us especially patent rights. In particular, no warranty, whether
express or implied, or guarantee of product properties in the
www.evonik.com legal sense is intended or implied. We reserve the right to
make any changes according to technological progress or fur-
ther developments. The customer is not released from the ob-
ligation to conduct careful inspection and testing of incoming
goods. Performance of the product described herein should
be verified by testing, which should be carried out only by
qualified experts in the sole responsibility of a customer.
06_2015