Professional Documents
Culture Documents
Product description
Smooth Surface Finspartel is suitable for filling holes, cracks and small damages (up
to 2mm). Smooth Surface Finspartel has good adhesion on painted and
untreated wood. Can be sanded after 30 min.
Treatment
The substrate must be clean and dry (max 16% moisture) Previously painted
surfaces are sanded to a matte finish and sanding dust is removed. Knead the
tube thoroughly before use. Apply Finspartel with a spatula in a thin and even layer.
Fine putty can be sanded after 30 min. and overpainted after 1 hour (20c
50%RF) with most types of paint. Clean tools in lukewarm water after use. Technical data Technical data
Safety and the painted over: After 2 hours (at 1cm thickness) Can be painted over: After 2 hours (at 1cm thickness)
before disposal. Remove as much material as possible from tools before optimal) optimal)
cleaning. Empty packaging and liquid residues are handed over to the local recipient Packaging size: 200ml, 600 ml and 2.5 l. Packaging size: 200ml, 600 ml and 2.5 l.
hot air blower/flame or similar. health-damaging smoke and/or dust can form. Water Store: Frost-free Store: Frost-free
The data sheet should be seen as a guide. The specified values apply to normal conditions, and can therefore vary with e.g. layer
thickness, temperature, etc. We reserve the right to make changes without prior notice. The user is responsible for applying the latest
revision of this document. The check can be done on our website.
The trademarks AkzoNobel and Polyfilla are owned by the AkzoNobel Group of Companies © AkzoNobel 2009